• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.33-33
• /
• 2007

SoP-L 공정은 유전율이 상이한 재료를 이용하여 PCB 공정이 가능하고 다른 packaging 방법에 비해 공정 시간과 비용이 절약되는 잠정이 있다. 본 연구에서는 SoP-L 기술을 이용하여 Si 기판의 함몰에 판한 공정의 안정도와 함몰 시 제작된 때턴의 특성의 변화에 대해 관찰 하였다. Si 기판의 함몰에 Active device를 이용하여 특성의 변화를 살펴보고 공정의 안정도를 확립하려 했지만 Active device는 측정 시 bias의 확보와 특성의 민감한 변화로 인해 비교적 측정이 용이하고 공정의 test 지표를 삼기 위해 passive device 를 구현하여 함몰해 보았다. Passive device 의 제작 과정은 Si 기판 위에 spin coating을 통해 PI(Poly Imide)를 10um로 적층한 후에 Cr과 Au를 seed layer로 증착을 하였다. 그리고 photo lithography 공정을 통하여 photo resister patterning 후에 전해 Cu 도금을 거쳐 CPW 구조로 $50{\Omega}$ line 과 inductor를 형성하였다. 제작 된 passive device의 함몰 전 특성 추출 data와 SoP-L공정을 통한 함몰 후 추출 data 비교를 통해 특성의 변화와 공정의 안정도를 확립하였다. 차후 안정된 SoP-L 공정을 이용하여 Active device를 함몰 한다면 특성의 변화 없이 size 룰 줄이는 효과와 외부 자극에 신뢰도가 강한 기판이 제작 될 것으로 예상된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.270.1-270.1
• /
• 2013

Zinc oxide (ZnO) is one of the most powerful materials for purifying organic pollutants using photocatalytic activity. In this study, we have introduced a novel method to design highly photoreactive flexible 3 dimensional (3D) ZnO nanocomposite [F-ZnO-m (m: reaction time, min)] by electrospinning and simple-step ZnO growth processing (one-step ZnO seed coating/growth processing). Significantly, the F-ZnO-m could be a new platform (or candidate) as a photocatalytic technology for both morphology control and largearea production. The highest photocatalytic degradation rate ([k]) was observed for F-ZnO-m at 2.552 h-1, which was 8.1 times higher than that of ZnO nanoparticles (NPs; [k] = 0.316 h-1). The enhanced photocatalytic activity of F-ZnO-m may be attributed to factors such as large surface area. The F-ZnO-m is highly recyclable and retained 98.6% of the initial decolorization rate after fifteen cycles. Interestingly, the F-ZnO-m samples show very strong antibacterial properties against both Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus) after exposure to UV-light for 30 min. The antibacterial properties of F-ZnO-m samples are more effective than those of ZnO NPs. More than 96.6% of the E. coli is sterilized after ten cycles. These results indicate that F-ZnO-m samples might have utility in several promising applications such as highly efficient water/air treatment and inactivation of pathogenic microorganisms.

• 한국재료학회지
• /
• 제17권10호
• /
• pp.509-515
• /
• 2007

In order to fabricate adhesiveless 2-layer flexible copper clad laminate (FCCL) used for COF (chip on film) with high peel strength, polyimide (PI; Kapton-EN, $38\;{\mu}m$) surface was modified by reactive $O_2^+$ and $N_2O^+$ ion beam irradiation. 300 mm-long linear electron-Hall drift ion source was used for ion irradiation with ion current density (J) higher than $0.5\;mA/cm^2$ and energy lower than 200 eV. By vacuum web coating process, PI surface was modified by linear ion source and then 10-20 nm thick Ni-Cr and 200 nm thick Cu film were in-situ sputtered as a tie layer and seed layer, respectively. Above this sputtered layer, another $8-9{\mu}m$ thick Cu layer was grown by electroplating and subsequently acid and base resistance and thermal stability were tested for examining the change of peel strength. Peel strength for the FCCLs treated by both $O_2^+$ and $N_2O^+$ ion irradiation showed similar magnitudes and increased as the thickness of tie layer increased. FCCL with Cu (200 nm)/Ni-Cr (20 nm)/PI structure irradiated with $N_2O^+$ at $1{\times}10^{16}/cm^2$ ion fluence was proved to have a strong peel strength of 0.73 kgf/cm for as-received and 0.34 kgf/cm after thermal test.

• The Plant Pathology Journal
• /
• 제37권6호
• /
• pp.555-565
• /
• 2021

Bacteriophages infecting Acidovorax citrulli, the causal agent of bacterial fruit blotch, have been proven to be effective for the prevention and control of this disease. However, the occurrence of bacteriophage-resistant bacteria is one of hurdles in phage biocontrol and the understanding of phage resistance in this bacterium is an essential step. In this study, we aim to investigate possible phage resistance of A. citrulli and relationship between phage resistance and pathogenicity, and to isolate and characterize the genes involved in these phenomena. A phage-resistant and less-virulent mutant named as AC-17-G1 was isolated among 3,264 A. citrulli Tn5 mutants through serial spot assays and plaque assays followed by pathogenicity test using seed coating method. The mutant has the integrated Tn5 in the middle of a cupin protein gene. This mutant recovered its pathogenicity and phage sensitivity by complementation with corresponding wild-type gene. Site-directed mutation of this gene from wild-type by CRISPR/Cas9 system resulted in the loss of pathogenicity and acquisition of phage resistance. The growth of AC-17-G1 in King's B medium was much less than the wild-type, but the growth turned into normal in the medium supplemented with D-mannose 6-phosphate or D-fructose 6-phosphate indicating the cupin protein functions as a phosphomannos isomerase. Sodium dodecyl sulfa analysis of lipopolysaccharide (LPS) extracted from the mutant was smaller than that from wild-type. All these data suggest that the cupin protein is a phosphomannos isomerase involved in LPS synthesis, and LPS is an important determinant of pathogenicity and phage susceptibility of A. citrulli.

• 한국잡초학회지
• /
• 제12권3호
• /
• pp.200-222
• /
• 1992

The results of recent researches for improvement of seedling stand in direct seeded rice on the dry paddy in Korea were summarized as the following ; a variety to be cultivated should be chosen the characteristics of high percentage germination under low temperature, shorter period of shoot emergence, and better growth of the mesocotyl and shoots. Meanwhile, there was 40% increase in seedling stand at the treatment of removal of the seed awn under using the drill seeder. After seeding the rice seed covered with soil of 3cm depth was better seedling emergence and also there was the hightest seedling emergence at the 70% of moisture content of the soil. In addition, the application of the Release containing GA 10% enabled to increase the seedling stand and furthermore it was effective under deep seeding depth. The optimum seeding date should be seeded around May 10 when mean air temperature is above 12-13$^{\circ}C$ so that may establish more less 70% in seedling stand. Based on an appropriate seedling stand of 150/$m^2$, the optimum seeding rate was 5kg/10a. It was the best in seeding method using drill seeder and the most desirable recommended seeding method was the drill seeder in terms of seedling stand. In order to improve seedling stand water management was more effective in canal irrigation and in drainage at 6hr after irrigation following by the seeding process. On the other hand, for the increase of seedling stand under flooded condition a variety might have characters being better germination at low concentration of dissolved oxygen and vertically deeper growing of the crown root. Also, seedling stand was able to increase with the seed coating of $CaO_2$in the flooded soil. It was possible to be seeded on the early part of May being mean air temperature of avove 10$^{\circ}C$ and the optimum seeding rate was 5kg/10a. For an effective water management water would be flooded up to 3cm depth for 2-3 weeks after seeding. The rice plant grown under the direct seeded cultivation might be not so much strong in lodging resistance compared to that grown under the transplanting and moreover direct seeded rice cultivation under flooded condition would be more weak growth of the rice plant than that on dry paddy. Meanwhile, the lodging would be affected by the seeding rate, the soil depth after seeding. and seeding method even in the same variety. In particular, roots in the lodging pattern of direct seeded rice cultivation under flooded condition were largely distributed on the soil surface so that resulted easily in the lodging. In general, the lodging resistance would be greater as seeding rate and amount of N fertilizer application are lower and soil depth after seeding is higher. Among the introduction of different seeding method the high ridged drill seeding method on dry paddy soil resulted in the lowest in the lodging index and also it was lower in the drill seeding method than in the scattering seeding method under flooded condition. In case of more than 150 seedlings per $m^2$ there was a severe lodging due to high lodging index at the 3rd and 4th internodes. The effective lodging prevention was able to at the treatment of the Inabenfide at 45 days before heading and the Uniconazol at 15 days before heading which caused the shortage by 10-15cm in culm length. Also, fertilizer management using split application of nitrogen would be contributed the reduction of lodging at the rate of 20-30-20-20-10%(basal-5th leaf stage-7th leaf stage-panicle initiation stage-heading stage) on the dry paddy soil.

• 폴리머
• /
• 제32권4호
• /
• pp.322-327
• /
• 2008

본 연구에서 제조한 다중층 펠렛은 수팽윤성 고분자를 포함하는 시드층, 모델 약물인 독사조신을 함유한 약물층, 약물의 방출을 제어하는 다공성막 그리고 지질층으로 구성되어 있으며, 유동층 코팅 방법을 이용하여 제조하였다. 펠렛을 구성하는 각각의 층에 다양한 특성을 가지는 고분자들의 블렌딩에 따른 독사조신의 약물방출 거동을 확인하기 위하여 히드록시프로필메틸셀룰로오스(HPMC)와 에틸셀룰로오스(EC)의 양을 달리하여 약물층을 제조하였고, 셀룰로오스 아세테이트(CA)와 $Eudragit^{(R)}$ RS의 비율을 달리하여 다공성막을 제조하였다. 그리고 지질층에 의한 방출 거동을 확인하고자 피마자유의 두께를 다르게 하여 펠렛을 제조한 결과, 대략 $1500{\mu}m$의 균일한 크기를 가지는 구형의 펠렛을 얻었다. 수용액에서 용출시험을 통하여 시간에 따른 약물방출량을 확인한 결과, 약물층에 첨가된 고분자 중, EC의 비율과 다공성막에서 CA의 비율이 증가하고, 피마자유층의 두께가 두꺼워지면 약물의 방출이 감소함을 알 수 있었다. 그리고 약물방출을 제어하는데 가장 큰 역할을 하는 다공성막의 다공형성거동 역시 SEM을 통해 확인하였다.

• 폴리머
• /
• 제31권4호
• /
• pp.329-334
• /
• 2007

경구를 통한 약물전달시스템 중 하나인 삼투압을 이용한 삼투정 펠렛의 제조는 타블렛 제형이 갖는 제조 공정상의 복잡함과, 생산비용 등의 문제들을 줄이고자 시도되었다. 삼투정 펠렛은 수팽윤성 시드층과 약물층 그리고 반투막층으로 구성되었으며, 이중에서 반투막층은 약물의 방출을 조절하는 중요한 역할을 한다. 이번 연구에서는 반투막층으로 사용되는 Eudragit RL과 RS의 비에 대한 영향과 코팅두께에 따른 약물방출 거동을 확인하고자 하였다. 모델약물인 니페디핀을 포함한 삼투정 펠렛의 제조는 유동층 코팅기를 이용하여 제조하였으며, 비교적 높은 코팅 수율과 $1300{\sim}1500\;{\mu}m$ 크기의 펠렛을 얻었다. 얻어진 펠렛의 Eudragit RL과 RS의 비에 따른 약물방출 거동을 보면, Eudragit RL의 비가 증가할수록 약물의 방출은 증가함을 확인하였다. 이는 Eudragit RL이 RS보다 친수성 4차 암모늄 그룹을 더 많이 갖기 때문이다. 또한 반투막의 코팅 두께가 증가할수록 약물의 방출이 지연됨을 확인하였다. 반투막과 모델약물의 pH의 변화에 대한 약물방출의 영향을 알아보기 위하여 pH 1.2, 6.5, 6.8, 7.2의 서로 다른 pH에서 실험을 실시하였으며, pH의 변화에 관계없이 약물방출이 안정적으로 일어남을 확인하였다. 이번 실험을 통하여 삼투정 펠렛의 약물방출은 펠렛의 반투막 조성과 코팅두께에 의존함을 확인하였다.

• 한국작물학회지
• /
• 제53권3호
• /
• pp.292-296
• /
• 2008

Clay-coated rice seeds (clay-coated seeds A and B) were directly sown on dry paddy and their growth and yield were compared with the normal drill-sown seeds on dry flat paddy. In clay-coated seeds, germination was 1 day earlier and the emergence rate was higher up to 5% than that of normal drill-sown seeds. But the apparent number of seedling stand per $m^2$ was lower than that of normal drill-sown seeds, which is due to the smaller amount of seeding in clay-coated seeds. At the early growth stage, the plant height of clay-coated seeds A was taller than that of drill-sown seeds, while the plant height of clay-coated seeds B was 0.7 cm shorter than that of drill-sown seeds. At the late growth stage, however, the difference was insignificant in both cases. The maximum tillering stage was 10 days earlier in drill-sown seeds. Lodging index was the lowest in clay-coated seeds B and there was no difference between clay-coated seeds A and drill-sown seeds. The ratio of stem base weight, culm diameter and culm wall thickness were higher in clay-coated seeds, while the lower internodes (4th, 5th and 6th) length was shorter in claycoated seeds than in drill-sown seeds. In clay-coated seeds, the number of panicle per $m^2$ was smaller, while the number of spikelet per panicle was a little larger than in drill-sown seeds. The rate of ripened grain and brown rice 1,000 grain weight were lower in the clay-coated seeds, thus the yield was $98{\sim}99%$ level of drill-sown seeds. Considering that the amount of seeding in clay-coated seeds was two-thirds of that in drill-sown seeds, it is expected that clay coating method could become an additional technique for direct seeding cultivation.

• 한국환경농학회지
• /
• 제18권3호
• /
• pp.265-271
• /
• 1999

본 연구는 암반절개사면에 천공 또는 브레이크를 이용하여 부분적으로 조성한(전사면의 $10{\sim}20%$) 식생기반에 자생수종(소나무, 붉나무, 담쟁이덩굴)의 종자 또는 파종립을 직파하여 식생을 도입하는 암반사면 부분 녹화법을 개발하기 위하여 실시되었다. 발아촉진처리된 종자에 피트모스, 진흙, 흡습제(3.5:1:0.2, v/v)를 피복한 파종립$(1{\sim}2cm^3)$은 대조구 종자보다 포장 및 현지 실험에서 발아율이 약 2배 더 높았다. 현지 실험에서 직파종자의 발아율 및 발아한 묘목의 생존율은 여름 및 가을철 직파시 보다 봄철 직파시에 더 높은 성공률을 보였다. 현지 실험에서 공시 수종의 파종립과 종자의 발아율은 퇴비가 포함된 배양토에서 $0{\sim}3%$로 매우 낮았는데 퇴비는 발아종자 또는 유묘의 모잘록병을 유발시키는 것으로 추정되었다. 유묘의 생존율은 외부 침입 초본류에 의한 피압과 피압 받은 후 겨울철 건조에 영향받은 것으로 판단되었다. 성공율이 낮은 여름철 직파법의 대안으로써 1998년 8월에 소나무, 담쟁이덩굴 2년생 포트묘를 암반절개지에 식재한 결과는 성공적이었다.

• 한국양식학회지
• /
• 제1권1호
• /
• pp.85-102
• /
• 1988

우리나라 진주양식에서 개발되어야 할 모패의 수급과 월동기술 등에 목적을 두고 1986년 12월부터 1988년 11월까지 시험조사를 하였다. 일본산 진주조개 (2연패)를 시료로 하여, 양성과 시술은 어구 앞바다에서, 월동은 고리와 서귀포 앞바다에서, 유생조사와 채묘시험은 한산만에서 실시하였다. 1. 어구양성장의 최고수온은 8월중 $23.6^{\circ}C$이었고 월동기간중 최하수온은 고리는 $13.2^{\circ}C$, 서귀포는 $14.0^{\circ}C$이었다. 먹이생물은 비교적 많은 편이지만 고리에는 부착생물 이외에도 뻘 등이 많아 전부착물의 $19.5\%$나 되었다 (어구와 서귀포는 각각 $13.2\%$와 $4.5\%$이었다). 2. 어구에서 성패의 성장은 양호한 편이었고 연령이 적은 조개일수록 성장이 빨랐다. 월동기간중 고리에서는 서귀포에 비해 성장은 약간 좋았으나 사망률은 약 2배나 되어 $20.5\%$이었다. 3. 진주의 생산율은 당년산이 $58.2\%$이었고 월동산은 $48.3\%$로 성적이 좋았다. 진주층의 두께는 당년산이 0.35 mm, 월동산은 0.47 mm이었으며, 핑크색이 가장 많아 $53.7\%$이었지만 가치가 적은 노란색도 $22.8\%$나 되었다. 품질 특급은 약 $10\%$이었다. 4. D형유생의 출현성기가 3차례 있었다. $10\%$정도가 성숙부유유생이 되었고 D형유생이 채묘기에 부착하는데는 약 1개월이 소요되었다. 부착은 1$\~$3 m층에 많았고 2 m층에 가장 많아, 삼나무가지 30 cm당 30$\~$40미이었다. 채묘장인 한산만에는 양성중인 모패가 많았고 수온이 높고 강수양이 적었던게 성공적인 채묘의 원인인 것 같았다.