• Journal of Forest and Environmental Science
• /
• v.39 no.2
• /
• pp.96-104
• /
• 2023

The successful restoration program requires a comprehensive understanding of variables influencing seedling efficiency. Below-ground is hypothesized to have a major impact on seedling performance of species when planted in agriculture, and degraded areas with different types of mulching. This study investigated on Sg. Terla Forest Reserve in Cameron Highlands Pahang, Malaysia. In this study randomized complete block design (RCBD) was used. The excavation method was applied to study the root system development, above, and below ground biomass distributions under different types of mulching: coconut mulching (CM), oil palm mulching (OM), plastic mulching (PM) and control (CK). The root diameter, main root length, lateral root length, root coiling, and root direction toward to sun were recorded. The results in this study indicate that mulching had significant effect on root diameter, main root length, and root distributions among treatments while for lateral root length, root: shoot ratio, dry biomass distributions, and above and below ground biomass did not showed significant effect among treatments. The highest values for root diameter, lateral root length, main root length, root distributions, dry biomass distributions and above and below ground biomass were showed in CM treatments. However 75% of root coiling was observed in seedlings between treatments.

• Journal of Biosystems Engineering
• /
• v.5 no.1
• /
• pp.58-65
• /
• 1980

Sinkage differences between the wheels of a transplanter which are caused by the different hard pan of fields and land preparation affect the field performance of a rice transplanter. In this experiment the relationships between the sinkage differences of the wheels of a transplanter and the planting distance, planting angle, planting depth and deviation from a straight transplanting line were investigated. The objective of this experiment was to obtain some basic informations for the effective use of the rice transplanter . The results of this experiment are as follows. 1. Transplanting distance became shorter as the sinkage differences increased. This effect was greater on the side of the transplanter with a shallower sinkage. 2. The depth of transplanting increased as the differences in the depth of sinkage increase for the side with the deeper sinkage. An opposite trend was observed for the side with shallower sinkage. 3. The angle of transplanted seedlings from the vertical portion increased slightly as the sinkage differences increased. The variation in results were greater from the side of the transplanter with deeper sinkage than with shallower sinkage. 5. The best postures of planted seedling were found when the water depth was 3 cm for the side of transplanter with deeper sinkage and 4 cm for the shallower sinkage side. The relationships between the postures of planted seedling and water depth. , or $y=67.62 + 10.69x-1.76x^2$ for the side of transplanter with deeper sinkage and $y=66.64+11.62x-1.50x^2$ for the side with shallower sinkage, were found from this experiment.

• Korean Journal of Medicinal Crop Science
• /
• v.14 no.3
• /
• pp.173-177
• /
• 2006

Terminal buds and young leaves of Kalopanax pictus are in a great demand as a edible vegetable. Its bark of stems and roots have been used as the resources of folk medicine in Korea. Recently, attempts to cultivate the plant have being tried in farms and mountain villages. This study was conducted to determine effect of inorganic elements on seedlings growth of K. pictus. Levels of inorganic elements in the leaves were variable based on macro and micro inorganic elements. Among the inorganic elements in the leaves of K. pictus seedlings, level of N was high, while other ions were low in the order of K, Ca, P, Mg, Mn, Fe and Zn. A highly significant correlations between the seedling growth and the level of N, P, K, and Na in the leaves, while a low positive significant correlations between the growth and the level of either Mg or Mn and no significant correlations between the growth and the level of Ca, Fe, Cu, and Zn. The most affecting inorganic ion on the seedling growth was N, and followed by the order of K, P, Mg, Mn and Na.

• Journal of agriculture & life science
• /
• v.51 no.1
• /
• pp.187-192
• /
• 2017

In various crops, seedlings are preferred to seeds for faster and more effective growth, so transplanters are used for them. This 2-row transplanter was developed to promote the mechanization of vegetable transplanting work which depends on human power. and it can automatically supply seedling tray and transport picked up seedling to the planting hopper. Also, we judged performance of transplanter with comparing seedling missing plant ration according to two types of pick-up method. Result of experiment, in finger-type picking up of 265 seedlings, missing plant ratio was 13.7% with 17 failures of pick-up and 15 collapse of bed soil. and In fork-type picking up of 200 seedlings, failure of pick-up was not appeared and missing plant ratio was low as 4% with 6 dropped during transfer. Therefore for 2-row automatic transplanter, fork-type pick-up device was found to be compatible.

• Korean Journal of Agricultural Science
• /
• v.43 no.1
• /
• pp.144-151
• /
• 2016

With an aging population in rural areas, farm owners in South Korea are also aging. In particular, this phenomenon leads to the lack of human resources in rural areas and agriculture, worsening the deterioration of the rural economy. This study aimed, firstly, to analyze the criticality of the lack of human resources and high production cost issues for farmers, before using the farm as cooperative nursery of rice seedlings. Secondly, the study analyzed farmer satisfaction after using the farm cooperative. Analysis results are as follows. The motives of the research subjects for using the co-nursery were the aging of the farming population, the expected reduction of production costs, and farmers' failure in raising seedlings. Importance-performance analysis measured the importance for the farms for cooperative raising of rice seedling at 3.49 and the performance for the farms at 3.41, with a difference of 0.07 between them. The four importance-performance matrix areas, used were as follows: concentrated efforts required (Quadrant I: concentrate here), continuous maintenance (Quadrant II: keep up the good work), gradual improvement (Quadrant III: low priority), and avoiding excessive efforts (Quadrant IV: possible overkill). Based on the results, it was concluded that improvements and efforts would be necessary for each of these areas. And, there is a need to improve services through the initiation of farmer use of this rice co-nursery.

• Journal of Biosystems Engineering
• /
• v.39 no.2
• /
• pp.69-75
• /
• 2014

Purpose: This paper is aimed at analyzing the heating performance of the vertical closed loop type Geothermal Heat Pump System (GHPS) distributing the farm site and providing basic data of the GHPS. Method: Seedling greenhouse heating was made from October 2012 to May 2013. The seedling greenhouse was divided into 4 sectors (A, B, C and D zone, total $3,300m^2$) with different temperatures. It was heated from 5PM to 8AM, and during the night the greenhouse was covered by non-woven fabric thermal curtains along the upper 2m of the greenhouse for temperature maintenance. In order to analyze the heating performance of the GHPS, power consumption and operating time of the GHPS, inlet and outlet water temperature of the condenser, temperatures of each zone of the greenhouse, and ambient temperature were measured. Results: When operating only one heat pump unit, heat generated in the condenser decreased as the experiment progressed and power consumption increased correspondingly. However, the heating coefficient of performance decreased from 3.3 to 2.0 rapidly. Also, when operating two heat pump units, heat generated in the condenser decreased and power consumption increased. Heating coefficient of performance decreased from 4.5 to 3.7 rapidly. When the set temperature of the greenhouse was $13.7{\sim}20.1^{\circ}C$ and minimum ambient temperature was $-20.8{\sim}4.8^{\circ}C$, the annually accumulated heat and power consumption were 520,623 kW, 142,304 kW, respectively. Conclusion: When the set temperature of the greenhouse was $13.7{\sim}20.1^{\circ}C$ and the minimum ambient temperature was $20.8{\sim}4.8^{\circ}C$, the annually accumulated heat and power consumption were 520,623 kW, 142,304 kW, respectively. When operating only one heat pump unit, the heating COP was 2.0~3.3, and when operating 2 heat pump units, it was 3.7~4.5. If several heat pumps are installed in one GHPS, it is suggested that all heat pumps be operated except in special cases. Because the scale of the water pumps are set to the scale of when all heat pump units are operating, if even one unit is not operating, the power consumption will increase. That becomes the cause of COP decrease.

• Journal of Biosystems Engineering
• /
• v.41 no.1
• /
• pp.21-33
• /
• 2016

Purpose: In order to ensure that vegetable seedlings (with a soil block around their roots) are planted in an upright orientation after metering in a vegetable transplanter, they need to be dropped freely from a certain height. The walk-behind hand-tractor-powered machines do not have sufficient space to drop the seedlings from that height. In the present work, a hopper-type planting device was developed for the walk-behind hand-tractor-powered vegetable transplanter to ensure that the soil block seedlings are planted in an upright orientation. Methods: Various dimensionless terms were developed based on the dimensional analysis approach, and their effect on the planting of soil block seedlings in an upright orientation (planting efficiency) was studied. The optimum design dimensions of the hopper-type planting device were identified by the Taguchi method of optimization. Results: The ratio of the height of free fall to the sliding distance of the seedling on the surface of the hopper had the highest influence on planting efficiency. The planting efficiency was highest for plants with a height $15{\pm}2cm$. The plant handling Froude number, in interaction with the design of the hopper-type planting device, also significantly affected the planting efficiency. Of the hopper design factors, the length of the slide of the seedlings on the surface of the hopper was most important, and induced sufficient velocity and rotation to cause the seedling to fall in an upright orientation. An evaluation of the performance of the planting device under actual field conditions revealed that the planting efficiency of the developed planting device was more than 97.5%. Conclusions: As the seedlings were fed to the metering device manually, an increase in planting rate increased missed plantings. The planting device can be adopted for any vegetable transplanter in which the seedlings are allowed to drop freely from the metering device.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.189-189
• /
• 2017

Salinity is one of the major abiotic stresses that severely affect crop production throughout the world; especially rice plant which is generally categorized as a typical glycophyte as it cannot grow in the presence of salinity. Phenotypic resistance of salinity is expressed as the ability to survive and grow in a salinity condition. Salinity resistance has, at least implicitly, been treated as a single trait. Physiological studies of rice suggest that a range of characteristics (such as low shoot sodium concentration, compartmentation of salt in older rather than younger leaves, high potassium concentration, high $K^+/Na^+$ ratio, high biomass and plant vigour) would increase the ability of the plant to cope with salinity. Criteria for evaluating and screening salinity tolerance in crop plants vary depending on the level and duration of salt stress and the plant developmental stage. Plant growth responses to salinity vary with plant life cycle; critical stages sensitive to salinity are germination, seedling establishment and flowering. We have established a standard protocol to evaluate large rice germplasms for overall performance based on specific physiological traits for salt tolerance at seedling stage. This protocol will help in identifying germplasms which can perform better in the presence of different salinity treatments based on single trait and also combination of different physiological traits. The salt tolerant germplasm can be taken forward into developing better varieties by conventional breeding and exploring genes for salt tolerance.

• Journal of Plant Biotechnology
• /
• v.47 no.3
• /
• pp.235-241
• /
• 2020

This is the first study to establish a complete protocol for micropropagation of Rehmannia glutinosa from root segments. The study involved investigating the effect of plant growth regulators on in vitro shoot regeneration and rooting and identifying substrates supporting survival and growth performance of ex vitro seedlings. A Murashige and Skoog (MS) medium containing 30 g/L sucrose for shoot induction and 0.2 mg/L indole-3-acetic acid (IAA), 1 mg/L 6-benzylaminopurine (BAP), and 1 g/L polyvinylpyrrolidone (PVP) for shoot multiplication resulted in the highest number of shoots per explant and shoot height. Applying a medium containing 0.5 mg/L IAA and 1 g/L PVP yielded optimal rooting of the shoots grown in vitro. Compost enriched with microbial inoculants and perlite enhanced seedling growth better than that with organic biofertilizer-free substrates (soil and sand). We recommend the continuous production of micropropagated R. glutinosa seedlings from root segments under the aforementioned conditions as a possible propagation technique for crops of this species.

• Horticultural Science & Technology
• /
• v.18 no.6
• /
• pp.787-791
• /
• 2000

Lettuce seedlings used in this investigation of planting distance and labor-saving efficiency were first grown in 100-hole paper trays for 30 days. Seedling height for transplanting ranged from 3 cm to 6 cm and plants had 3 to 5 leaves. The beds prepared for transplanting were of the arched type and were 35-40 cm in width, 15-20 cm in bed height, and between-bed furrow width was 20 30 cm. Typical seedling planting depth with the transplanter was 4-5 cm, although depth was quite variable because of the irregularities of the ground. Total transplanting time with the transplanter varied from 2.6 to 2.7 hours per 10a, while it took 38.1 hours per 10a with conventional planting. It was critical that the condition of both the seedlings and the bed be adjusted to the transplanter before planting. Considering yield and inter-plant distance, optimal transplanter performance resulted with $60{\times}20cm$ or $60{\times}25cm$spacing, and the labor-saving efficiency using the transplanter was improved by over 93% of that of conventional planting by hand.