• Journal of Internet Computing and Services
• /
• v.23 no.3
• /
• pp.47-56
• /
• 2022

The safe driving reward system aims to reduce the loss of life and property by reducing the occurrence of accidents by motivating safe driving and encouraging active participation by providing direct reward to vehicle drivers who have performed safe driving. In the case of the existing digital tachograph, the goal is to limit dangerous driving by recording the driving status of the vehicle whereas the safe driving reward system is a support measure to increase the effect of accident prevention and induces safe driving with financial reward when safe driving is performed. In other words, in an area where accidents due to speeding are high, direct reward is provided to motivate safe driving to prevent traffic accidents when safe driving instructions such as speed compliance, maintaining distance between vehicles, and driving in designated lanes are performed. Since these safe operation data and reward histories must be managed transparently and safely, the reward evidences and histories were constructed using the closed blockchain Hyperledger Fabric. However, while transparency and safety are guaranteed in the blockchain system, low data processing speed is a problem. In this study, the sequential block generation speed was as low as 10 TPS(transaction per second), and as a result of applying the acceleration function a high-performance network of 1,000 TPS or more was implemented.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.6
• /
• pp.409-412
• /
• 2002

This research was conducted to obtain the fundamental data on salt injury and different responses among cultivars in winter barley (Hordeum vulgare L.). Salts did not affect yield components including number of panicles, stem length, grain number per ear and grain yield while reduced stem dry weight and thousand seed weight significantly with increasing concentrations of salt from 60 to 180 mM. NaCl had less injury effect on barley straw dry weight and thousand seed weight than did $MgSO_4$. Chlorophyll content and relative turgidity in flag leaf were reduced when treated with both salts, while free proline in the salt-treated leaf was increased. Content of proline in salt-treated barley was about 10 folds compared to the control. Based on yield components and physiological traits of flag leaf, the tolerance to salt injury was the greatest in Baegdong, followed by Dongbori#1, Mogpo#55, and Gangbori. The results suggested that salt- stressed barley at reproductive stage had higher free proline content, and that special management in this stage must be considered because salt stress at heading stage affect flag leaf growth as well as yield components Harmfully.

• Korean Journal of Poultry Science
• /
• v.28 no.3
• /
• pp.239-244
• /
• 2001

To examine the effects of feed additives on the expression of Perpheral blood cell surface molecules, phagocytosis and antigen specific antibody formation, broilers were randomly assigned to T$_1$, T$_2$, T$_3$, and T$_4$ groups. T$_1$ group was fed diet without any additives for 13 weeks, T$_2$ was fed diet with full fat flax, T$_3$ was fed diet with full fat flax containing $\alpha$-tocopherol, and T$_4$ was fed diet with full-fat flax containing $\alpha$-tocopherol and selenium. Since 5 weeks feeding the data were examined by luminometer. After 2 weeks adminstration of different feeding, although all treated groups (T$_2$, T$_3$, and T$_4$,) showed slightly increased chemiluminescence (CL) responses than T$_1$, this result was not significant. After 4 weeks feeding there was no significant increase of CL in the Phagocytes like neutrophils and macrophages of T$_2$ group compared to T$_1$. But phagocytes from T$_3$ and T$_4$ group showed in creased $O_2$- (6%, 18% respectively) as well as $H_2O$$_2$ (9.5% and 10.9%, respectively) induced CL responses. After 8 weeks feeding there was more than 50% increase $O_2$- induced CL in T$_3$ and T$_4$ group, but $H_2O$$_2$ induced CL responses in T$_3$ and T$_4$ group was slightly increased (6.6% and 9.3%, respectively).

• Asian Journal of Turfgrass Science
• /
• v.25 no.1
• /
• pp.1-10
• /
• 2011

This study was conducted to investigate early germination characteristics and germination pattern of new cultivars of creeping bentgrass (CB, Agrostis pall/stris Huds.) under natural room temperature conditions and to analyze differences between alternative and natural conditions. Seven cultivars of CB were tested in the study. Daily and cumulative germination patterns were measured and analyzed on a daily basis. Significant differences were observed in germination pattern, days to the first germination, days to 50% germination, days to 85% germination, and germination rate among cultivars under different environments. The first germination in all entries was initiated between 4 and 5 days after seeding (DAS) under alternative conditions, while between 6 and 8 DAS under natural conditions, being 2 to 3 days later as compared with that of alternative conditions. As for the first germination percentage, it was generally 5 to 25% under alternative conditions. However, 'Penn A-1', 'Penncross', and 'Penn A-4' cultivars showed a vigorous germination, producing 50 to 70%. Under natural room temperature conditions, it was 5 to 10% for the most entries, except 'Penncross', 'L-93', and 'Penn A-4' cultivars which vigorously produced 20 to 50%. Days to the 50% germination in CB resulted in 4 to 10 DAS under alternative conditions, while 6 to 15 DAS under natural conditions, being 2 to 5 days later than under alternative conditions. Days to the 85% germination were 5.90 to 11.75 DAS under alternative conditions and 7.95 to 12.50 DAS under natural conditions. 'Penn A-1' and 'L-93' were the fastest cultivars under alternative and natural conditions, respectively. Regardless of the temperature conditions, the longest cultivar in germination was 'T-1', being over 11 DAS. In-depth comparative data on germination characteristics and germination patterns among CB cultivars would be usefully applied for a practical CB turf establishment in golf course construction etc.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.63 no.3
• /
• pp.175-185
• /
• 2018

The aim of this study was to evaluate the variation of growth and quality characteristics in colored rice from 178 accessions and to develop useful, basic rice breeding data by classifying these germplasm characteristics via principal component (PC) analysis. The coefficient of variation of the 178colored rice accessions were the highest for panicle length (PL) and protein contents, followed by length-width ratio (LWR), 1000-grain weight (TGW), culm length (CL), and amylose contents, whereas the lowest was for the number of panicles per hill (NP), which is a yield component. The results from the PC analysis exhibited eigenvalues and contributions respective to each PC as follows: PC1, 2.06 and 29.49%; PC2, 1.31 and 18.75%; PC3, 1.21 and 17.36%; PC4, 1.01 and 14.38%. The eigenvalues of four PCs were over 1.0, and their cumulative contributions were 79.98%, which completes the necessary condition for evaluation of the 178 colored rice accessions. Cluster analysis showed cluster I as the largest, which included 79 accessions, while clusters II, III, IV, V, VI, and VII comprised 46, 19, 13, 4, 8, and 9 accessions, respectively. Moreover, dark brown accessions were dispersed in clusters I and II, and many resources of purple seed coat color were found in clusters V, VI, and VII. Particularly, cluster V had resources of only black and purple seed coat colors. Resources of cluster VII were found to have a relatively small average CL, PL, and LWR; notably, cluster V had the smallest average TGW, and cluster IV the lowest NP but the highest TGW. Finally, considering the yield potential, growth characteristics, heading stage, and color during breeding of colored rice, we obtained the following conclusions: cluster VII is suitable for breeding of colored rice; cross breeding among clusters I, II, and VII has a high yield potential; and it is possible to produce a superior color by cross breeding plants from cluster V and VI.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.55 no.1
• /
• pp.83-90
• /
• 2010

Crop characteristics of 179 sorghum (Sorghum bicolor L. Moench) resources collected in Korea were investigated in order to establish basic data for the improvement of crop breeding. Spike types of 179 sorghum resources were classified as 5 types of open-loose type, broom-tillering type, half broom-tillering type, extreme-compact type and compact type, of which broom-tillering type was the highest ratio of 38.0% (68 plant resources) of 179 germplasm. In the existence and nonexistence of spike awn in 179 sorghum resources, 28.5% (51 plant resources) showed existence of spike awn, whereas the rest of 71.5% (128 plant resources) had no spike awn. Seed type was classified as 5 types, of which circle-shape showed the highest ratio of 43.0% (77 plant resources) and the lowest was inclined-circle shape by 7.3% (13 plant resources). Seed color was classified as 4 colors of brown, white, whitish brown, and yellowish brown, of which yellowish brown was the highest ratio of 84.4% (151 plant resources) among them. Days from seeding to heading date showed the range from 67 to 88 days with the average of 77.4 days and the highest frequency proportion of it was the group from 76 to 80 days, which occupied 37.4% (67 plant resources) of 179 germplasm. 179 sorghum resources showed high variation in the range of culm length with the average of 253.8 cm and group from 92 cm to 360 cm of culm length showed the highest frequency proportion of 20.6% (37 plant resources). Spike length showed the range from 15 to 49 cm with the average of 28.8 cm and the highest frequency distribution of it was the group from 31 to 35 cm with the proportion of 26.3% (47 plant resources), whereas the lowest was below 15 cm with the proportion of 0.6%. Days from seeding to physiological maturity showed the range from 110 to 146 days with the average of 125.5 days and the highest frequency proportion (39.7%) of it was the group from 111 to 115 days, while there were also occupied with 2 plant resources below 110 days and 23 plant resources over 141 days among 179 germplasm. Number of grains per spike showed the range from 163 to 4,532 grains with the average of 2,068.6 grains and group from 1,601 to 2,000 grains per spike was the highest frequency distribution with the proportion of 25.7% (46 plant resources). 1000 grains weight showed the range from 10.6 to 38.1g with the average of 25.6g and group from 26.0 to 30.0g was the highest frequency distribution with the proportion of 44.1% (79 plant resources).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.4
• /
• pp.394-400
• /
• 2008

Crop characteristics of 137 common millet (Panicum miliaceum L.) resources collected in Korea were investigated in order to establish basic data for the improvement of crop breeding. Spike types of 137 plant resources were classified as 4 types of oblate, spreading, oblate-compact (intermediary type between oblate and compact) and oblate-spreading (intermediary type between oblate and compact) type, of which oblate spike type was the highest percentage of 66.4% (91 plant resources) of 137 germplasm. Seed color was classified as 5 colors of dark brown, yellow, brown, yellowish brown, and yellowish white, of which yellowish white was the highest percentage of 66.4% (54 plant resources) among them. Seed type was classified as 2 types of pyramid shape and short pyramid shape, which showed 62.8% and 37.2% respectively. Days from seeding to heading date showed the range from 68 to 85 days with 73.7 days in the average and the highest frequency proportion of it was the group from 70 to 75 days, which occupied 46.7% (64 plant resources) of 137 germplasm. Days from seeding to physiological maturity showed the range from 109 to 124 days with 112.0 days in the average and the highest frequency proportion (60.6%) of it was the group from 111 to 115 days, while there were also occupied with 6.6% below 110 days and 5.1% over 120 days among 137 germplasm. Group from 181 cm to 190 cm of culm length showed the highest frequency proportion of 47.4%, whereas below 160 cm was the lowest occupancy of 2.9%. Spike length showed the range from 181 to 190 cm with 181.4 cm in the average and the highest frequency distribution of it was the group from 31 to 35 cm with the proportion of 54.0%. Number of grains per spike showed the range from 432 to 2,665 grains with 1,429.5 grains in the average and group from 1,200 to 1,400 grains per spike was the highest frequency distribution with the proportion of 20.4%. There were also occupied with 13.1% below 1,000 grains and 8.6% over 2,000 grains per spike among 137 germplasm.

• Journal of Distribution Research
• /
• v.5 no.2
• /
• pp.49-68
• /
• 2001

In this chapter, we summarize the results on the optimal location selection and present limitation and direction of research. In order to reach the objective, this study selected and tested the interaction model which obtains the value of co-ordinates on location selection through the optimization technique. This study used the original variables in the model, but the results indicated that there is difference in reality. In order to overcome this difference, this study peformed market survey and found the new variables (first data such as price, quality and assortment of goods, and the second data such as aggregate area, and area of shop, and the number of cars in the parking lot). Then this study determined an optimal variable by empirical analysis which compares an actual value of market share in 1988 with the market share yielded in the model. However, this study found the market share in each variables does not reflect a reality due to an assumption of λ-value in the model. In order to improve this, this study performed a sensitivity analysis which adds the λ value from 1.0 to 2.9 marginally. The analyzed result indicated the highest significance with the market share ratio in 1998 at λ of 1.0. Applying the weighted value to a variable from each of the first data and second data yielded the results that more variables from the first data coincided with the realistic rank on sales. Although this study have some limits and improvements, if a marketer uses this extended model, more significant results will be produced.

• Journal of Technology Innovation
• /
• v.24 no.4
• /
• pp.277-307
• /
• 2016

Since 2011, DCF(Discounted Cash Flow) method has been used initiatively for valuating R&D technology assets in the agricultural food industry and recently technology valuation based on royalties comparison among technology transfer transactions has been also carried out in parallel when evaluating the technology assets such as new seed development technologies. Since the DCF method which has been known until now has many input variables to be estimated, sophisticated estimation has been demanded at the time of technology valuation. In addition, considering more similar trading cases when applying sales transaction comparison or industry norm method based on information of technology transfer royalty, it is an important issue that should be taken into account in the same way in the Agri-Food industry. The main input variables used for technology valuation in the Agri-Food industry are life cycle of technology asset, the financial information related to the Agri-Food industry, discount rate, and technology contribution rate. The latest infrastructure building and data updating related to technology valuation has been carried out on a regular basis in the evaluation organization of the Agri-Food segment. This study verifies the key variables that give the most important impact on the results for the existing technology valuation in the Agri-Food industry and clarifies the difference between the existing valuation result and the outcome by referring the support information that is derived through the latest input information applied in DCF method. In addition, while presenting the scheme to complement fragment information which the latest input data just influence result of technology valuation, we tried to perform comparative analysis between the existing valuation results and the evaluated outcome after the latest of reference data for making a decision the input values to be estimated in DCF. To perform these analyzes, it was first selected the representative cases evaluated past in the Agri-Food industry, applied a sensitivity analysis for input variables based on these selected cases, and then executed a simulation analysis utilizing the key input variables derived from sensitivity analysis. The results of this study is to provide the information which there are the need for modernization of the data related to the input variables that are utilized during valuating technology assets in the Agri-Food sector and for building the infrastructure of the key input variables in DCF. Therefore it is expected to provide more fruitful information about the results of valuation.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.23 no.1
• /
• pp.34-40
• /
• 2009

After a research on appearance diagnosis and fish, bird, horse, and turtle types, this study concluded as following. Appearance diagnosis is a technique that exams five jang organs by color and shape of eye, nose, mouth, and ear. Four HyungSang types-including fish, bird, horse and turtle types-are evaluated upon the external shape that are created while type of seed changes. Appearance diagnosis focuses on five jang organs. Four HyungSang types focus on external shape, but are eventually related to five jang organs. Thus, two different techniques possess a point in common; five jang organs. The assignment of nose, eye, ear and mouth to the Five elements varies between two techniques. On the viewpoint of formation, appearance diagnosis assigns them to metal-water-wood-fire-earth and movement, and four HyungSang types do to wood-fire-earth-metal-water and constitution. On the viewpoint of body/use and static/dynamic, appearance diagnosis assigns them to metal-water-wood-fire-earth and constitution, and four HyungSang types do to wood-fire-earth-metal-water and movement. If nose, eye, ear, and mouth are assigned by on four HyungSang types, which are based on external shape, the assignment can be utilized in diagnosis. If, however, they are assigned by appearance diagnosis, it can be focus on treatment. Five jang organs and six fu organs are affected by internal conditions because they are located inside of human body, while four HyungSang types are affected by external conditions because it deals with external shape. If a disease occurs in the developed part of the body, it would be difficult to be cured because four HyungSang types depend on external shapes.