• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.8
• /
• pp.1196-1200
• /
• 2007

Eight feeds (mixture of wheat straw and oil seed cakes in 3:1 ratio) were evaluated for methane emission and fermentation pattern with buffalo rumen liquor as inoculum in an in vitro gas production test. The cakes tested were groundnut cake (GNC), soybean cake (SBC), mustard seed cake (MSC), cotton seed cake (CSC), karanj seed cake expeller extracted (KCEE), karanj seed cake solvent extracted (KCSE), caster bean cake expeller extracted (CBCEE) and caster bean cake solvent extracted (CBCSE). The gas production (ml/g dry matter) was significantly higher with SBC and MSC followed by CSC, GNC, KCSE, KCEE, CBCSE and was the lowest with CBCEE. Methane emission was significantly lower with KCEE, KCSE, CBCEE, CBCSE (20.32- 22.43 ml/g DM) than that with SBC, GNC, CSC (27.34-31.14 ml/g DM). Mustard seed cake was in-between the two groups of oil cakes in methane production. In vitro true digestibility was highest with SBC followed by GNC, CSC, MSC, KCSE, KCEE, CBCSE and CECEE. Ammonia nitrogen level was positively correlated with the amount of protein present in the cake. Total holotrich protozoa were significantly higher with SBC, whereas, large spirotrich protozoa tended to be lower than with other cakes. The counts of small spirotrich and total protozoa were similar with all the cakes. Total volatile fatty acid production and acetate to propionate ratio were significantly higher with SBC and significantly lower with KCEE as compared to the other cakes. Among the conventional oil cakes tested in the present experiment (GNC, SBC, MSC and CSC), mustard seed cake-based feed produced the minimum methane without affecting other fermentation characteristics adversely.

• Current Research on Agriculture and Life Sciences
• /
• v.13
• /
• pp.65-70
• /
• 1995

The experiments were conducted to determine the influence of seed size and mucilaginous substance on seed germination of herbaceous peony collected from farmers' fields in Korea. No significant difference was recognized between the size of seed and the rale of germination. The maximum percentage(68%) of seed germination was obtained from the seeds with thin brown colour treated at $20^{\circ}C$. The amount of mucilaginous substances exuded from peony seeds was the highest in the seeds with black brown colour. Germination rate of peony seeds was negatively correlated with the amount of mucilaginous substance exuded from the seeds. High frequency(93%) of seed germination was obtained from the seeds which treated in the mixture(1:1) of sands and activated charcoal.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.4
• /
• pp.190-195
• /
• 2002

NaX zeolite crystals of a uniform particle size of 50 $\mu$m were grown by continuous crystallization method from seed crystals (10~20 $\mu$m) added into a 0.5~2.0 g mother liquor having a composition $3.5Na_2O : Al_2O_3: 2.1SiO_2: 1000H_2O$. In order to investigate the crystal growing by continuous method, the mother solution was supplied after 7 days, 5 days, 3 days and 1 day, respectively. The seeding resulted in an increase in the fraction of large crystals compared with unseeded batches and successfully led to an uniform NaX zeolite crystal. It was postulated that the seeding in the synthesis mixture leaded out increase of surface area for physical contact reaction and directed growth of seed crystal without the nucleation in the synthesis gel.

• Korean Journal of Materials Research
• /
• v.24 no.8
• /
• pp.407-412
• /
• 2014

Currently, diopside ($MgCaSi_2O_6$) crystal glaze is used frequently for pottery works or in earthen wares, though the process is not straightforward. However, to create and control the positions and sizes of the crystals in desired amounts when making pottery is difficult. To solve this problem, a diopside crystal seed was created at a temperature of $1450^{\circ}C$. After planting this seed in the glaze, a glaze combination and firing process which allows a user to create crystals with the desired position and at the desired size were established. In addition, in order to investigate the creation process of the crystals, the growth patterns of the crystals were observed and examined using Raman spectrography and XRD and SEM analyses. As a result, the optimum synthesis condition of the diopside seed was created by mixing 1 mole of $CaCo_3$, 0.2 mole of $(MgCo_3)_4(MgCoH)_2{\cdot}5H_2O$ and 2 moles of $SiO_2$ and then applying a firing process to the mixture at $1,450^{\circ}C$ for 30 minutes. The optimum glaze content of the seed was 70 % feldspar, 20 % limestone and 10 % $MgCo_3$. For the firing process, it was confirmed that the size of crystal is larger with a longer firing time at $1100^{\circ}C$ by completing a two-hour process at $1280^{\circ}C$. In addition, the diopside crystal has columnar structure and is less than $1{\mu}m$ in size.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.4
• /
• pp.81-90
• /
• 2005

This study aimed to address problems and suggest solutions in applying seed mixture design criterior of the slope revegetation works according to "The guidelines of Slope revegetation design and construction" proposed by the Ministry of Construction and Transportation. To do this, the planting thickness was set to be the same 2cm while the composition of seeds was made different, which was planted in artificial slopes and fields. The main results were summarized as follows. In the test, when applying the provisional standards of the plant mixtures proposed by the Ministry of Construction and Transportation, tree seeds and native plants were found poor coverage effect in the early stage in all test plots due to introduced grasses. This was because introduced winter grasses which grew well in the early stage, could grow densely, so it might hamper the growth of other plants. Therefore, it was found desirable that standards for seed mixing should be adjusted down by 10% and the ratio of introduced grasses in the mixture should be lowered to 25% while native plants should increase to 20-25%.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.4
• /
• pp.305-309
• /
• 1991

This experiment was conducted to investigate the effect of shattered grain by combine harvesting at the previous year on rice plant emergence at different planting methods and plant characteristics, The results are follows : Combine harvesting greatly influence on shattered grain of Samgangbyeo as Tongil variety (49.5kg/10a) compared to that of Nagdongbyeo as Japonica variety(27.8kg/10a), while Nagdong-byeo showed higher germination rate than Samgangbyeo, whether transplanted and direct seeded. Emergence of volunteer and seed mixture were lower in transplanted than in direct seeded. In variety test. Japonica variety showed higher emergence of volunteer rice and seed mixture than Tongil variety. Generally, no significant difference in yield components were observed with different varieties by the volunteer rice. But the volunteer rice caused by combine harvesting decreased culm length, panicle length, spikelet number, panicle number and ripening ratio. except l000-grain weights.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.399-399
• /
• 2008

Synthesis and characterization of ZnO structure such as nanowires, nanorods, nanotube, nanowall, etc. have been studied to multifunctional application such as optical, nanoscale electronic and chemical devices because it has a room-temperature wide band gap of 3.37eV, large exiton binding energy(60meV) and various properties. Various synthesis methods including chemical vapor deposition (CVD), physical vapor deposition, electrochemical deposition, micro-emulsion, and hydrothermal approach have been reported to fabricate various kinds of ZnO nanostructures. But some of these synthesis methods are expensive and difficult of mass production. Wet chemical method has several advantage such as simple process, mass production, low temperature process, and low cost. In the present work, ZnO nanorods are deposited on ITO/glass substrate by simple wet chemical method. The process is perfomed by two steps. One-step is deposition of ZnO seeds and two-step is growth of ZnO nanorods on substrates. In order to form ZnO seeds on substrates, mixture solution of Zn acetate and Methanol was prepared.(one-step) Seed layers were deposited for control of morpholgy of ZnO seed layers by spin coating process because ZnO seeds is deposited uniformly by centrifugal force of spin coating. The seed-deposited samples were pre-annealed for 30min at $180^{\circ}C$ to enhance adhesion and crystallinnity of ZnO seed layer on substrate. Vertically well-aligned ZnO nanorods were grown by the "dipping-and-holding" process of the substrates into the mixture solution consisting of the mixture solution of DI water, Zinc nitrate and hexamethylenetetramine for 4 hours at $90^{\circ}C$.(two-step) It was found that density and morphology of ZnO nanorods were controlled by manipulation of ZnO seeds through rpm of spin coating. The morphology, crystallinity, optical properties of the grown ZnO nanostructures were carried out by field-emission scanning electron microscopy, high-resolution electron microscopy, photoluminescence, respectively. We are convinced that this method is complementing problems of main techniques of existing reports.

• Journal of agriculture & life science
• /
• v.53 no.3
• /
• pp.27-39
• /
• 2019

The purpose of this study was to investigate the effect of hot water treatment and pH corrected lime sulfur combination treatment on the fungicidal and bacterial disinfection effects and germination rate of organic lettuce seeds. Among the followers, Alternaria sp. was infected 53.3% and Aspergillus sp. and Cladosporium sp. Infected 14.5% and 5.4%, respectively. Bacteria were isolated only Pseudomonas sp., and infected with 16.5%. In order to investigate the effect of disinfection on the temperature of hot water (45℃, 50℃, 55℃ and 60℃). The seed germination rate sharply decreased with increasing temperature and treatment time. The germination effect and germination rate of the follower were highest when hot water treatment was carried out for 20 minutes in hot water at 50℃. In the case of combined treatment of 50℃ hot water for 10 min and 0.4% pH adjusted lime sulfur mixture, showed the highest sterilization effect and germination rate with 100% and 97.6%, respectively. The results of this study can contribute to the development of technology to sterilize not only seed surface but also fungi and bacteria inside of seed.

• Journal of Life Science
• /
• v.12 no.6
• /
• pp.721-730
• /
• 2002

This study was carried out to select new pelleting binder and material for Welsh onion seeds. The optimum treatments of the various plant growth regulators to improve seed germination of the Welsh onion was also estimated. There were no significant effects of growth regulators on the germination percentage, but germination was faster according to the number of days to 50% of the final germination ($T_{50}$) and the mean number of days to germination (MDG) than those of the control. Germinability was increased when the seeds were soaked in gibberellic acid ($GA_3$) solution for 24hrs, even though there was no synergy effect on the germinability when $GA_3$ was mixed with 6-benzylaminopurine (BAP). The optimum treatment for improving germination of Welsh onion was observed when the tested seeds was soaked in 500 $\mu$M of $GA_3$ at $20^{\circ}C$ for 24hrs. Also, when the seeds soaked in the aforementioned treatment, the rate of germination was increased at lower temperature than at $20^{\circ}C$, the optimal temperature. The percentage and the speed of seed germination depended on the kinds of pelleting binder and their concentration. It showed that the higher the concentration of the binder for seeds pelleting, the lower the percentage of seed germination. Among the pelleting binder, polyvinyl alcohol (PVA) and polyvinyl pyrrolidone (PVP) were the best binders for seed pelleting, because seed germination using those binder did not affect on the concentration of binder. On the other hand, Carboxymethy cellulose (CMC) and methyl cellulose (MC) severely inhibited the seed germination The germinability was also different arcording to the pelleting materials. Among the different 58 pelleting materials, kaoline alone, the mixture of bentonite and kaoline, the mixture of bentonite, calcium carbonate and diatomaceous earth #300 were found as the best pelleting materials for welsh onion seeds.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.6 no.1
• /
• pp.21-30
• /
• 1998

The effects of compost inoculation on the degradation of cellulosic fraction in composting of food waste and paper mixture were investigated by bench-scale composting. With the increase of seed inoculation, the time to reach the peaks of temperature, $CO_2$ evolution rate, and ammonia evolution rate was reduced, indicating that seed compost had beneficial effects on the enhanced degradation of organic materials at the early stage of composting. However, the final conversion of organic matters and the loss of ammonia were not affected by the amount of seed compost inoculated. The increasing of seed inoculum also resulted in the higher level of cellulase activity at initial stages and rapid rise to the maximums, suggesting that initial supply of sufficient cellulolytic microorganisms might facilitate the evolution of cellulase activity. The cellulose was degraded substantially during the increasing phase of cellulase activity, while they showed similar values at the end of 20 days composting. As a result, the seed inoculation seemed to be effective to the enhanced evolution of cellulase activity and cellulose degradation at initial stage of composting. But it did not contribute to increase the final degradation of cellulose after the entire composting reaction of 20 days.