• 제목/요약/키워드: sediment scour

검색결과 47건 처리시간 0.03초

낙동강 취수보개체를 위한 이동상 수리모형실험 (The Movable Hydraulic Model Test for Exchange of Intake Weir in the Nakdong River)

  • 김성원
    • 한국환경과학회지
    • /
    • 제9권1호
    • /
    • pp.35-42
    • /
    • 2000
  • In this study, the movable bed model testing was carried out so as to analyze bed profile changes including predicting scouring and deposition of bed profile and to solve hydraulic problems affecting with bed and both-bank between upstream and downstream of intake weir in the Nakdong river channel. The movable bed model testing consists of fundamental test, movable model test and numerical analysis method respectively. The fundamental test was enforced to analyze relationship of discharge and sediment load in the tilting flume. When the movable model test was worked, it was shown that sediment budget between input sediment load and output sediment load was balanced exactly. As a result of movable model test, it was presented that scouring and deposition changes in quantities between the upstream and downstream of modification weir were less than those of nature and planning weir. Finally, numerical analysis method was operated by 1-dimensional bed profile changes model ; HEC-6 model so as to complement unsolving hard problems during movable model test. So, modification weir will sustained the stable bed profile changes than any other weirs in the study channel.

  • PDF

한국 남해안에 시설된 인공어초 주위의 퇴적과 세굴 특성 (Characteristics of accretion and scour around artificial reefs in the southern waters of Korea)

  • 김창길;서성호;오태건;김병균;최용석
    • 한국마린엔지니어링학회:학술대회논문집
    • /
    • 한국마린엔지니어링학회 2011년도 전기공동학술대회 논문집
    • /
    • pp.233-233
    • /
    • 2011
  • 동 연구는 한국 남해안에 시설된 인공어초 주위의 퇴적과 세굴의 특성을 기술한 것이다. 퇴적과 세굴 특성 조사는 2007년 4월에 137개가 시설된 사각형어초의 1단지에서 수행되었다. 사각형어초의 1개의 체적은 8 $m^3$ ($2{\times}2{\times}2$ m)이다. 조사된 사각형어초단지는 1999년 11월에 수심 21.6 m의 사니질에 시설하였다. 연구에 사용된 주요 장비는 Side Scan Sonar, Multi Beam Echo Sounder, Sub-Bottom Profiler, Water Current meter 등 이다. 조사 결과, 인공어초는 중첩된 어초단지 높이의 2-3배인 약 4m 높이로 시설되어 있었고, Side Scan Sonar에 의해 조사된 어초의 형상은 타원형이었다. 인공어초 주위의 최대 유속은 간조시 81.5 cm/sec였으며, 창조시는 72.7 cm/sec 였다. 인공어초 주위의 세굴은 조상(潮上)측에서, 그리고 퇴적은 조하측의 체류역에서 형성되었다. 인공어초 주위의 퇴적은 2.4 - 3.0 m 범위였으며, 퇴적의 가장 높은 봉우리는 어초로부터 10 m의 거리에서 형성되었다. 그리고 경사는 주 흐름에 대한 직각 방향에 있는 어초의 부근에서 가파르게 형성되었으며, 어초로부터 멀어짐에 따라 완만하게 형성되었다. 퇴적은 인공어초의 단지의 높이와 퇴적봉우리의 높이의 차가 적어짐에 따라 감소하였다. 퇴적 봉우리는 어초 높이의 약 1 m까지 퇴적된 후에 서서히 약화되었다. 한편, 세굴은 어초로부터의 용승류, 그리고 퇴적의 옆면에 흐르는 측류에 의해 계속적으로 야기되어 진다. 또한 세굴은 바닥을 파헤친 것이 아니라 퇴적된 부분에서 야기되어지며, 이것은 세굴의 깊이가 변하지 않는다는 것을 의미한다.

  • PDF

생태계 제어 시설물의 설계 및 배치 최적화(2) -흐름장에서의 인공어초의 침하 및 매몰 특성- (Structural and Layout Design Optimization of Ecosystem Control Structures (2) -Characteristics of Subsidence and Burial of Artificial Habitat due to Sediment Transport in Flow Field-)

  • 류청로;김현주;이한수;신동일
    • 한국수산과학회지
    • /
    • 제30권1호
    • /
    • pp.139-147
    • /
    • 1997
  • Sediment transport around artificial habitat which is induced by the change ol flow due to installation of the structure plays a role not only as a defect function of subsidence and burial but also bottom-environment control function. This study examined the characteristics of local scouring and deposition with sediment sizes, current velocities and installation direction of artificial habitat in flow field. Resultant subsidence and burial processes are investigated and discussed with Reynolds number. Together with sediment number and dimensionless time elapse, prediction formulas are established by combining these relationships. Bottom control function as cultivating effects is discussed with installation direction, and applicability of countermeasures is compared and stone pavement method is recommended.

  • PDF

수리실험을 통한 보 연결부 제방 세굴 특성 분석 (Experimental Analysis for Characteristics of Bank-Scour around Barrier)

  • 정석일;이승오
    • 한국안전학회지
    • /
    • 제32권4호
    • /
    • pp.34-39
    • /
    • 2017
  • Typical flow regime of overflow at barrier or weir constructed in mid and small streams becomes as the submerged flow during most flood events. One of major causes of barrier failure has been reported as the levee-scour near the conjuction node between barrier and levee. However, most related design guidelines in Korea have not mentioned about the protection of levee around barrier or weir in detail. Furthermore, most previous researches have focused on the flow characteristics of overflow around several types of weirs but they did not have considered the material properties of levee itself. In this study, local scour near barrier was investigated with different material properties of levee under the submerged overflow condition which is assumed to reenact a flood event. Based on results from Fritz et al. and Mavis et al., a theoretical formula was also proposed in initial stage of laboratory experiments. And hydraulic experiments were carried out for the verification of the proposed formula. Levee was installed in the prismetic trapezoidal open channel and most parts were made of concrete except for movable section in which scour was expected to occur for the efficiency of experimental procedure. Each compaction of movable section in levee was followed by the basis of the KS F 2312. Further, after performing the experiments to find the optimum water content for each sediment, the specific amount of water was injected before flowing water. The difference between the proposed theoretical formula and experiment results was not much but considerable, which might be caused by the effect of compaction. For theoretical approach, it seemed that the formula did not take into account the compaction of levee, thus the correction coefficient for levee compaction determined in the literature was considered. Finally, the formula for the length of scour around barrier or weir was proposed, which can be useful to predict a levee in the reference design of revetment in mid and small streams. As shortly future study, scour length of levee around barrier or weir under different flow conditions such as perfect overflow condition will be studied and it will be able to contribute to suggest the design formula or criteria under all overflow conditions near barrier or weir.

낙동강 강정고령보 상류 퇴적물 측정망 지점의 중금속 오염도 및 대표성 평가 (Evaluating Sediment Heavy Metal Pollution Level and Monitoring Network Representativeness at the Upstream Points of the Gangjeong-Goryeong Weir in the Nakdong River)

  • 안정민;임태효;김성민;이상수;김신;이권철;김용석;양득석
    • 한국환경과학회지
    • /
    • 제27권7호
    • /
    • pp.477-488
    • /
    • 2018
  • In this study, heavy metal levels at the sediment monitoring network site upstream of the Gangjeong-Goryeong weir in the Nakdong River were surveyed from 2012 to 2016. We assessed the sediment pollution level using various pollution indexes based on ICP-MS analysis. The stream sediment pollution assessment standard, established through Regulation No. 687 of the National Institute of Environmental Research (2015), pollution load index (PLI), potential ecological risk index (RI), and mean PEL Quotient (mPELQ) were used to evaluate the sediment pollution level. We verified the representativeness of the monitoring point through the distribution of sedimentation and scour behavior by river bed surveying using anacousticDopplercurrentprofiler.

Response of estuary flow and sediment transport according to different estuarine dam locations and freshwater discharge intervals

  • Steven Figueroa;Minwoo Son
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2023년도 학술발표회
    • /
    • pp.519-519
    • /
    • 2023
  • Estuarine dams are a recent and global phenomenon. While estuarine dams can provide the benefit of improved freshwater resources, they can also alter estuarine processes. Due to the wide range of estuarine types and estuarine dam configurations, the effect of estuarine dams on estuaries is not well understood in general. To develop a systematic understanding of the effect of estuarine dam location and freshwater discharge interval on a range of estuarine types (strongly stratified, partially mixed, periodically stratified, and well-mixed), this study used a coupled hydrodynamic-sediment dynamic numerical model (COAWST) and compared flow, sediment transport, and morphological conditions in the pre- and post-dam estuaries. For each estuarine type, scenarios with dam locations at 20, 55 and 90 km from the mouth and discharge intervals of a discharge every 0.5, 3, and 7 days were investigated. The results were analyzed in terms of change in tide, river discharge, estuarine classification, and sediment flux mechanism. The estuarine dam location primarily affected the tide-dominated estuaries, and the resonance length was an important length scale affecting the tidal currents and Stokes return flow. When the location was less than the resonance length, the tidal currents and Stokes return flow were most reduced due to the loss of tidal prism, the dead-end channel, and the shift from mixed to standing tides. The discharge interval primarily affected the river-dominated estuaries, and the tidal cycle period was an important time scale. When the interval was greater than the tidal cycle period, notable seaward discharge pulses and freshwater fronts occurred. Dams located near the mouth with large discharge interval differed the most from their pre-dam condition based on the estuarine classification. Greater discharge intervals, associated with large discharge magnitudes, resulted in scour and seaward sediment flux in the river-dominated estuaries, and the dam located near the resonance length resulted in the greatest landward tidal pumping sediment flux and deposition in the tide-dominated estuaries.

  • PDF

인공리프의 설치조건에 따른 표사이동 특성 연구 (A Study on Topography Change due to Setup Condition of Artificial Reef)

  • 심규태;김규한
    • 한국해안·해양공학회논문집
    • /
    • 제29권3호
    • /
    • pp.154-161
    • /
    • 2017
  • 본 연구에서는 침식성 파랑의 내습조건에 대해 인공리프의 길이(Lr), 개구폭(W), 개구부 수의 변화가 인공리프 주변 지형에 미치는 영향을 검토하고자 하였다. 구조물 주변에서의 표사이동 양상은 이동상실험을 통하여 검토하였으며 인공리프의 설치조건과 발생 유속 및 파랑변형, 지형변동과의 관계에 대해 고찰하였다. 실험결과 인공리프의 설치로 인하여 배후 침식량은 감소하였으나 개구부내에서의 세굴은 복수의 개구부를 갖는 구조에 비하여 단일 개구부를 갖는 조건에서 증가되었으며, Lr/W의 변화와 깊은 연관성을 보이는 것으로 확인되었다.

인공어초 주변의 흐름장에 관한 수치해석 (Numerical Analysis of the Flow Field around Artificial Reefs)

  • 정칠훈;김헌태
    • 한국수산과학회지
    • /
    • 제40권1호
    • /
    • pp.31-38
    • /
    • 2007
  • This study investigated the fluid force acting on an artificial reef and the scour pattern at the bottom of the artificial reef in a steady-flow field using the finite difference method (Flow-3D). The structure was tetragonal in shape, like similar objects found in nature. The numerical analysis showed that the hydrodynamic characteristics and incipient scouring pattern matched natural phenomena. The velocity distribution around the tetragon was symmetric and wake occurred inside the tetragon and behind the bottom of the tetragon. The length of the recirculation flow behind the tetragon for each velocity was about 4-5 cm and the magnitude of the recirculation flow inside the tetragon generally increased with the Reynolds' number, although it decreased slightly for Reynolds' numbers from 11,000 to 12,000. In addition, the total fluid force acting on the tetragon increased with the inflow velocity, although the increment was smaller when the velocity exceed 18 cm/sec. The incipient pattern for the scouring of sediment matched the natural phenomenon.

하천 합류점의 하도형상에 관한 수로실험 (Flume Experiments on Channel Morphology at a Tributary Junction)

  • Taeho Kim
    • 대한지리학회지
    • /
    • 제33권3호
    • /
    • pp.355-364
    • /
    • 1998
  • 하천 합류점의 하노형상을 파악하고 하도형상에 영향을 미치는 요소를 조사하기 위해 소형 수로실험을 실시했다. 합류하는 두 수류리 모삔트가 동일하면 할류후 하도는 합류각도를 이분하는 방향으로 늘어서기 때문에 초기하도의 배열에 따라 하도의 측방이동이 일어난다. 그 결과 합류후 하도의 형상은 합류의 평면형태 즉 대칭형, 점이형. 비대칭형에 따라 달라진다. 합류에 기인하는 가장 특징적인 하도혈상으로 하상 세굴부를 들 수 있다. 급경사의 양벽으로 둘러싸인 합류점의 세굴부는 기본적으로 합류각도에 의해 지배된다. 하천합류는 전통적으로 협화적이라고 표현되어 왔지만 불협화적 합류도 빈번하게 발생한다. 합류의 불협화에는 합류하천의 유량비뿐만 아니라 유사농도비도 관여한다. 따라서 불협화를 일으키는 최대요소로는 두 비를 고려한 수면폭당 단위유량비를 들 수 있다.

  • PDF

배사구 유입부 흐름 및 하상변동 수치모의를 위한 매개변수 검정 및 민감도 분석에 관한 연구 (Parameter Calibration and Sensitivity Analysis for Numerical Modeling of Flow and Bed Changes near the Opening Gate for Sediment Release)

  • 장은경;임종철;지운;여운광
    • 한국환경과학회지
    • /
    • 제20권9호
    • /
    • pp.1151-1163
    • /
    • 2011
  • The bed change analysis near the opening gate of a dam or weir to release deposited sediments have been conducted mostly using the numerical models. However, the use of unverified input parameters in the numerical model is able to produce the different results with natural and real conditions. Also, the bed changes near the opening gate of a dam or weir calculated with a numerical model could be varied depending on the geometry extent included the downstream area with supercritical flow in the model. In addition, the different time steps could provide different results in the bed change calculation, even though other conditions such as input parameters, geometries, and total simulation time were same. Therefore, in this study, hydraulic experiments were performed to validate the eddy viscosity coefficient which is the one of important input parameters in the RMA2 model and relevant to variation of simulation results. The bed changes were calculated using the SED2D model based on flow results calculated in the RMA2 model with the verified and selected eddy viscosity coefficient and also compared with experimental results. The bed changes near the opening gate were underestimated in the numerical model comparing with experimental results except only the numerical case without the modeling section of sediment release pipe and downstream area where the supercritical flow was produced. For the simulation of minimum time steps, different shapes of scour hole were produced in numerical and physical modeling.