• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.7
• /
• pp.584-587
• /
• 2017

In this paper, the radar cross section of the integrated mast module for battleship is analyzed. The computation program based on physical optics and physical theory of diffraction is developed and the computed results are compared with those of commercial simulator to check the accuracy of computations. The radar cross section is calculated in terms of the mast shape, incident angle, and polarization. The radar cross section can be reduced through the change of the mast slope and the chamfered mast, which can be applied to a mast with a low radar cross section.

• Journal of Korea Multimedia Society
• /
• v.5 no.3
• /
• pp.255-262
• /
• 2002

A boundary sequence can be a good representation of arbitrary shapes, because it can represent them simply and precisely. However, boundary sequences have not been used as a representation of arbitrary shapes, because the pixel-based shape-features such as area, centroid, orientation, projection and so forth, could not be computed directly from them. In this paper, we show that the shape-features can be easily computed from the boundary sequences by introducing the cross-sections that are defined as vertical (or horizontal) line segments in a shape. A cross-section generation method is proposed, which generates cross-sections of the shape efficiently by tracing the boundary sequence of the shape once. Furthermore, a boundary sequence extraction method is also proposed, which generates a boundary sequence for each shape in a binary image automatically The proposed methods work well even if a shape has holes. Eventually, we show that a boundary sequence can be used effectively for representing arbitrary shapes.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.6
• /
• pp.112-118
• /
• 2015

These days, there are lots of skyscrapers being constructed in downtown areas. However, it requires columns which have a way heavier load. and far more extensive cross sections of column as well. Therefore, it is hard to lay the foundation in downtown areas. This being the case, composite columns such as CFT column are primarily being used. However, CFT column is occurred of difficult beam-column connection development and lower performance since CFT column is closed cross-section. Especially, the result of the study concerning development of connection details with CFT column and exterior diaphragms are very low in current state. In this study, through developing CFT column-H shape steel beam applicating Y shape plate, set width and depth of Y shape plate which affect structural performance of connection details applicating Y shape plate as main variables, and evaluate structural performance through experiments. And also, design Y shape plate used at experiments as setting allowable stress for tension suggested at design criteria lower than axial force of tension side flange connected Y shape plate, through shape of destruction, verify the structural safety and performance of Y shape plate.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.04a
• /
• pp.123-130
• /
• 2002

A general formulation for shape design sensitivity analysis over three dimensional beam structure is developed based on a variational formulation of the beam in linear elasticity. Sensitivity formula is derived based on variational equations in cartesian coordinates using the material derivative concept and adjoint variable method for the displacement and Von-Mises stress functionals. Shape variation is considered for the beam shape in general 3-dimensional direction as well as for the orientation angle of the beam cross section. In the sensitivity expression, the end points evaluation at each beam segment is added to the integral formula, which are summed over the entire structure. The sensitivity formula can be evaluated with generality and ease even by employing piecewise linear design velocity field despite the bending model is fourth order differential equation. For the numerical implementation, commercial software ANSYS is used as analysis tool for the primal and adjoint analysis. Once the design variable set is defined using ANSYS language, shape and orientation variation vector at each node is generated by making finite difference to the shape with respect to each design parameter, and is used for the computation of sensitivity formula. Several numerical examples are taken to show the advantage of the method, in which the accuracy of the sensitivity is evaluated. The results are found excellent even by employing a simple linear function for the design velocity evaluation. Shape optimization is carried out for the geometric design of an archgrid and tilted bridge, which is to minimize maximum stress over the structure while maintaining constant weight. In conclusion, the proposed formulation is a useful and easy tool in finding optimum shape in a variety of the spatial frame structures.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.2
• /
• pp.94-102
• /
• 2013

In this study, numerical modeling was performed to investigate influence of the apron shape on the discharge performance of the sluice for tidal power plant. The numerical modeling was carried out for comparison of the difference in the discharge coefficient when the apron width, slope, and the length of the horizontal section were different, without considering change in the shape of the sluice caisson itself. The modeling result showed that significant discrepancy in terms of the overall discharge performance appeared according to the apron geometry. In order to achieve maximum discharge performance of the sluice caisson, it is desirable to make the design by putting a space equivalent to the width of the sluice caisson on its both sides, by making the apron slope be 1:5, and by keeping length of the horizontal section to be 50 m that is corresponding to the streamwise length of the sluice caisson.

• Journal of the Korean Institute of Gas
• /
• v.18 no.6
• /
• pp.40-44
• /
• 2014

In this study, it is analyzed that a change in the shape of small propane containers made of STS304 when increasing of internal pressure. When internal pressure of a small propane container increased, bottom of end plate is convexly changed. This test is applied to a water bath pressure test to analyze the characteristics of the container. Water bath is able to analyze relationship between internal pressure and volume. In result, shape change section is confirmed because bottom of end plate is convexly changed. In addition, this section tend to decrease internal pressure because a volume increment increase out of proportion to pressure. The results of this study are expected to contribute to improving the safety of the pressure vessel, as well as various small propane container.

• Journal of the Korean Institute of Oriental Medical Informatics
• /
• v.15 no.2
• /
• pp.77-91
• /
• 2009

Flowery Knotweed Root is the dried tuberous root of the knotweed family wheres Auriculate Swallowwort Root is the dried tuberous root of the swallowort family. Flowery Knotweed Root is also called Red Flowery Knotweed Root in China, which is dried root of Polygonum multiflorum THUMB. Chinese Flowery Knotweed Root is better known as the dried tuberous root belonging to the family Apocynaceae whereas White Flowery Knotweed Root in Korea is the dried tuberous root of Cynanchum wilfordii(Maxim) Hemsl. Up to now, while the dried root named Red Flowery Knotweed Root has been widely used in China, Auriculate Swallowwort Root has been widely used in Korea. Both the roots contrast in a striking way with the origin, shape, botanical names, other names, and chemical constituents, so administration and dosage without discrimination of both sides can be open to question. According to the literature, it is recorded that Flowery Knotweed Root and Auriculate Swallowwort Root are similar to the characteristics, properties, and actions. From this study, the result is as follows: 1. Flowery Knotweed Root and Auriculate Swallowwort Root are divided into the family Apocynaceae and the family Polygonaceae, respectively. Accordingly 2. Flowery Knotweed Root is in shape of an irregular spindle and looks reddish- brown or deep reddish-brown and the section is light yellowish-brown, while Auriculate Swallowwort Root looks yellowish-brown and the section is white or yellow. 3. Flowery Knotweed Root is reported by the Journal of the Crude Drug that the medicinals have not the same therapeutic action as Auriculate Swallowwort Root. It is recorded that the properties, channel entry, functions of Flowery Knotweed Root and Auriculate Swallowwort Root in literature have much in common. Many works on the roots of this plant has been used traditionally as a tonic are required of. In view of the results, Flowery Knotweed Root and Auriculate Swallowwort Root varies both in nature and in shape, so that the administration and dosage of the medicinals must be taken a prudent attitude.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.6
• /
• pp.591-598
• /
• 2011

When a vehicle passes through a turnout, it is necessary for the changes in lateral force to be minimized to ensure the safe running of the vehicle. Therefore, the analysis of the interaction between the vehicle and the turnout is crucial for estimating the lateral force and the derailment coefficient on the turnout. In this paper, the effect of the variation of section shape on the running safety of a vehicle was investigated by changing the shape of the point part and the crossing part. The tongue rail length of the point part and nose rail height of the crossing part of an F10/F12 turnout were changed, and the running safety of the vehicle was analyzed.

• Journal of Forest and Environmental Science
• /
• v.13 no.1
• /
• pp.81-89
• /
• 1997

Urban river needs continuous observation for the river conservation because river surrounding environment sensitivly is changed by human activity. In order to grasp the effect of human activity against Taebaek river in Chunchon city, this research analysed the channel shape change, fluctuation volume and bias degree over five times, for June, 1993 to June, 1996. The results were as follows : 1. The change of channel shape on each surveying time mainly occurred in June, 1996 and maximum deposition. $1,247m^3$ occurred on 19~20 section, maximum scouring, $340m^3$ occurred on 6~7 section, 2. When comparing with June, 1993, increased deposition volume of channelbed was about $4,600m^3$ in June, 1996, 3. The bias degree of channel mainly occurred in June, 1996 of surveying times and at 6, 7, 15, 16, 17, 18, 19, 20 line of surveying lines.

• The Research Journal of the Costume Culture
• /
• v.23 no.2
• /
• pp.242-253
• /
• 2015

The aim of this study was to use a 3D human body scanner to analyze the cross section of different body parts when a girdle is worn. Two types of girdles were selected as experimental garments: a standard type girdle (Garment A) and a high-waist type girdle (Garment B). Their sizes were 88 (S) and 94 (M). Ten female subjects in their twenties who wear girdles sizes 88 (S) and 94 (M) participated the experiment. Their bodies were scanned three times with the 3D human body scanner, before and after wearing experimental girdles. The data were collected by overlapping the cross sections of the 3D scanned body shape data. The space length was measured from the overlapped cross sections. The results show that human body silhouette are changed after wearing the compression type garments and the amount and place of the body change is different by style of garments. First, the waist girth shape became rounder. Second, there was a definite difference in space amount at abdomen girth between two types of girdle. The abdomen area was pushed toward the front after wearing the standard type girdle (A). The high-waist type girdle (B) pushed abdomen area toward the back. Third, there was clear difference at the hip area after wearing two types of girdle. The hip area pushed toward the front with the standard type girdle (A) and pushed toward the back with the high-waist type girdle (B).