• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2002.10a
• /
• pp.181-184
• /
• 2002

In this research, a basis test on steel fiber concrete's material property was carried out and optimum design as well as material property was examined. In corroboration of it, the compressive strength was compared with the tensile strength and this paper tried to get the initial load of flexural cracking and the ultimate load in the positive-negative moment section through the static test of beam. The addition rate of the steel fiber, 0.75 SFRC specimen was failed at $65{\sim}75%$ of the static ultimate strength and it could be concluded that fatigue strength to two million cycle was around 75.2%.

• Journal of the Korean Home Economics Association
• /
• v.33 no.4
• /
• pp.149-155
• /
• 1995

In this study, the formative property of flare skirts is carry out by the shape horizontal sections of hem line. Flare skirts was made by 10 kinds of fabrics with different physical properties. the length of flare skirts was 60cm. The main results obtained are as follows ; 1, The shape horizontal sections of hem line has differed with number of nodes and fabrics properties, in direction of texture. 2. According to the fabrics analysis of drapability decreased in order from Polyester/nylon(20/80)>Polyester(twill, thickness 0.2441)>Polyester(plain, thickness0.3760)>Polyester(plain, thickness 0.3687)>Polyester(plain, thickness 0.3101). 3. The correlation between the number of nodes and wave-height of modes and breadth showed a high negative correlation with the drapability of fabrics.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.2 s.245
• /
• pp.187-193
• /
• 2006

The butt and the lap welding by friction stir welding performs with $2mm^t$ 1050 aluminum alloy sheet. This paper shows behaviors of property such as vickers hardness, yielding and ultimate stresses, and macro structures for weld zone cross section of the butt and the lap jointed specimens. It is also carried out making comparison with maximum loads, stress-strain diagrams, and deformation after the guided bending test and fracture behaviors between the butt and the lap jointed specimens. It is found that the weldability of the butt jointed specimen is better than that of the lap jointed specimen.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.6
• /
• pp.745-752
• /
• 1996

Wear property of plasma spray coating in $Cr_2O_3$ powder manufatured of spray dry method on the aluminum substrate was inspected for the application of piston-ring of automotive enginel. The plama spray coatings were varied with feed rate and particle size. Used the ball-on disc type tribometer, wear volume, friction, surface rougness were investigated. The delamination of the coating layer were observed with SEM. Also the cross-section of wear track were investigated, using optical microscopy. As a result of experiment, wear mechanism was addressed in the various coating process.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.66-72
• /
• 2009

In order to forecast the progress of the track irregularity, we should observe the long-term track quality and divide a track into some separated divisions which have homogeneous property. For this, we define the division of track which has homogeneous property as a 'Segment' and manage the 'TQI(Track Quality Index)' using track induction data based on each segment. In this study, we introduce some methods of estimating track quality and figure out the TQIs of sample section using new FRA TQI method. In addition, we conducted a basic study of the forecasting model for the progress of track irregularity by analyzing track maintenance data.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.457-460
• /
• 2006

Recently ultra high strength concrete is actively being developed and studied, and this trend is explained with the following effects. Technological effects expected from the application of ultra high strength concrete include the reduction of section, the decrease of structure mass and the improvement of workability. Belite cement has properities like low heat of hydration, excellent long term strength, and durablity without admixture. so, Belite cement is suitable for mass structure which is needed high strenghth, high fluidity and heat property. The objective of this study is to examine the suitability of mixture ratio through experiment of basic physical properties and provide materials for the field application of ultra high strength concrete.

• Journal of Welding and Joining
• /
• v.14 no.5
• /
• pp.49-58
• /
• 1996

In Korea Gas Corporation, as one of the pipeline repairing methods, damaged pipelines are sometimes treated with a temporally employment of split sleeve. On conducting the repair process, circumferential fillet and longitudinal groove welding usually must be included. For the case of groove welding, a considerable amount of R&D have been carried out related to property changes, while few study on the property change in fillet welding has been conducted. In this paper, so as to confirm the specification of fillet welding in terms of safety and reliability, properties changed by fillet welding were investigated for two welding processes. Qualifying tests such as reviewing macrostructure and nick-break tests were performed according to API 1104 and ASME section IX. In addition, tensile properties and hardness were evaluated according to KS B0841 and BS 4515. The fillet weld prepared by the qualified procedure showed melting depth of 0.8∼1.3mm and heat affected zone of 2.8∼3.4mm length. No crack and lack of penetration were observed. And the results of hardness and nick-break tests satisfied code requirements. The area crossed by fillet and groove welding line was found to have minimal tensile strength.

• Journal of Korea Multimedia Society
• /
• v.14 no.12
• /
• pp.1601-1612
• /
• 2011

In recent years, advanced in digital technologies have created significant changes in the way we reproduce, distribute and market Intellectual Property (IP). DRM for multicast contents is complicated risk, the further technology development and human demand, this approaching is still being researched by the scientist and all by the company which is conducting in piracy management reduced, and every country has national policy to make this consortium to limit piracy properties, based on this paper research development, just only two approaching to reduce piracy in DRM they are Industrial Property (IP) and Copyright. In this paper, we are not only figuring and analyzing about the processes to reduce and limit the piracy and unprotected copy law but also describing about the encryption process, watermarking and digital signature process algorithms. The basic concepts of this encryption process for web-based multicast content in DRM are implemented in Java. We conduct this method is a computerized through web based application system approaching to reduce unprotected copy and piracy. Which is used in DRM for multicast content in every section, by providing a fundamental in information technology development, we believe this research is reliable to prove that is unprotected copy, and piracy can be reduced by protecting with this paradigm.

• The Korean Journal of Community Living Science
• /
• v.17 no.4
• /
• pp.15-27
• /
• 2006

Most countries recognize traditional knowledge as an economical resource in recent years, and so are actively participating in WIPO discussions for making sure of their intellectual property rights. In this study, the definition of traditional knowledge was discussed for making clear its categories and relative subjects. A tool for Korean Traditional Knowledge Resource Classification(KTKRC) was developed for putting the data of the resources in order, and was indispensable for searching for and examining cultural artifacts within the system of international intellectual property rights. KTKRC covers comprehensively our various traditional knowledge resources and has a similar structure to IPC for international searching, examining, and information exchange. KTKRC consists of a section of traditional knowledge(A), and three subsections: production technology(A0), living technology(A2) and creative technology(A4). The subsections include 8 classes, 28 subclasses, 105 groups, and a great number of subgroups.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.561-564
• /
• 2003

One of the most important reasons that CFT is used in many conditions is by using that we can achieve the effect, which reduce the section of the member. This research purpose to find the most ideal composition, which is achieved by the investigation in the concrete's property of matter like ability of Slump, Slump Flow, Air content, Bleeding, and Settlement when the high strength of concrete which is over 80㎫ is used in the CFT column.