• Korean Journal of Plant Resources
• /
• v.19 no.4
• /
• pp.480-487
• /
• 2006

This study was conducted to improve the germination percent and germination speed by seed priming using polyethylene glycol (PEG) 8,000 solution on Acer mono seed because it has low and irregular germination characteristics. Seed priming was carried out under 0, -0.25, -0.5, -1.0 and -2.0 MPa of water potential at $20^{\circ}C$ for 3 days. Primed seeds showed higher percent germination, germination speed, mean germination time (MGT) and germination performance index (GPI) than unprimed seeds. Especially, primed seed with -2.0 MPa of water potential had the highest germination properties. And primed seeds had a lower dormancy than the unprimed seeds. Relative growth rate and T/R ratio of seedling from primed seeds were measured to survey the effect of seed priming on the seedling vigor as well as seed germination. The seedlings from primed seeds at -2.0 MPa of water potential showed the highest relative growth rates of height and root collar diameter, however, the lowest value in T/R ratio. This study suggested that seeds priming at -2.0 MPa of water potential under $20^{\circ}C$ for 3 days enhanced not only the percent germination, germination speed, MGT and GPI but also the vigor and growth of seedlings in Acer mono.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.14 no.2
• /
• pp.45-52
• /
• 2012

Enrichment planting is commonly used for increasing the density of tree species in secondary forests and one of forest rehabilitation programs in Lao PDR. This study aimed to determine the performance of five native species in enrichment planting using different canopy opening treatments, and to examine the suitable species and silviculture techniques applicable to a logged-over forest in Lao PDR. Results of the study showed that only crown height had significant difference among species and planting treatments. The survival rate and crown diameter were significantly different by species, but not by planting treatments. However, root collar diameter (RCD) and height of seedlings showed significant differences among planting treatments. Among the study species, Hopea odorata and Dalbergia cochinchinensis showed significantly higher survival rate and height growth, indicating their suitability in enrichment planting for rehabilitation of forest in Lao PDR. The results also suggested that 2 m width line planting stimulated RCD growth, but wider line planting, such as gap planting, promoted height growth of seedlings.

• Journal of Bio-Environment Control
• /
• v.26 no.3
• /
• pp.158-166
• /
• 2017

The object of this study was to improve tomato seedling quality in low temperature(below 7, $10^{\circ}C$ during night time or daily mean air temperature was $18^{\circ}C$) by application of silicate fertilizer. Six different silicate fertilizer concentrations (8, 16, 32, 64, 128, and 256mM) or water as the control were applied to tomato seedlings twice a week for 20 days. Positive effects were observed in the growth parameters of the seedlings treated with 16 and 32mM silicate fertilizer; the most effective concentration of silicate at which seedlings showed the best performance was 16mM. However, a high concentration of silicate (256mM) caused negative effects on the growth. The transpiration rate decreased alongside with the increase of silicate concentration up to 32mM, possibly due to the increased stomatal diffusive resistance. Silicate stimulated the growth and development of tomato seedlings, resulting in increased growth parameters and root morphology. However, no significant differences were observed among treatment numbers of soil-drenching wuth the silicate (6, 10, or 20 times with 16mM) for 20 days, suggesting that silicate treatment with 6 times may be sufficient to induce the silicate effects. The application of 16mM of silicate fertilizer reduced relative ion leakage and chilling injury during low temperature storage. In addition, the seedlings treated with silicate fertilizer recovered faster than those without silicate treatment after low temperature storage.

• Journal of Forest and Environmental Science
• /
• v.33 no.1
• /
• pp.22-32
• /
• 2017

An experiment was set to assess the effect of mixed plantings on initial growth and biomass yield of two common plantation tree species of Bangladesh namely Acacia auriculiformis (A) and Gmelina arborea (G). Study was carried out in the nursery bed of the Seed Research Laboratory and Nursery of Institute of Forestry and Environmental Sciences, Chittagong University (IFESCU), Bangladesh during February to November, 2015. The treatments consisted of two pure planting plots (100% A and 100% G) and five mixed planting plots (50%A: 50%G, 35%A: 65%G, 25%A: 75%G, 65%A: 35%G and 75%A: 25%G) of these two species. In nursery, seedlings were raised in a randomized blocks with four replicates of seven treatment plots. Periodic increments on height (cm), collar diameter (cm) and leaf/phyllode number of the seedlings was taken in every month and continued up to 10 months. The growth and biomass yield of seedlings were measured 10 months after the first seed was emerged. The effects of mixed plantation on growth and biomass were compared to that of seedlings grown in pure plantation. At the age of 10 months it was found that G. arborea seedlings were significantly tallest (240.13 cm) when planted with A. auriculiformis in a proportion of 25%A: 75%G, whereas A. auriculiformis were tallest in the pure 100% A plot, with an average mean height of 135.36 cm. Maximum collar diameter (1.38 cm) was recorded for G. arborea in the mixed plots 75%A: 25%G. Fresh and dry weight of shoots and roots of the seedlings were found significantly (p<0.05) highest in 50%A: 50%G plot for G. arborea. G. arborea also showed highest quality index when mixed with A. auriculiformis in a proportion of 50:50, with an average value of 8.96. The results revealed a positive correlation between seedling growth and various planting patterns.

• Korean Journal of Medicinal Crop Science
• /
• v.27 no.6
• /
• pp.390-396
• /
• 2019

Background: Usually ginseng seeds are sown during autumn and spring. Sowing in spring often results in poorer seedling establishment than in autumn. One of the reasons for poor germination could be cold-treatment condition for breakage of physiological dormancy during winter. Here we tested the effects of storage temperature used during cold treatment on germination. Methods and Results: Germination properties were observed after dehiscent seeds were stored as wet and dry at 2℃, -2℃, -3.5℃ and alternating temperature (AT). Seed dryness and storage temperature affected germination properties (p < 0.01). Wet and AT condition germinated highest, and wet and -3.5℃ condition germinated lowest, which was 91.2% and 1.4% respectively. Mean germination time (MGT) of the wet and AT condition was faster than other treatments at 2.4 days, and the dry and -2℃ condition was the longest. Germination performance index (GPI) was highest for wet and AT condition (37.7%) and the lowest for wet and -3.5℃ condition (0.5%). The growth of above-ground and below-ground were the best for wet and 2℃ condition, and wet seeds showed better growth than dry seeds (p < 0.01). Conclusions: For cold treatment, ginseng seeds may not be stored below -2℃ for successful germination during spring sowing.

• Mycobiology
• /
• v.45 no.1
• /
• pp.44-47
• /
• 2017

Ginseng damping-off, caused by the fungal pathogens Rhizoctonia solani and Pythium sp., is a critical disease in ginseng seedling. In a continuing effort to find microorganisms with the potential of acting as a biocontrol agent against Rhizoctonia damping-off, we found that a Streptomyces sp. A501 showed significant antifungal activity against Rhizoctonia solani. In field experiment to test the efficacy of Streptomyces sp. A501 in controlling ginseng damping-off, the incidence of damping-off disease was meaningfully reduced when ginseng seeds were soaked in the culture broth of Streptomyces sp. A501 before sowing. To perform characterization of the antifungal compound, we isolated it from the culture broth of strain A501 through Diaion HP-20 and silica gel column chromatographies and preparative high-performance liquid chromatography. The structure of the antifungal compound was assigned as fungichromin by spectroscopic methods, mainly nuclear magnetic resonance and electrospray ionization-mass analysis.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.213-213
• /
• 2017

High quality seed of proso millet that has high germination percentage, germination speed, and uniformity demanded to increases rates of mechanization in cereal crop cultivation. In order to improve germination characteristics, proso millet seeds were treated with red light, ultrasonication and liquid smoke (LS) solution that generated from hickory wood. All treatments were performed in seed priming solution with 100mM $NH_4NO_3$ at $15^{\circ}C$ for 24hrs under aeration condition. Seeds were exposed under light intensity of 2000 lux for 15m, 30m, 60m, and 120m in priming solution. Ultrasonic treatment was performed at 60%, 80%, and 100% intensity of 21.6 KHz for 5m, 10m, and 20m in priming solution. For LS treatment seed were soaked in 0%, 0.5%, 1.0%, 5.0% and 10.0% of diluted solution with $dH_2O$ or 100mM $NH_4NO_3$ solution. The effect of seed treatment was evaluated with germination percentage (GP), mean germination time (MGT), germination index (GI), germination rate (GR), Germination uniformity (GU) and heath seed percentage (HS). Our results demonstrate that red light (15min) or ultrasonication (21.6kHz, 5min) treatment improved MGT, GI, GR, and GU comparing to untreated control. Importantly, we show that LS treatments have significant effect on the health seedling and germination characteristics. Proso millet seeds that treated with 5% LS solution for 24hrs improves HS up to 97% that similar results obtained in 100mM $NH_4NO_3$ priming for 24hrs. The combined treatment with LS solution and 100mM $NH_4NO_3$ priming were not effective in all treatments. Our results demonstrate that treating seeds with LS or 100mM $NH_4NO_3$ priming or ultrasonication improves germination characteristics. The methods described here will help advance research using this species by increasing the germination performance at which successive seed pellet process.

• Journal of Biosystems Engineering
• /
• v.25 no.6
• /
• pp.463-470
• /
• 2000

For maximum seeding efficiency of a nozzle type seeder, the performance of the nozzle should be considered sufficiently. This study was carried out to investigate the optimum operating conditions of a seeder attached the vacuum nozzle which was modified syringe needle acting on the plug seedling tray and the seed plate. Such operating factors as the hole diameter of the nozzle (d), the distance from the nozzle tip to the bottom plate of seed hopper(D) the absorbing air pressure of the nozzle tip(P) the bounding height of seed from the vibrated bottom plate of seed hopper and the seeding speed were selected based on the weight of a grain of seed(W). The treated materials were pepper seed as the flat type, cucumber seed as the oval type and radish seed as the spherical type. The optimum operating conditions of the experimental seeder were revealed as follows: 1. The height of the seed bounding from the bottom plate of seed hopper and the distance from nozzle tip to bounded seed were 5 mm and 0.5 mm at all seeds. The hole diameter of the nozzle and the absorbing pressure for pepper seed, cucumber seed and radish seed was 0.45 mm, 0.65 mm. 0.65mm and 39.2 kPa, 88.3 kPa, 58.8 kPa, respectively. 2. The absorbing pressure P was represented as P=η.4W/$\pi$d$^2$ where η was 100. The seeding speed using a 128 cell tray was 2.4 cm/s which was same transfer as 2.5 trays per minute. 3. The maximum seeding rate in case of the pepper seed was 97% the cucumber seed was 95% and the radish seed was 100% under the optimum operating conditions of the seeder.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.6
• /
• pp.87-96
• /
• 2010

This study was conducted to select environmentally-friendly and low-cost mulching material that could replace soil molding which can be used to restore vegetation in an abandoned coal mine area. To this end, we established 20 experimental plots (4m ${\times}$ 10m in size) on the steep, south west-facing slope of the abandoned coal mine area in Hwangji-Dong, Taebaek City, Gangwon Province in April 2006. We planted two-year-old 1,600 seedlings (at intervals of 0.6m ${\times}$ 0.8m) of drought-resistant tree species including Betula schmidtii, Betula platyphylla var. japonica, Amorpha fruticosa, and Quercus mongolica in the plots. After planting seedlings, mulching was applied by using five different kinds of material such as HWAP (Teracotem), peat moss, straw mats, wood chips, and control (no-mulching) and the effects of different mulching material on the survival rate and growth performance were compared. Three years after planting, the survival rate was the highest in wood chip mulching, followed by straw-mat, peat moss, HWAP, and control. The survival rate was the highest in Quercus mongolica, followed by Betula schmidtii, Betula platyphylla var. japonica, and Amorpha fruticosa. Meanwhile the height growth was the best in Betula platyphylla var. japonica, followed by Betula schmidtii, Quercus mongolica, and Amorpha fruticosa. The height growth of seedlings was the best in HWAP mulching, followed by peat moss, woody chips, straw mat, and control. From an economic point of view, wood chips are considered to be the best mulching material. The results showed that mulching without soil molding and/or mixing applications would be effective for restoring vegetation in an abandoned coal mine areas.

• The Plant Pathology Journal
• /
• v.32 no.5
• /
• pp.396-406
• /
• 2016

Continuous supplementation of mineral nutrients and salicylic acid (SA) as foliar application could improve efficacy in controlling basal stem rot (BSR) disease in oil palm seedling. It is revealed from the results that the highest disease severity index (58.3%) was recorded in T8 treatments at 9 months after inoculation. The best disease control was achieved by T7 treatments (calcium/copper/SA [Ca/Cu/SA]) (5.0%) followed by T1 (5.5%), T5 (5.8%), T3 (8.3%), T6 (8.3%), T4 (13.3%), and T2 (15.8%) treatments. Continuous supplementation of Ca/Cu/SA was found to be the most effective in controlling the disease and the high performance liquid chromatography results showed the detection of ergosterol at very low concentration in the treated samples. Moreover, the transmission electron microscopy analysis results clearly indicated that T7 treatment was also enhancing lignification, which was responsible for the thickness of the secondary cell walls and middle lamella compared to untreated samples. It was therefore, concluded that continuous supplementation of minerals nutrients and SA could effectively suppress disease severity by reducing ergosterol activity and also improve the process of lignification in the treated plants. Furthermore, this treatment also managed to delay the onset of BSR symptoms and promote the growth of the seedlings and eventually suppress the BSR disease.