• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.4047-4054
• /
• 2010

We studied the release characteristics of the marine sediment which could facilitate sea eutrophication through some lab-scale simulation experiments. Environmental indicators such as pH, ORP(oxidation reduction potential), nitrogens, and phosphates were measured in order to calculate the corresponding release rates. $CaO_2$, an oxygen releasing compound was used to determine how it would effect on the natural process of sedimental release. COD, ammonia nitrogen, phosphorous compounds were less released under the oxic environment caused by $CaO_2$. This basic data will help developing methodology for reducing marine eutrophication which may be initiated by the sedimental release.

• Korean Journal of Environmental Biology
• /
• v.25 no.3
• /
• pp.205-214
• /
• 2007

Marine environmental characteristics on the dinoflagellate cysts distribution in surface sediment of the southwest sea of Korea were investigated from 21 stations in September 2003, and 36 stations in June, 2004. The water mass characteristics indicated that the southwest sea of Korea is characterized by various oceanographic conditions due to coastal waters of Korea and China. The Tsushima warm currents and the cold bottom water of the Yellow Sea. Mud contents and chlorophyll a concentrations were higher in central region such as, Namhaedo, Yeosu and Goheung coast than in western region such as, Wando, Haenam and Jindo coast in the South Sea of Korea. A total of 35 taxa of dinoflagellate cysts were identified representing 21 genera, 33 species, 2 unidentified species. Cyst abundance ranged from 13 to 527 cysts $g-dry^{-1}$, showing higher abundance in the coastal areas than in western region of the South Sea of Korea. From the result of the PCA analysis, the distribution of dinoflagellate cysts was not only related to the different water masses which appeared in the southwestern sea but also to physical and biological parameters such as water temperature, light, surface sediment faces and phytoplankton biomass.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.161-166
• /
• 2004

Research for deposits in Nakdong eatuary that research about Nakdong eatuary's sediment flows out in Nakdong-kang so far had been progressed but research about deposits that is flowed in open sea is insufficient. Observed Nakdong eatuary's characteristic of sediment transfer through observation during the second during Buteo 20 days on February 6, 2004 in this research Resuspension bed load Flux appeared high the first result St.4 point and St.5 point. St.4 branch had much bed load amount that is flowed in the east, and bed load that St.5 branch is flowed in the south appeared much Tendency such as the first showed in the second result, but compare with the first result and St.5 branch had much bed load that is transfer in end. Bed load that is transfer in observation result Nakdong river was less. As this, can know that amount of sediment that is transfer in open sea more than deposits that is transfer in Nakdong river is much Is expected to exert effect that deposits that is transfer in open sea is high in Nakdong estuary's topography change. Specially, observation result is expected that Nakdong estuary's deposition tendency becomes Jinwoodo southern and Shinho southern.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.1B
• /
• pp.1-7
• /
• 2012

Quasi-two dimensional numerical model (GSTARS) was applied to determine the optimal sediment discharge formula for simulating the sedimentologic characteristics of Hyeongsan river. The field measurements have been conducted to obtain the data, such as sediment discharge, bed material, and channel geometry, for model calibration and verification. The sediment discharge formulas, which have been generally used, have been assessed according to the average error, relative error, RMSE, RRMSE, discrepancy ratio and Nash-Sutcliffe efficiency coefficient for bed changes along the thalweg. From the results, Laursen formula(1958) shows the best performance to simulate the long-term bed change of Hyeongsan river.

• Journal of Environmental Health Sciences
• /
• v.35 no.5
• /
• pp.376-385
• /
• 2009

The characteristics of Lake Cheonhoji water and sediment were investigated in oder to utilize these as fundamental materials for the management of lake water quality. The hydrographic properties of Lake Cheonhoji which are relatively low chance of nutrients loading from the watershed and a long retention time of lake water, lead to the probability of high lake productivity. It was also observed that lake water showed stratification during summer and complete mixing during fall, even though water depth was relatively shallow. The trophic state was eutrophic to hypertrophic from summer to late fall. The overall properties of the sediment were oligohumic, high ignition loss and high composition of NAIP and Resid.-P, which might serve as potential pollution sources of lake water quality. In laboratory scale experiments, it was observed that leaching potential of nutrients in the sediment was greatly dependant upon water temperature and dissolved oxygen. Finally, water pollution in Lake Cheonhoji was considered to be largely due to the adverse cycle of uncontrollable eutrophication, which resulted in the subsequent occurrence of dead algae and animal plankton, organic sedimentation, reduction of dissolved oxygen and nutrients leaching, which again reinforced the cycle of eutrophication in the lake.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.933-937
• /
• 2008

유사(sediment)란 지각의 풍화작용에 의해 생성되어 유수나 바람 등에 의해 침식, 이송, 퇴적된 물질을 말하며, 일반적으로 하천유사(fluvial sediment)를 말한다. 유사의 크기는 작게는 미세한 점토입자부터 크게는 자갈에 이르기까지 매우 다양하며, 하천에서의 소류사량과 부유사량을 포함한 총유사량의 추정은 하천유사 문제의 기본이며 하천내의 수리구조물의 설계 및 유지관리, 하천개수 및 하도의 안정, 홍수터 관리, 저수지의 설계 및 운영 등 수자원 개발 및 관리를 위한 하천계획에 필요한 기본적 요소 중 하나이다. 본 연구에서는 중소하천에서의 실측을 통한 유사산정을 위해 대상하천에서 각 유량에 따른 부유사를 채취하여 시료분석을 통한 결과와 대상하천의 수리특성을 분석하여 총유사량의 산정 및 분석을 하였다. 이를 위하여 대상하천에 대하여 알맞은 측정조사지점을 선정하여 15회에 걸쳐 현장측정을 시행하였으며, 현장 측정시 유량측정을 위한 수위 및 유속을 측정하였고, 부유사농도 및 부유사입도분석을 위한 시료를 채취하여 실내 실험시 SS분석 및 BW관 분석을 시행하였다. 대상하천의 현장실험 측정성과와 수리특성을 기초자료로 하여 각 회차에 걸친 총유사량의 산정을 하였으며, 총유사량의 산정은 총유사량 추정 방법들인 직접 실측에 의한 방법, 간접계산에 의한 방법, '실측+계산'에 의한 방법 중 신뢰도가 높으며 경제성이 높은 '실측+계산'에 의한 방법과 간접계산에 의한 방법을 사용하는 공식으로 산정하였다. 결과들의 비교와 대상하천의 수리특성들에 대한 연구를 통해 적정공식을 선정하고 공식의 선정 원인에 대한 연구를 시행하였다.

• Journal of the korean society of oceanography
• /
• v.37 no.3
• /
• pp.144-153
• /
• 2002

This is a review paper, assessing progress reported in a Special Issue (Prandle and Lane, 2000) of Coastal Engineering focusing on simulation of SPM in the North Sea, against issues over a diverse range of shelf seas and their coastal margins. The broad objectives of reproducing the characteristics of sediment fluxes off an open coast and relating these to tidal and wave forcing were achieved. However, accurate computation of these fluxes remains sensitive to largely empirical coefficients used in determining erosion and deposition rates. Bed roughness strongly influences both these coefficients and the associated near-bed current magnitudes (including wave impact thereon). Bed roughness can change significantly over a tidal cycle and dramatically over seasons or in the course of a major event. Accurate simulation of sediment fluxes on a day-to-day basis is constrained by dependency on the initial distribution of mobile sediments. The latter depends on rates and locations of original sources and the time history of preceding events. Remote sensing via aircraft could provide data for assimilation into such models to circumvent these constraints. The approaches described here can be readily applied to other coastal regions to indicate the likely distributions and pathways of known sediment sources. However quantitative simulations will require an associated observational programme. A subsequent stage is to understand the evolving balance between the forecasted sediment movement - the resulting morphological adjustments and thence modifications to the prevailing tidal current and wave regimes.

• Environmental Engineering Research
• /
• v.17 no.2
• /
• pp.77-82
• /
• 2012

The spatial variation of organic matter sources in tidal flat sediment of the Nanakita River estuary, involving Gamo lagoon on the north-east coast of Honshu Island, Japan, was examined using carbon stable isotopes and fatty acid biomarkers. The spatial variation of total organic carbon (TOC) contents and ${\delta}^{13}C$ values were highly variable in between the stations, such as sandy flat (1.3 mg/g, -21.0‰), sand-muddy flat (2.6 mg/g, -21.9‰), and muddy flat (24.9 mg/g, -25.9‰), respectively. Particularly, at the muddy flat, high TOC content and low ${\delta}^{13}C$ value of the sediments indicated that the surface sediment was composed largely of terrestrial organic matter. Whereas, at the sandy flat and sand-muddy flat, the high ratios of diatom and bacteria biomarkers indicated the high contribution of abundant microorganism along with marine organic matter in sediment composition. From these results, it considered that the amount and origin of transported sedimentary organic matter indicated different characteristics in this study stations.

• Journal of Environmental Science International
• /
• v.23 no.10
• /
• pp.1745-1753
• /
• 2014

Sediment microbial fuel cell (SMFC), equipped with Zn, Al, Cu, Fe or graphite felt (GF) anode and marine sediment, was performed. Graphite felt was used as a common cathode. SMFC was single chambered and did not use any redox mediator. The aim of this work was to find efficient anodic material. Oxidation reduction potential (ORP), cell voltage, current density, power density, pH and chemical oxygen demand (COD) were measured for SMFC's performance.. The order of maximum power density was $913mWm^{-2}$ for Zn, $646mWm^{-2}$ for Fe, $387.8mWm^{-2}$ for Cu, $266mWm^{-2}$ for Al, and $127mWm^{-2}$ for graphite felt (GF). The current density over voltage was found to be strongly correlated with metal electrodes, but the graphite felt electrode, in which relatively weaker electricity was observed because of its bio-oriented mechanism. Metal corrosion reactions and/or a complicated microbial electron transfer mechanism acting around the anodic compartment may facilitate to generate electricity. We presume that more sophisticated selection of anodic material can lead to better performance in SMFC.

• Journal of Korean Port Research
• /
• v.14 no.4
• /
• pp.451-461
• /
• 2000

The design and maintenance of navigation channel and water facilities of an harbor which is located at the mouth of river or at the estuary area are difficult due to the complexity of estuarial water and sediment circulation. Effects of deepening navigable waterways, of changing coastline configurations, or of discharging dredged material to the open sea are necessary to be investigated and predicted in terms of water quality and possible physical changes to the coastal environment. A borad analysis of the transport mechanism in the estuary area was made in terms of sediment property, falling velocity, concentration and flow characteristics. In order to simulate the transport processes, a two-dimensional finite element model is developed, which includes erosion, transport and deposition mechanism of suspended sediments. Galerkin’s weighted residual method is used to solve the transient convection-diffusion equation. The fluid domain is subdivided into a series of triangular elements in which a quadratic approximation is made for suspended sediment concentration. Model could deal with a continuous aggregation by stipulating the settling velocity of the flocs in each element. The model provides suspended sediment concentration, bed shear stress, erosion versus deposition rate and bed profile at the given time step.