• Journal of Preventive Medicine and Public Health
• /
• v.29 no.4 s.55
• /
• pp.831-842
• /
• 1996

Demand for high quality medical care has recently been increasing in step with high level of income and education. Patients prefer the use of large general hospitals to small community hospitals. Large hospitals, usually located at urban area, expand their capacities to cope with the increasing demand, therefore, they easily secure revenue necessary for growth and development of hospitals. However, small community hospitals are facing with serious financial difficulties caused from the reduction of patients in one hand and the inflation of cost in another. If small rural hospitals were closed, the closure would have negative impacts on local economies in addition to the decrease in access to medical care. Community leaders should have an insight on the contribution of community hospitals to local economies. They could make a rational decision on the hospital closure only with the understanding of hospital's contribution to the community. This study is designed to develop an economic model to estimate the contribution of rural hospital to local economies, and also to apply this model with a specific hospital. The contribution of a hospital to local economies consists of two elements, direct effect and multiplier effects. The direct impacts include hospital's local purchasing power, employee's local purchasing power, and the consumption of patients coming from outside the community. The direct impact induces multiplication effect in the local economy. The seed money invested to other industries grows through economic activities in the region. This study estimated the direct effect with the data of expenditure of the case hospital. The total effect was calculated by multiplied the direct effect with a multiplier. The multiplier was drown from the ratio of marginal propensity of income and expenditure. Beside the estimation of the total impacts, the economic effect from the external resources was also analyzed by the use of the ratio of patients coming outside the region. The results are as follows. 1. The direct economic contribution of the hospital to the local economy is 1,104 million won. 2. The value of multiplier in the region is 2.976. 3. The total economic effect is 3,286 million won, and the multiplication effect is 2,182 million won. 4. The economic contribution from the external resources is 245 million won which is 7.5% of the total economic effect.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.4 no.2
• /
• pp.147-151
• /
• 1983

In order to know the effect of planting date and cutting management on Jerusalem Artichoke (Helianthus truberosus L.) as a new forage or energy crop, JA tubes were planted from April 7 to June 27 with 20 day interval. Growth and yield could stay high as normal planting if tuber planting had been done until late May. The delayed planting after June caused deterioration of seed tuber, produced poor emergence and retarded growth. Previous harvested field did not need additional planting every spring because there were enough leftover tubers usually small size, less than 3gr., to provide a dense seedling establishment. This plot had too dense in population to adjust its spacing by thinning some of seedlings. One or two times cutting for forage or silage production reduced tuber yield very significantly. Therefore, it was not a good management to harvest for both forage and tuber production. Topping at 20cm from growing point in early July prevented from lodging and assured tuber yield.

• Horticultural Science & Technology
• /
• v.34 no.1
• /
• pp.142-153
• /
• 2016

The present study investigated identification of cultivars through phylogenetic analysis of 108 Citrus varieties and related cultivars using simple sequence repeat (SSR) markers. Two hundred three SSR primer pairs were used to detect polymorphic markers among 8 Citrus cultivars consisting of 4 mandarins, 1 orange, 1 tangor, 1 tangelo, and 1 pumelo. Eighteen SSR primer pairs were reproducible and showed highly polymorphic alleles. These markers were applied to assess genetic variations of the 108 varieties. Each marker detected 5-14 alleles, with an average of 9.28. The polymorphism information content varied from 0.417 to 0.791 with an average of 0.706. Cluster analysis with SSR markers resulted in 13 major groups reflecting cultivar types and pedigree information. Twelve orange cultivars in the $I-1^{st}$ sub-cluster and 23 mandarin cultivars in the $II-1^{st}$ sub-cluster, respectively, were not discriminated using the SSR markers. This could be due to narrow genetic backgrounds originated through bud mutation or nucellars seedlings. The SSR profile database of Citrus cultivars will be useful as a tool for protection of plant breeders' intellectual property rights in addition to assessing genetic diversity in Citrus cultivars and germplasms.

• Journal of agriculture & life science
• /
• v.44 no.3
• /
• pp.31-40
• /
• 2010

This study was carried out to offer a basis data for conservation and application of effective management of Camellia japonica stand in Hakdong, Geoje Island. Field survey was conducted at C. japonica stand, mixed stand, Chamaecyparis obtusa plantation, and Pinus thunbergii stand. Importance value of C. japonica at tree layer was highest in C. japonica stand and mixed stand, and that of C. obtusa and P. thunbergii were highest in C. obtusa plantation and P. thunbergii stand, respectively. At subtree layer, C. japonica, Callicarpa dichotoma, Neolitses serices, and Styrax japonica had the highest importance value in C. japonica stand, mixed stand, C. obtusa plantation, and P. thunbergii stand, respectively. The species diversity ranged from 0.121 to 1.589 in C. japonica stand, 0.543 to 1.540 in mixed stand, 0.276 to 1.321 in C. obtusa plantation, and 0.764 to 1.523 in P. thunbergii stand, respectively. Soil pH was 5.72 in C. japonica stand, 5.26 in mixed stand, 5.21 in C. obtusa plantation, and 5.32 in P. thunbergii stand. The content of organic matter and total N were 5.77, 0.48% in C. japonica stand, 4.41, 0.30% in mixed stand, 3.28, 0.33% in C. obtusa plantation, and 5.32, 0.28% in P. thunbergii stand.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.1
• /
• pp.15-22
• /
• 2009

This study was conducted to examine characteristics of rhizome growth and flowering of white lotus (Nelumbo nucifera) plant in Muan Hoesan-lake for collecting the basic data on the cultivation and the flowering which is growing in Muan Hoesan-lake of Jeonnam province in Korea. We have planted from the seeds and the enlarged rhizomes of the white lotus which were planted in the plastic containers on April 20 and May 4, 2008, and cultivated under rain shelter condition. Rhizome growth pattern and the flowering characteristics of the white lotus were examined on September 4, 2008. Main rhizomes of the white lotus propagated by the seeds and the enlarged rhizomes were branched by 10% and 15%, respectively. Numbers of nodes in the bloomed and non-bloomed rhizomes of the white lotus were over 14 and below 11, respectively. Flower was not observed in the white lotus when propagated with seeds, however, flowers came out up to 80% by the enlarged rhizomes. First flowers were bloomed from the late July and to the early August, and the number of flowers were 4.0~4.4. The first flower stalks without branching of the main rhizome were emerged in 8.8th node, however, that with branching were 8.0th node. Time to flowering from the emergence of flower stalk on the above-ground parts were required 16 days. White flowers from the lotus were 15.3 cm in height and 28.2 cm in width, their longevity was 3.3 days and the averaged flower fresh weight was 29.2 g. The results conclude that optimum number of nodes on the main rhizomes for blooming the white lotus flowers should be over 8 nodes before the rhizome enlargement.

• Journal of agriculture & life science
• /
• v.45 no.5
• /
• pp.49-56
• /
• 2011

This study was conducted to provide data for the maintenance of the Corylopsis coreana community within the Hallyeohaesang National Park. Survey site of Corylopsis coreana community was located at a valley, which composed of over 60% exposed rock. As this result, much of the species was damaged or washed away due to the water flow from rainfall. The tree layers dominant species were Quercus serrata and Pinus densiflora. while the subtree layers dominant species were Corylopsis coreana, Acer pseudosieboldianum, Sapium japonicum, Chamaecyparis obtusa and Cornus kousa etc. The shrub layers dominant species were Callicarpa japonica and Smilax china etc., and herbaceous layers dominant species were Disporum smilacinum etc. Increased precipitation and rainfall days were observed from May to September in this valley during 2008~2010, which likely increased soil erosion and damage. Because water flow pattern was dispersed the Corylopsis coreana seed and the soil floor was shallow, and population of Corylopsis coreana seedlings were diminished.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.3
• /
• pp.265-269
• /
• 2021

This study was conducted to provide primary data through analysis of zoysia grass genetic resources to develop grass cultivars with beneficial novel properties. Zoysia grass (Zoysia. spp) is native to Korea, and is mainly propagated through stolons. However, since seed coat treatment technology was developed, the breeding of sexually reproductive grass variants has become possible, necessitating characterization of the floret appearance rate in the secured zoysia grass genetic resource before developing sexually reproductive cultivars. In this experiment, 549 grass lines were examined, revealing that florets appear in only 43 lines (7.81%). Survival rates after transplantation, and stolon generation rates displayed a significant positive correlation (Rho = 0.44). Survival rates after transfer, and rates of stolon production displayed very low correlations with floret appearance (Rho = -0.11 and Rho = -0.06). No significant results were obtained in 43 lines that displayed >20% floret appearance. To breed sexually reproductive grass variants, it is thus necessary to secure more genetic resources, considering the low rate of floret appearance. Finding traits that predict floret appearance at an early stage is also required.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.41 no.3
• /
• pp.168-175
• /
• 2021

The optimal determination of seeding rate is critical to minimizing uncertainties about the large variations observed in forage quality and productivity when alfalfa is cultivated under different geographical areas and growing conditions. The objective of this investigation was to provide information about the proper seeding rate according to harvest timing for alfalfa cultivation in the Northern regions of Korea. Alfalfa was sown in September 2018 at a seeding rate of 20, 30 or 40 kg/ha and harvested four times in 2019: May 3, July 2, September 11, and October 13. Regardless of seeding rate, alfalfa plant height was longest at the third harvest (113 cm) and the shortest in the last annual harvest (43.8 cm). However, seeding rate had no effect on alfalfa plant height at any harvest. Forage relative feed value was increased in the first cutting but decreased in the third cuttings as seeding rate increased. However, seeding rate had slight effect on alfalfa forage quality components at the second and fourth cuttings. Total annual DM and crude protein production (in 4 harvests) was greater at higher seeding rates. Plots seeded at a rate of 40 kg/ha produced on average 1,257 and 2,620 kg/ha more forage (DM basis) than those seeded at a rate of 30 or 20 kg/ha, respectively. Forage DM production at the first, second, third, and fourth harvests accounted for 36.1, 24.0, 27.1, and 12.8 % of total annual DM production, respectively. Overall, small differences were seen when alfalfa seeding rate was different but maximum forage DM production (in four harvests) was detected when seeding rate was 40 kg/ha. These data could be useful to the alfalfa growers by allowing them to make more accurate trade-offs between seed price and the expected magnitude of forage yield gains in order to select the best seeding rate.

• Korean Journal of Organic Agriculture
• /
• v.29 no.1
• /
• pp.97-109
• /
• 2021

Plant parasitic nematodes are causing significant damage in crop production. There is a need to develop eco-friendly nematicide that reduces the damage of nematode and has little effect on the environment and human. In this study, we have isolated a substance having nematicidal activity from Ginkgo biloba L. outer seedcoat. Studies of G. biloba L. outer seedcoat are insufficient compared to the seed and leaves due to their odor and toxicity. The dried G. biloba L. outer seedcoat was extracted with dichloromethane:methanol (1:1) and fractionated into hexane, ethyl acetate and H₂O. Four steps TLC were performed from EtOAc fraction to purely isolate GB4-3 with nematicidal activity. To compare nematicidal activity, G. biloba L. seedcoat methanol extract and purified GB4-3 were investigated in terms of treatment concentration and time. As a result, the nematicidal activity increased with concentration and time. In the place treated with 20 ㎍/mL of crude G. biloba L. seedcoat MeOH extract, strong activity appeared after 12 hours, and 46% nematicidal activity shown after 18 hours. About 69% of nematicidal activity was confirmed in the place where GB4-3 purified from outer seedcoat was treated with 20 ㎍/mL, and the possibility of development as nematicide was very high. This study could be used as a basic data for the development of a nematode preparation from G. biloba L. outer seedcoat.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.2
• /
• pp.102-108
• /
• 2019

Pericarp thickness of vegetable corns such as sweet and waxy corn is one of the crucial traits, contributing to their edible quality. This study was carried out to compare the pericarp thickness of super sweet and waxy corn hybrids measured with kernel samples prepared using different methods at different grain filling periods. The samples comprised excised pericarp from dried, frozen (at $-4^{\circ}C$), and fresh kernels. Analysis of variance performed separately on super sweet and waxy corn hybrids indicated a significant three-way interaction among cultivars, kernel sample preparation methods, and days after pollination (DAP). Dried samples of super sweet corn hybrids presented reasonably stable pericarp thickness measurements during grain filling, while all the sample preparation methods fluctuated less as grains of waxy corn hybrids matured. Waxy corn is best consumed at around 24 days after pollination. Pericarp thickness of waxy kernel samples regardless of preparation methods investigated was the same at 24 DAP with a few exceptions. Overall, the common method of drying kernel samples before pericarp excision can provide reliable data for estimating the tenderness of vegetable corn hybrids.