• Proceedings of the KSR Conference
• /
• 1999.05a
• /
• pp.67-74
• /
• 1999

When high speed train meets sidewind, folwfields around the train is very complex. In this case, the force by sidewind has a bad effect on stability of train. We can observe that the flow separates, reattaches, and forms all unsteady vortex in the wake region behind tile structure. Such folwfield can be analyzed by $\kappa$-$\omega$ SST model, and we investigate the effect for various section shape of high speed train. So we acquire the result that as tile corner of train section is rounder, stability of train is better.

• Current Research on Agriculture and Life Sciences
• /
• v.6
• /
• pp.1-6
• /
• 1988

The experiment was conducted to study on the physiology of developing embryo and endosperm degradation during germination of Zea mays seeds treated with GA 20 and B-Nine 5000 ppm. Data obtained can be summerized as follows : 1. Swelling of seminal root increased the section of GA treatment more or less, on the other hand, the section of B-9 treatment inhibited slightly. 2. According to elapsing of seeding date, epithelial cell of Scutellum expansed in size, and the space of cell increased, that degree was enlarged as follows ; the section of GA, the section of Control, and the section of B-9. 3. According to the elapsing of seeding date, the formation of vascular organization embryo became clearer little by little, the lignification of vascular B-9 treatment section rather higher than the other section. 4. The degradation of Starch Grain is composed of near part of epithelial cell of Scutellum, the shape of degradation radiate from element of a disk shape, and the speed of degradation is the section of GA, the section of Control, the section of B-9 in turn.

• Journal of Powder Materials
• /
• v.2 no.2
• /
• pp.135-141
• /
• 1995

As the first step of study on fabrication of ceramic powders from phytoliths in rice, especially in rice husks, pulverization method of rice husks and the properties of milled rice husks were investigated. Impact methods, such as ball milling, were not meaningful for pulverizing elastic and thin fabric structure of rice husks. The most effective one was cutting method. In the present work, a rotating knife cutting method was applied to pulverizing rice husks. A 40-mesh screen was inserted under the rotating knives. The most portion of the milled powder was found in -50/+100 mesh section. Morphology of the milled rice husks revealed that the husks larger than 70 mesh were flake-like shape, at -70/+100 mesh section relatively equi-axed shape, at -170/+325 mesh section rod-like shape, and below 325 mesh section dust-like shape. Tap density of raw rice husks was about 0.1 $g/cm^3$, while those of milled rice husks were over $0.4 g/cm^3$. This meant that, for a given volume of reactor, raw material charge can be increased more that 4 times when using milled rice husks than unmilled one. True densities of unmilled and milled rice husks were higher than $1.4 g/cm^3$, and increased with decreasing milled sizes.

• Fashion & Textile Research Journal
• /
• v.17 no.2
• /
• pp.265-277
• /
• 2015

The aim of this study was to successfully reflect human body changes on the transformation of the virtual body within 3D virtual fitting spaces. For this purpose, existing problems of shape transformation of the virtual body were analyzed and regression equations which provides useful basic data for transformation of the virtual body that can be applied usefully to the 3D virtual fitting system was developed. Necessary data for the analyses were body measurement and 3D scan data of women with average physical form between the ages of 40 through 49. The reason that we used human body changes of the female subjects in their forties was based on the recognition that fundamental female body changes start to occur from age of forty. Body shapes were largely divided into 3 groups according to obesity which was found to be the biggest factor of shape change. Seven factors were extracted based on factor analysis of 47 body measurement categories and regression equations were created to extract specific measurements for each BMI group based on these seven factors. The major contribution of this paper can be summarized as follows. First, the regression equations to extract specific measurements based on the 7 representative variables remediated existing problem of virtual bodies as it increased the number of body shape transformation areas. Second, the regression equations helped to overcome the problem of current failing to reflecting changes in body cross-section shape based on simple girth measurements based on analysis of cross-section distances.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.2
• /
• pp.169-175
• /
• 2004

In this paper, the stability of cantilever composite laminated structures with open channel section is studied. This paper deals with the buckling behavior under the variation of the geometrical shape (length ratio, crank angle in the open channel section), the fiber reinforced angle, and so on in order to offer a effective and reliable design data. Also, sensitive analyses are carried out on the stability by the interaction of design factors. Based on this fact, the proper channel section and lamination scheme of composite material cantilever structures are considered in the engineering aspect.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.9 no.2
• /
• pp.171-182
• /
• 2007

For minimizing the effect on the focus of civil traffic and environment conditions related to the excavation at the traffic jamming points, an underground station tunnel was planned with 35.5 m in length and bigger area than $200\;m^2$ in sedimentary rock mass. It faced the case that the overburden was just under 13 m. Not based on a pattern design but on the case histories of similar projects and arching effect, the design of large section tunnel under shallow overburden was investigated on three design subjects which are shape effect on the section area, application method of support pressure, and supporting and tunnel safety. According to the mechanical effect from section shape, a basic design and a preliminary design was obtained, and then supporting method of large section was planned by the supporting of NATM and a pipe roof method for subsidence prevention and mechanical stability. From the comparative study between both designs, it was found that the basic design was suitable and acceptable for the steel alignment of tunnel lining, safety and the design parameter restricted by the limit considered as partition of the excavation facilities. Through the analysis result of preliminary design showing the mechanical stability without stress concentration in tunnel arch level, it also was induced that shape effect of the large section area and yielding load obtained from deformation zone in the surrounding rock mass of tunnel have to be considered as major topics for the further development of design technique on the large section tunnel.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.985-988
• /
• 1997

In end milling process, the undeformed chip section area and cutting forces vary periodically with phase change of the tool. However the real undeformed chip section area deviates from the geometrically ideal one owing to cutter runout and tool shape error. In this study ,a method of estimating the real undeformed chip section area which reflects cutter runout and tool shape error was presented in up end milling process using measured cutting forces. Size effect was identified from the analysis of specific cutting resistance obtained by using the modified undeformed chip section area.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.764-771
• /
• 2006

The use of 3-D finite elements for the eigen analysis of beam-like structures with arbitrary section shape may not be practical in certain cases, from the aspect of CPU time. In this connection, this paper presents a systematic algorithm for decomposing an arbitrary section into finite number of basic ones and computing essential sectional quantities required for the eigen analysis using the beam theory. The numerical accuracy of the proposed method is assesed from the comparison with the 3-D finite . element method.

• Korean Journal of Computational Design and Engineering
• /
• v.14 no.4
• /
• pp.234-241
• /
• 2009

The use of aluminum parts in automobile structuraI applications has increased in an effort to reduce the weight of cars and hence improve fuel economy. But Aluminum bar, I-beam and channels need other processes to vary the cross section in the axial direction. Thus, applications of these parts are limited by high cost. If the cross section of the part is variable by using only extrusion, application of extruded bar, I-beam and channels will increase in the Aluminum industries. In this paper, we propose the variable-shape extrusion process which can control the thickness of Aluminum bar. And we can calculate the speed of center ram by varying the cross section in the extrusion to control the thickness of Aluminum bar.

• Transactions of Materials Processing
• /
• v.5 no.4
• /
• pp.281-287
• /
• 1996

Two kinds of blank shapes optimum and square are adopted to investigate formability. Optimum blank shape is determined to construct an L-shape cup with uniform height and without flange part. For this purpose rigid-plastic FEM analysis is applied with backward tracing technique. Maximum cup depth and strain distribution are measured experimentally for the products of the two kinds of blank shapes which are optimum and square. it is confirmed that deeper cup without severe thickness reduction can be obtained from the optimum shape.