• Journal of the Korean Home Economics Association
• /
• v.46 no.1
• /
• pp.25-37
• /
• 2008

The aim of this study was to provide basic materials that would enable students who take courses in the subjects of technology and home economics to take the knowledge and technological skills they learn in the classroom and apply them to real life situations and to nurture their thinking power and creativity. To achieve these research objectives, a survey was conducted on 217 home economics teachers at 129 schools in the metropolitan area in order to assess their classroom operations and the adequacy of the curriculum regarding "clothes-making and reuse." The results showed that most of the schools surveyed have only one classroom for home economics and that a majority of them are cooking rooms. The most preferred place to practice making clothes was found to be the classroom. In addition, the use of teaching aids pertaining to clothes-making are lacking or in poor shape. Furthermore, analysis of the curriculum regarding "clothes-making and reuse" showed that most of the students use kits that contain materials for making clothes, due to a lack of practice hours. Most teachers thought that this section was appropriate for the school curriculum. In the more detailed categories, the students' ability to use sewing machines was the lowest, while the ability to sew by hand was selected as the most useful and most appropriate for real life situations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.459-467
• /
• 2016

Recently, new open-cut modular construction method, which is built within a 5~7m depth below the road, was proposed for the near-surface transit system to ensure the economic feasibility of underground structures. In this paper, the precast modular construction method was developed for the low-cost and rapid construction of underground structures. For the experiment on the flexural performance of the modular slab connections, a total of eleven specimens were fabricated according to the test variables; section shape, joint type, lap length, and transverse reinforcement. The test results were compared with those of the specimens without loop joints. To verify the performance of the slab connections, the 4-point loading tests of precast RC members with loop joints were conducted. As a result of the test, the flexural performance of the half-depth specimens with a 200mm lap length of loop joints were confirmed to be similar to those of the specimens without joints.

• The Journal of Engineering Geology
• /
• v.18 no.2
• /
• pp.197-205
• /
• 2008

Total displacement under non-reinforcement is a quantitative index of rock mass behavior during tunnel excavation and depends widely upon geological characteristics. The primary purpose of this study is to suggest a rock mass evaluation method, well representing tunnel behavior during excavation, according to rock type. A 3-D numerical analysis was carried out, with consideration of the shape of tunnel section, excavation condition and so forth, in a sedimentary rock-based tunnel, and total displacements under non-reinforcement according to rock mass class were calculated. Finally, quantification analysis was carried out to assess correlation of the total displacement with RMR parameters. As the result, a modified RMR system fer quantification of rock mass behavior during tunnel excavation is suggested.

• Applied Biological Chemistry
• /
• v.39 no.5
• /
• pp.379-383
• /
• 1996

The ultrastructure of the compound starch granules and the protein bodies of Odaebyeo rice of early matured variety were examined by light microscope and electron microscope. The endosperm cell appealed rectangular or octangular shape on the cross section. The thickness of cell wall containing of membraneous materials was about $0.5\;{\mu}m$ in diameter. The starch cell was filled compactly with globular or oval shaped compound starch granules with the size of $20{\sim}25\;{\mu}m$ in diameter. The compound starch granules were consisted of central core starch granule and concentrical $2{\sim}3$ layers of starch granules. The average thickness of the starch granules were about $5\;{\mu}m$. Most protein bodies were found in the aleurone layer The globular protin bodies were scattered near the compound starch granules and $2.5{\sim}3\;{\mu}m$ in diameter. The protein bodies composed of central electron dense materials and peripheral electron loose materials in limiting membrane.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.62 no.6
• /
• pp.111-118
• /
• 2020

This study developed a rainwater harvesting system for the irrigation of upland on sloping area. The assessment of water supply capacity was evaluated in farm field experience. This system consists of a water catchment device and a collapsible storage tank. The water catchment device was designed to collect runoff water in natural channel of 500 mm width into a pipe of 50 mm inner diameter. The device has funnel-shaped plan and cross-section of square. The storage capacity of the collapsible water tank was caculated to meet the water demand for irrigation in 30 a cultivated land for 10-year frequancy drought. The tank has a cuboid shape with a capacity of 30 ㎥, 5 m in width and length, 1.2 m in height. This system can supply 92% of the water required for drop irrigation of red pepper and 88% of the water required for drop irrigation of onions in 30 a cultivation land during the month of May and June. In the case of 16-dry days of 10-years frequency, this system is capable to irrigate 100% of required water for red pepper and onion, 76.7% of required water for Omija (Schisandra chinensis), and 51.5% of required water for autumn kimchi cabbage.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1581-1588
• /
• 2011

In this study, flow characteristics in a multi-cavity injection molding process were investigated. One of main problems occurred in the multi-cavity molding is a flow imbalance among cavities since it affects physical properties and quality of products. Charge imbalance is caused by the uneven shear stress. Therefore, changes in viscosity affect the physical properties of resin and injection conditions differ in the filling imbalance phenomenon. Through, this study focus on experimental studies of flow imbalance for PC and PP resin occurring in a balanced delivery system. Experimental results were compared with CAE results. By experimental and CAE analysis, main cause for the flow imbalance is temperature distribution in cross section of runner. New runner system with a simple change of runner shape was suggested to avoid the flow imbalance. A series of simulation to confirm feasibility of Volume Runner's effects was conducted using injection molding CAE.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.1170-1175
• /
• 2014

The purpose of this study is to improve the interoperability of IFC for the basic data such as the size of member section, length, thickness, reference location, and eccentricity of the structural members. For this, the method to represent the basic data of structural member is proposed. In the proposed method, the most important criteria is the way that engineers recognize and treat the basic data of structural members. Then, in this study, an IFC file is generated based on the proposed method for a simple RC building composed of members and it is examined that the correct basic data can be derived from the IFC file in the way that engineers do in practice. From the results of the examination, the proposed method is expected to improve the interoperability of IFC for the basic data.

• Journal of the Korean Institute of Gas
• /
• v.21 no.1
• /
• pp.18-26
• /
• 2017

This work proposes an alternative pipe wall-thinning inspection method based on change of eigenfrequencies of shell vibration modes in wall-thinned pipes. It takes much time to detect wall-thinning of pipes using ultrasonic thickness gauge and only a limited number of pipes are under regular inspection. In a pipe with locally decreased thickness, stiffness varies along circumferential direction and natural frequencies of shell vibration modes of the pipe change or frequencies of same modes bifurcate into two different values. Therefore, one can monitor pipe wall-thinning by measuring change of natural frequencies or estimate wall-thinning shape qualitatively. The feasibility of the proposed method was studied by FE vibration analysis for wall-thinned pipes. Modal testing was also carried out for the pipes with artificial wall-thinned section to verify the working performance of the suggested technique.

• Polymer(Korea)
• /
• v.37 no.6
• /
• pp.677-684
• /
• 2013

Zinc alginate films were prepared by a film maker from sodium alginate solutions of different weight ratios and then they solidified into 3 wt% content $ZnCl_2$ coagulation solution and washed and dried at a $60^{\circ}C$ oven for 20 min. The characteristics were measured by several methods (antimicrobial activity, viscosity, FTIR, TGA, SEM, EDS, contact angle, tensile strength and solubility) and the film properties were investigated. The antimicrobial test showed that the zinc alginate films result in excellent antimicrobial activity in the two strains (Klebsiella pneumonia, Staphylococcus). The surface of zinc alginate film from the solution of 9 wt% sodium alginate showed more uniform shape than any other films and the cross-section were hard and rough when the films were well-solidified by the $ZnCl_2$ solution. The tensile strength of zinc alginate films increased along with the concentration of sodium alginate solution due to the cross-linking, and the initial thermal decomposition temperature increased gradually.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.456-463
• /
• 2005

This paper describes a design process of end-milling cutters: solid model of the designed cutter is constructed along with computation of cutter geometry, and the wheel geometry as well as wheel positioning data fur fabricating end-mills with required cutter geometry is calculated. In the process, the main idea is to use the cutting simulation method by which the machined shape of an end-milling cutter is obtained via Boolean operation between a given grinding wheel and a cylindrical workpiece (raw stock). Major design parameters of a cutter such as rake angle, inner radius can be verified by interrogating the section profile of its solid model. We studied relations between various dimensional parameters and proposed an iterative approach to obtain the required geometry of a grinding wheel and the CL data fer machining an end-milling cutter satisfying the design parameters. This research has been implemented on a commercial CAD system by use of the API function programming, and is currently used by a tool maker in Korea. It can eliminate producing a physical prototype during the design stage, and it can be used fur virtual cutting test and analysis as well.