• 한국해안·해양공학회논문집
• /
• 제24권4호
• /
• pp.247-256
• /
• 2012

본 연구는 다층지반으로 구성된 방조제의 침투변화에 따른 안정성을 검토하기 위하여 현장조사와 역해석 방법으로 투수계수와 침투수량을 결정하고, 제체의 변형량과 유실량 측정을 위하여 침투모형시험을 수행하여 가장 합리적인 수치해석 방법을 결정하였다. 검토결과 방조제는 다층지반구조물로 투수계수 차이에 의해 바닥보호공과 성토체 경계부에서 유실이 발생하고 이로 인해 방조제의 변형이 발생한다는 것을 예측할 수 있었다. 한편 침투모형 시험에 대한 수치해석결과 한계유속에 의한 방법은 실측치가 해석값보다 작게 나왔으나 그 경향이 유사하여 실제 단면에 적용 가능할 것으로 판단되었다.

• 한국지반공학회논문집
• /
• 제28권11호
• /
• pp.53-67
• /
• 2012

본 논문에서는 기존에 사용되던 철선 TDR계측선의 문제점을 해결하기 위해 스테인리스 스틸과 열수축튜브를 이용해 개량된 TDR계측선을 개발하여, 함수비에 대한 민감도를 높이고 노이즈를 줄이며 내구성을 향상시켜 TDR시스템의 현장적용성을 높였다. 개량된 TDR계측선을 이용하여 실내에서 포화도 변화실험과 아크릴모형실험을 수행하였으며, 실험결과 별도의 필터링 및 정량화 과정을 거치지 않은 초기 계측 그래프만으로 쉽게 포화, 불포화 및 건조구간을 파악할 수 있었다. 이후 대형 모형제방에 개량된 TDR센서를 설치하여 침투실험을 수행하였으며 그 결과, 실내시험과 같은 명확한 지하수 분포형태 파악이 가능하였으며, 침투 시간경과에 따른 각 구간의 지하수 분포변화를 파악할 수 있었고 손쉽게 모형제방의 침윤선을 작도할 수 있었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.689-696
• /
• 2008

In this study, seepage characteristics of breakwater in dredging ground evaluated for the piping stability estimation by scale model tests. For this, to estimated the seepage characteristics through the model tests and numerical analyses, the engineering stability on piping of breakwater evaluated based on scale model tests and numerical analyses results.

• 지질공학
• /
• 제9권1호
• /
• pp.1-15
• /
• 1999

여름철 집중강우시 발생하는 공주 송산리고분군의 누수 원인을 분석하기 위하여 인공함양시험을 실시하였다. 함양시험을 모사하는 2차원 불포화 지하수 유동 모델을 개발하고, 시험 중 측정한 관측정 수위와 함양량의 변화를 이용하여 모델변수의 보정을 수행하였으며 보정된 모델변수에 의하여 함양시험 모사를 실시하였다. 함양시험 및 모사 결과 고분군 누수현상의 주된 원인은 고분군 상부의 누수방지층에 발생한 균열을 통한 지하수의 직접적인 유입에 의한 것으로 분석되었다. 장기간 강우가 지속될 경우 고분군 북측의 원지반으로부터 불포화대를 통한 지하수의 유입 가능성이 존재하나 고분군 북측 벽체에 10% 내외의 유효포화도 증가만을 일으킬 것으로 정류상태 모사를 통하여 분석되었다. 따라서 고분군 누수 방지를 위한 대책으로는 트렌치에 의한 유도배수시설보다는 효과적인 누수방지층의 보강이 더 시급한 것으로 판단된다.

• Geomechanics and Engineering
• /
• 제13권6호
• /
• pp.1011-1025
• /
• 2017

The geological conditions surrounding the Jijiapo Tunnel of the Three Gorges Fanba Highway project in Hubei Province are very complex. In this paper, a 3-D physical model was carried out to study the evolution process of filling-type fracture water inrush and mud gush based on the conditions of the section located between 16.040 km and 16.042 km of the Jijiapo Tunnel. The 3-D physical model was conducted to clarify the effect of the self-weight of the groundwater level and tunnel excavation during water inrush and mud gush. The results of the displacement, stress and seepage pressure of fracture and surrounding rock in the physical model were analyzed. In the physical model the results of the model test show that the rock displacement suddenly jumped after sustainable growth, rock stress and rock seepage suddenly decreased after continuous growth before water inrushing. Once water inrush occured, internal displacement of filler increased successively from bottom up, stress and seepage pressure of filler droped successively from bottom up, which presented as water inrush and mud gush of filling-type fracture was a evolving process from bottom up. The numerical study was compared with the model test to demonstrate the effectiveness and accuracy of the results of the model test.

• 한국농공학회지
• /
• 제31권1호
• /
• pp.58-70
• /
• 1989

The paper compared the Bishop methed to the Fellenius method in the analysis of slope stability. Laboratory model test was carried out in the case of seepage flow considered. The results obtained from this study were summarized as follows; 1. The slice pieces of 10 were enough to analysis the slope stability. 2. The safety factor. by the Fellenius method was lower than the Bishop method by the 96 to 97% in the case of no seepage flow and by the 95 to 96% in the case of seepage flow considered. 3. Besides the parameter of soil and slope, the safety factor of slope was influenced by the height of slope. This phenomena was distinct in the height of height less than 10 meters. 4. In the case of clay, there was no difference in the safety factor of slope between Fellenius and Bishop rnethod. The safety factors of slope with the seepage flow considered were lower than those with no see-page flow. 5. The influence of cohesion on the safety factor was more significant in the Bishop method than in the Fellenius method. 6. The slope failure of model test of A and B soil samples with high permeability coefficient was taken place slightly in vicinity of toe by the concentration of stress and gradually increased 7. Under condition of same slope height, the shapper the slope, the shorter the radius and the center of critical circle appered downward and finally failure of slope occured inside the slope.

• 한국지반환경공학회 논문집
• /
• 제13권5호
• /
• pp.13-24
• /
• 2012

국토의 효율적 이용과 기간시설 수용을 위한 대단위 부지 확충 및 대규모 항만배후부지 개발이 계획 중에 있으며, 이에 따라 해안지역의 준설매립은 지속적으로 이루어지고 있다. 슬러리 상태의 초연약 상태인 준설매립 지반은 오랜 시간에 걸쳐 침강 및 자중압밀 과정을 거치게 되며 투기한 준설토를 압밀 촉진시켜 침하시킬 수 있다면 기존 처분지의 수명을 연장시킬 수 있으므로 경제적으로 유용하리라 판단된다. 재하중 없이 공기를 단축시키고 매립 물량을 증대시키기 위하여 small column test와 medium column을 보완, 개발한 medium column test를 실시하여 PBD와 침투압이 동시에 작용하였을 PBD의 효과 및 침투압의 침강 및 자중압밀 촉진 효과를 검토하였다. 연구 결과, 기존의 자중압밀 공법에 비하여 침투압과 PBD를 적용한 지반은 배수재의 배수거리 단축에 따른 투수 상승 효과와 침투압에 의한 침투 압밀의 효과가 활발히 이루어지는 것으로 나타났다. 이를 통해 매립 직후나 매립 도중에 연직드레인을 직접 타설하여 침강 및 자중압밀 과정을 단축시키면 전체 매립공사 공기를 단축시킬 수 있으며 압밀촉진에 따라 확보된 여유고 만큼 준설토 투기가 가능해져 투기 준설토량을 경제적으로 증대시킬 수 있을 것으로 기대된다.

• Geomechanics and Engineering
• /
• 제35권6호
• /
• pp.571-580
• /
• 2023

During EPB shield tunnelling, construction speed and safety are severely affected by spewing. In this study, a theoretical seepage model is established to capture of the effects of screw conveyor geometry and turbulent flow on spewing. Experimental test results are used to verify the proposed theoretical seepage model. It is found that the seepage is greatly affected by the length of screw conveyor and soil permeability. The proposed model can increase the screw conveyor length and reduce soil discharge sections simultaneously, the permeability of treated muck thus decreases by one order of magnitude. By using the proposed theoretical seepage model, the criterion of critical soil permeability used to identify spewing is proposed. When the water head applied at tunnel face reaches 40 m and 50 m, the critical permeability coefficients of treated muck should be less than 10^-5 m/s and 10^-6 m/s to avoid spewing. For a given permeability coefficient of soil, the water flow rate is overestimated if structural characteristics of screw conveyor is not considered. Consequently, the occurrence of spewing is greatly overestimated, which increases construction cost substantially.

• 한국농공학회논문집
• /
• 제47권4호
• /
• pp.53-61
• /
• 2005

A series of laboratory tests was carried out fur analyzing of seepage characteristics of two-layers embankment model which consists of gravel and earth fill layers. Gravel layers were built under the earth fill for a half and one-third width of earth fill of the model. Permeability of earth fill was ranged between $5.00\times10^{-5}\~3.00\times10^{-4}\;m/s$.. The tests were performed with hydraulic gradients(i), $0.10\~0.55$. From the test results, hydraulic head of earth fill with gravel layer was 1.6 times higher than that of earth fill without gravel layer. Seepage rate was increased up to $4\~22$ times and safety factor for piping was decreased to $13\~43\;\%$ comparing the earth fill with gravel layer to that without gravel layer. The gravel layer under the earth fill could, in general, give some serious seepage problems to seadike embankment.

• 한국안전학회지
• /
• 제12권4호
• /
• pp.134-142
• /
• 1997

The stability of an embankment Impounding a water reservoir is highly depend upon the location of seepage line with the embankment. To evaluate the accurate safety factor of an embankment, it is important to illustrate the seepage phenomenon. Of particular interest is the stability following a rapid change (drawdown) of reservoir level Seepage forces in embankments are easily determined if frictional forces are expressed in relation to hydraulic gradient Ⅰ. If a piezometer is inserted into a body of embankment, the level to which free water rises is a measure of the energy at that point. From model test result, it is possible to calculate safety factors of earth embankment. To assure the validity of this research, tests were conducted with numerical experimental models. And the experiment models were constructed with slopes of 1:1.0, 1:1.5, 1:2.0, 1:2.5. Analysis of experimental results, seepage force was analyzed according to downstream time, internal friction angle and cohesion, respectively.