• Title/Summary/Keyword: seed growing

Search Result 395, Processing Time 0.025 seconds

Studies on the Procedures of Accelerating Generation Advancement in Wheat and Barley Breeding IV. Advancement of Two Generations of Wheat Materials a Year at Suweon by Growing a Summer Generation (맥류의 세대촉진방법에 관한 연구 IV. 수원지역에서 소맥 1년 2기작 세대촉진재배)

  • Seong, B.Y.;Cho, C.H.;Park, M.W.;Hong, B.H.;Ahn, W.S.;Nam, J.H.
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.25 no.4
    • /
    • pp.35-42
    • /
    • 1980
  • To establish a generation acceleration technique, two crops a year at field condition of Suweon, 10 varieties different in their spring growth habit were tested with 6 different seeding time after harvesting. These materials were harvested on June 10, 19, 79 and tested for their seed production ability at varions seeding time from July I I to August 15 with a week interval. An immatured seed germination technique and green vernalization methods were applied in cycling generations and the results obtained were summarized as follows. 1. In summer growing, seedlings establishment after transplanting was better in earlier transplanting. 2. Heading time was remarkably enhanced by earlier transplanting. Considering the results of two years early or mid of July was the suitable time to plant the second summer crop. 3. Those varieties of spring growth habit expressed little variations in plant height among the varieties. In 1978 which is referred as warm year produced plant height as tall as 8-16cm and poor crop but produced good crop with 25-65cm plant height in 1979. 4. No definit tendency in the length of spike was. observed among the cultivars but longer spike was found in winter wheat compared to the spring. 5. Number of spikes per plant was ranged from 1 to 3 regardless the transplanting time in 1979. However, more spikes per plant were produced in early or mid of July transplanting and those varieties of higher growth habit than V did not produces any spikes. 6. Higher number of grains per spike was found at earlier transplanted varieties. Therefore, it is concluded that those materials of I-IV growth habit with mid or early July transplanting would be suitable in practical sense considering their ability of seed production. 7. Two-year results indicated that wheat crop can not tolerate the temperature level higher than average 32$^{\circ}C$ C at Suweon. In this regard, the cultivation schedule was established assuming average temperature condition like the year of 1979 which was possible to grow wheats.

  • PDF

Effect of Low Night Temperature on Reproductive Organ Development in Relation to Pollen Viability of Bell Pepper (야간 저온조건이 파프리카 화분 활력 및 생식기관 발달에 미치는 영향)

  • Lim, Chae-Shin
    • Journal of Life Science
    • /
    • v.19 no.5
    • /
    • pp.581-586
    • /
    • 2009
  • Bell pepper plants (Capsicum annuum cv. Plenty) were grown under low night temperatures (LNT: day/night temperature of $28/13^{\circ}C$) and optimum night temperatures (ONT: day/night temperature of $28/20^{\circ}C$) in growth chambers. Pollen grains were collected from plants in the growth chamber and incubated at 10, 15, 20, 25, and $30^{\circ}C$. After 24 hr incubation, in both ONT and LNT, the highest percent pollen germinations were observed at $25^{\circ}C$ followed by germinations at $30^{\circ}C$. Percent pollen germination at $25^{\circ}C$ was 42% in ONT - two times higher than in LNT at 21%. Pollen tube length was much longer at ONT than at LNT, regardless of incubation temperature. Compared with other treatments, earlier and quicker pollen tube elongation was observed in ONT pollen grains incubated at $25^{\circ}C$. To find pollen viability in plant growing conditions, pollen grains were incubated in LNT ($28/13^{\circ}C$) and ONT ($28/20^{\circ}C$) growth chambers for 24 hr. Petri-dishes with pollen grains were put in the growth chambers at the beginning of the night condition. Pollen grains in the LNT growth chamber did not germinate at night ($13^{\circ}C$), but began to germinate when the day condition ($28^{\circ}C$) started. Pollen grains in the ONT condition, however, started germinating from the early night ($20^{\circ}C$) and germination continued during the day ($28^{\circ}C$). Plants in LNT showed increased flower stalk length, ovary diameter, stamen length, flower weight, and fruit length. LNT conditions did not impair seed set. There were no differences in seed sets between fruits at LNT and ONT. Normal seed sets in LNT show that fertilization may be completed during daytime. However, further investigation is needed to find what extent of temperature stress causes malformed and/or parthenocarpic fruits in this bell pepper.

Status of Maize Production and Distribution in South East Asia (동남아시아 옥수수 생산 및 유통현황)

  • Lee, Sang-Kyu;Song, Jun-Ho;Baek, Seong-Bum;Kwon, Young-Up;Lee, Byung-Moo
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.60 no.3
    • /
    • pp.318-332
    • /
    • 2015
  • The maize production in South-eastern Asian countries showed a continuous increase with increasing poultry-livestock from the beginning of the 1990s to early 2010. Also the need for a new variety development of each contries was increased rapidly in the same period. Single-Cross hybrid varieties have been developed and supplied from 2001 instead of multi-cross maize varieties since 1992 in Indonesia. In Cambodia, CP group is mainly manufacturing feeds with most of the forage maize from farmers who are growing its seeds from the company. Cambodian main cultivars are varieties of multinational corporations such as DK8868 from Monsanto, NK6326, NK7328 from Syngenta and CP333 from CP group including local business company. Vietnam is the main maze importing country in South-Eastern Asia which had imported 13 times scale of amount compared to exports in average from 1990 to 2011. Vietnamese government has developed a range of varieties for improving their efficiency in production, such as the LVN-10 with political investments. Their production has been reached to 80% of the total. According to the 2012 MIFAFF (Ministry for Food, Agriculture, Forestry and Fisheries) data in Korea, domestic edible maize cultivation area was approximately 15,000ha. It showed 74,399 tons of production, 3.8% of food self-sufficiency in maize and around 0.9% of grain self-sufficiency rate. The consumption of grain is mostly rely on imports in Korea. To overcome the limit of the domestic seed market and increase maize self-sufficiency, the need to develop maze varieties for world-class is increasing at present through analyzing the market trend and prospect of the seed industry in South-eastern Asia.

Comparison of Growth Characteristics, Antioxidant Activity and Total Phenolic Contents of Amaranthus Species according to the Different Cultivation Regions and Varieties in South Korea (안데스 작물 '아마란스'의 재배지역과 품종에 따른 생육특성, 항산화활성 및 총페놀함량 변화)

  • Hong, Su-Young;Cho, Kwang-Soo;Jin, Yong-Ik;Yeon, Young-Ho;Kim, Su-Jeong;Nam, Jeong-Hwan;Jeong, Jin-Cheol;Kwon, Oh-Keun;Sohn, Hwang-Bee
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.59 no.1
    • /
    • pp.16-21
    • /
    • 2014
  • Yield, growth characteristics, free radical-scavenging capacities, total phenolic contents and free amino acids contents were determined in Amaranthus species grown in Korea. And this study was aimed to investigate the functional properties of Amaranthus in two regions(Gangneung and Daegwallyeong). Yield ranged from 125 to 465 kg $10a^{-1}$ and RRC 1027 was the highest yield. Amaranthus seed size was very small, average seed weight(1,000 seeds) varied 0.42~0.82 g, especially Kerala Red was the most light weight. In DPPH (1,1-diphenyl-2-picryl hydrazyl) radical scavenging activity, there is no significantly different between growing regions but colored Kerala Red was the highest among varieties. The total amount of phenolic compounds varied from 994 to 1,732 mg/kg. Among amino acids of seeds, the contents were in order of glutamic acid(30.5 mg $100g^{-1}$) > aspartic acid (26.1 mg $100g^{-1}$) > arginine(24.3 mg $100g^{-1}$). The present study shows that South Korea is suitable for the cultivation of Amaranthus. Common grains lack glutamic acid, aspartic acid and arginine we need for optimal health, but Amaranthus contains these amino acids. Amaranthus is great potential to develop new crop. But for measurement of antioxidant activity, in addition to DPPH method we are looking the other way.

Germinability, Morphological Development during Germination and Anatomical Observation Gentiana scabra Bunge var. buergeri Max. (자생 용담의 발아성 및 발아과정 중의 형태 형성과 조직의 해부학적 관찰)

  • Son, Byung-Gu;Choi, Young-Hwan;An, Jong-Gil;Cho, Dong;Kang, Jum-Soon;Jung, Yong-Mo;Kwon, Oh-Chang
    • Journal of Life Science
    • /
    • v.9 no.2
    • /
    • pp.127-135
    • /
    • 1999
  • Gentiana scabra Bunge var buergeri Max, can be widely used such as cut-flower, ornamental and medicinal plant among the native plants. Microscopic and Scanning electron microscopic observation plant were carried out to estimates the characteristics correlated with germinability and germination process, and the results were as follows. The seeds were germinated just after harvest, and it means that there is no or little dormancy of the seeds. Matured seeds showed higher germinability than those of immatured. As the storage period was longer, immatured seeds showed shorter longevity than those of matured. The average longevity was about 190 days. According to the observation results of morphological changes during the germination, seed coat was expanded with water absorption immediately after seeding, and radicals were observed 2 days after seeding. Root hairs were formed behind the growing tip of the root on 4 days after seeding and cotyledon were unfolded on 6 days after seeding. In the microscopic observation of leaf tissues, it could be easily distinguished between midrib, and leaf blade, and also observed upper epidermis, palisade parenchyma and spongy parenchyma consisted as a sing1e layer. Palisade parenchyma was consisted of a single layer of cell. Stomata were restricted lower surface, arranged as anamocytic type, and surrounded by guard cells. In the microscopic anatomy of stem were consisted of cortical layer, forming a single layer of epidermis and parenchyma, and vascular bundle which was consisted of continuous cylinder of vascular tissues.

  • PDF

Production of Carpet Sod Using Seed and Runner of Zoysiagrass (Zoysia spp.) (한국잔디(Zoysia spp.)의 종자 및 영양체를 이용한 carpet 잔디 생산)

  • 최준수;양근모;김동섭
    • Asian Journal of Turfgrass Science
    • /
    • v.15 no.2
    • /
    • pp.39-50
    • /
    • 2001
  • This research was designed to develop the rapid propagation technology of zoysiagrass using carpet production and to provide turf-growing farmers with efficient cultivation methods thor carpet production. Turfgrass cultivar tested in cadet production by seeding was Z. japonica cv. Zenith. Since the surface coverage rate reached to 85% in 2 months after seeding at the rate 6g/$m^2$ in the early part of July, carpet production using ‘Zenith’seeds would be possible to produce within within the same year. Thrfgrasses tested in carpet production by vegetative propagation were Z. japonica, medium type Z. matrella, fine type Z. matrella, and medium type Z. japonica. Planting rates of vegetative parts (sprigs) were 1.2L/$m^2$, 2.4L/$m^2$, 2.5L/$m^2$, and 5L/$m^2$. Two different sizes of sprig were used; 1~2 nodes and 3~4 nodes. Surface coverage rate was 90% in one year after planting at the rate of 2.5L sprigs of medium type Z. japonica. Therefore, the use of sprigs with 3~4 nodes at the planting rate of 2.5L would be suitable for the carpet prodcution. Three months old zoysiagrass carpet (Zenith) was overseeded with Kentucky bluegrass, perennial ryegrass, and tall fescue at two different overseeding rate. Surface coverage rate was the highest (80%) at the plot overseeded with perennial ryegrass that showed the earliest germination. Suitable overseeding species for the rapid sod formation at the early stage of establishment were tall fescue and perennial ryegrass and desirable overseeding time was from early to middle of September.

  • PDF

Experimental Studies for Analyzing Direct Contamination Pathway $^{54}Mn,\;^{57}Co,\;^{85}Sr,\;^{103}Ru$ and $^{134}Cs$ in Rice (벼에 대한 $^{54}Mn,\;^{57}Co,\;^{85}Sr,\;^{103}Ru,\;^{134}Cs$의 직접오염 경로분석 실험)

  • Choi, Yong-Ho;Lim, Kwang-Muk;Park, Hyo-Guk;Lee, Won-Yun;Lee, Chang-Mi
    • Journal of Radiation Protection and Research
    • /
    • v.25 no.1
    • /
    • pp.21-30
    • /
    • 2000
  • For analyzing the direct contamination pathway of radionudides in rice plants, a Solution containing $^{54}Mn,\;^{57}Co,\;^{85}Sr,\;^{103}Ru$ and $^{134}Cs$ was applied to the aboveground Parts of the between RI application and harvest. Its highest observed value was 0.94. The fractions of the initial plant deposition that remained in rice plants at harvest were in the range of $19{\sim}47%,\;17{\sim}43%,\;19{\sim}42%,\;23{\sim}61%$ and $11{\sim}69%$ for $^{54}Mn,\;^{57}Co,\;^{85}Sr,\;^{103}Ru$ and $^{134}Cs$, respectively, when no decay was assumed. The translocation factors of those radionuclides in hulled seeds were in the range of $6.9{\times}10^{-4}3.8{\times}10^{-2},\;3.6{\times}10^{-3}{\sim}1.6{\times}10^{-1},\;5.8{\times}10^{-4}{\sim}3.2{\sim}10^{-2},\;1.6{\times}10^{-4}{\sim}7.6{\times}10^{-3}$ and $3.2{\times}10^{-2}{\sim}2.0{\times}10^{-1}$, respertively, and were highest when they were applied at the stage of active seed development. It was indicated that the remaining percentage and translocation factor would not be greatly affected by the difference in the rain frequency if it is within a factor of 2. These results can be utilzed for predicting the radionuclide concentrations in rice seeds when an accidental deposition of those radionuclides occurs during the rice-growing season.

  • PDF

On flowering and maturing times of fruits and weight of seed by varieties of chestnuts in southern Korea (전남광양지구(全南光陽地區)의 밤나무 품종별(品種別) 개화기(開花期) 및 과실(果實)의 숙기(熟期)와 중량조사(重量調査))

  • Kim, T.W.
    • Journal of Korean Society of Forest Science
    • /
    • v.3 no.1
    • /
    • pp.36-42
    • /
    • 1963
  • The results obtained are summarized as follows: 1. In both years of 1960 and 1961, the flowering times, fading times of flowers, mature times of fruits of 63 chestnut varieties grown at Choosan area, Chon Nam, have been investigated. Almost the ages of trees were 26-year-old and they are growing on the brown forest soil well drained with relatively thick surface soil. 2. Non-significant difference in flowering time by the varieties has been found between the years. The carliests in floweing time are Toyotama-wase, The isho-wase, Asami-wase, Umehira-wase, i.e., bloomed on May, 22, or a little later. 3. The fading dates of flowers of each varieties almost linearly correlated to the flowering date. The blooming period of each varieties was about 10 to 12 days. 4. Linear correlation between mature time and blooming time are observed, i.e., the earlier the blooming time comes, the earlier is the mature time of chestnut fruit. 5. The varieties having the smallest sized seed, are Otomune and Boji-kuri, however, those having the large one, are Ho-gin, Katayama, Ohara-wase.

  • PDF

Growth of CdS Single Crystal by Sublimation Method (승화법에 의한 CdS 단결정 성장)

  • Jeong, T. S.;Kim, H. S.;Yu, P. Y.;Shin, Y. J.;Shin, H. K.;Kim, T. S.;Jeong, C. H.;Lee, H.;SHin, Y. S.;Kang, S. K.;Jeong, K. S.;Hong, K. J.
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.3 no.2
    • /
    • pp.125-130
    • /
    • 1993
  • We has made 2-zone vertical electric furnace and has been grown CdS single crystal by sublimation method in crystal growth tube with tail tube without seed crystal for growth. While it has been growing, temperature difference ${\Delta}T$ of source and growth part has nearly agreed with theoritical value $14.7^{\circ}C$and experimental value $15^{\circ}C$ Then, crystal of best quality has been grown, when temperature of tail tube has been $110^{\circ}C$, in spite of quickly pulling up crystal growth tube a degree O.38mm per hour. The grown crystal have had hexagonal structure and single crystal with c-axis to length of crystal growth tube from X- ray diffraction pattern of powder method and Laue pattern of back reflection Laue method. Also, the mobility and carrier density from Hall effect measurement have been $316cm^2/V{\cdot}sec$ and $2.90{\times}10^{16}cm^{-3}$ at the room temperature, respectively.

  • PDF

Automation of Information Extraction from IFC-BIM for Indoor Air Quality Certification (IFC-BIM을 활용한 실내공기질 인증 요구정보 생성 자동화)

  • Hong, Simheee;Yeo, Changjae;Yu, Jungho
    • Korean Journal of Construction Engineering and Management
    • /
    • v.18 no.3
    • /
    • pp.63-73
    • /
    • 2017
  • In contemporary society, it is increasingly common to spend more time indoors. As such, there is a continually growing desire to build comfortable and safe indoor environments. Along with this trend, however, there are some serious indoor-environment challenges, such as the quality of indoor air and Sick House Syndrome. To address these concerns the government implements various systems to supervise and manage indoor environments. For example, green building certification is now compulsory for public buildings. There are three categories of green building certification related to indoor air in Korea: Health-Friendly Housing Construction Standards, Green Standard for Energy & Environmental Design(G-SEED), and Indoor Air Certification. The first two types of certification, Health-Friendly Housing Construction Standards and G-SEED, evaluate data in a drawing plan. In comparison, the Indoor Air Certification evaluates measured data. The certification using data from a drawing requires a considerable amount of time compared to other work. A 2D tool needs to be employed to measure the area manually. Thus, this study proposes an automatic assessment process using a Building Information Modeling(BIM) model based on 3D data. This process, using open source Industry Foundation Classes(IFC), exports data for the certification system, and extracts the data to create an Excel sheet for the certification. This is expected to improve the work process and reduce the workload associated with evaluating indoor air conditions.