• 제목/요약/키워드: secondary productivity

검색결과 131건 처리시간 0.027초

환자분류에 의한 일개 2차 의료기관의 간호업무량 조사;전산화를 위한 기초작업으로서 (Measurement of the Nursing Workload by Patient Classification System in a Secondary Hospital;As a Preliminary Step for Computerization of Nursing Staffing and Scheduling)

  • 박정호;조현;박현애;한혜라
    • 간호행정학회지
    • /
    • 제1권1호
    • /
    • pp.132-146
    • /
    • 1995
  • Even though Korean medical law stipulates that number of patients attended by a nurse is 2.5 for hospitalization and 30 for ambulatory care, the number of patients cared by a nurse per day is much greater than the standard prescribed by the medical law. Current productivity of nurses is not desirable unless the quality of care is considered. And nursing manpower staffing based on neither current nurses' productivity nor standard of medical law cannot respond properly to dynamic situation of the medical services. Under this background, the necessity of more efficient management of nursing manpower occupying 1/3 of total hospital workers has been recognized by many nursing administrators. Many nursing researchers have studied to foretell the nursing manpower objectively on the basis of measured nursing workload according to patient classification as well. Most of These researches, however, have been conducted in the tertiary hospitals, so it is imperative to conduct other researches to predict necessary nursing manpower in the secondary and the primary hospitals. The study was performed to measure nursing workload and predict pertinent nursing manpower to a secondary hospital with 400beds. Nursing workload was surveyed using measuring tool for direct and indirect care hours in a surgical unit and a medical unit. Survey was conducted from Sep.10 to Sep.16 and from Oct.5 to Oct.11, 1994 respectively by two skilled nurses, Subjects were patients, patients' family members and nursing personnels. Results are follows : 1. Patient classification distributed as 22% of class I (mildly ill patient), 57% of class II (moderately ill patient), and 21% of class III (acutely ill patient) in the medical nursing unit, while 23% of class I, 29% of class II, 12% of class III, and 36% of classIV (critically ill patient) in the surgical nursing unit. There was no difference of inpatient number between weekday and weekend. Bed circulation rate was 89% in both units and average patients number per day was 37.4 (total 42beds) in the medical nursing unit, 32.9 (total 37beds) in the medical nursing unit. 2. Direct care hours per day measured as 2.8hrs for class I, 3.3hrs for class II, and 3.5hrs for class III in the medical nursing unit, while 3.1hrs for class I, 3hrs for class II, 2.7hrs for class III, and 2.2hrs for classIV in the surgical nursing unit. Meanwhile, hours for nursing assistant activities per patient by patients' family members were 11mins and 200mins respectively. Direct care hour rate by shift was day 36%, evening 25%, and night 39% in the medical nursing unit, while 40%, 29%, and and 31% respectively in the surgical nursing unit. 3. Measurement and observation activity held 44.2% of direct care activities of nurses and medication 36.7%, communication 11.7%, exercise 1.8%, treatment 1.3%, hygiene 1.3%, elimination and irrigation 1.1%, suction 1%, nutrition 0.5%, thermotherapy 0.3%, oxygen therapy 0.1% in order. 4. Indirect care hours per day were 294.2mins in the medical nursing unit, and 273.9mins in the surgical nursing unit. By shift, evening was the highest in both units. Indirect care hours for each patient were 44.5mins in the medical nursing unit and 46mins in the surgical nursing unit. 5. checking activities including doctor's order, medication, and delivering patients to the next shift occupied 39.7% of indirect care activities, and preparation 26%, recording 23.8%, communication and conference 6.7%, managing equipments 2.1%, messenger activity 1.7% in order. 6. On the ground of these results, nursing manpower needed in a secondary hospital was estimated ; 27 nursing personnels for the medical nursing unit of 37beds, and 20 nursing personnels for the surgical nursing unit of 33beds.

  • PDF

항진균물질을 생합성하는 Pseudomonas aeruginosa의 배양생리적 특성 연구 (Fermentation Studies on Pseudomonas aeruginosa Producing Antifungal Secondary Metabolite, PAFS.)

  • 송성기;윤권상;정용섭;전계택
    • 한국미생물·생명공학회지
    • /
    • 제32권1호
    • /
    • pp.52-59
    • /
    • 2004
  • Fructose와 galactose를 배지에 동시에 사용하였을 때 catabolite repression에 의한 PAFS생산성 저해 현상을 극복하기 위해서 본 연구에서는 두 가지 탄소원의 공급량과 유속을 달리하는 유가식 배양으로 PAFS 생산성을 향상시키고자 하였다. 또한 통계적으로 성공률이 매우 높다고 밝혀진 실험방법에 의해 모균주로부터 고생산변이주를 선별하여 생산성이 가장 우수한 것으로 판명된 AP-20 균주를 생물반응기를 이용한 회분식 배양 및 유가식 배양 실험에 이용하였다. 생물반응기에서의 유가식 배양이 회분식 배양에서보다 PAFS생산성이 약 4배 이상 향상되었음을 확인할 수 있었다. 또한 생산균주의 배양생리학적 특성으로서 Pseudomonas aeruginosa는 galactose를 이용해서 세포성장과 이차대사산물 생합성과 관련된 유전자의 발현을 하고 fructose를 이용하여 PAFS를 생합성하는 것으로 추론되며, 너무 느린 탄소원의 공급은 세포성장에 제한요소로 작용하여 이차대사산물의 생합성을 저해하는 것으로 판단되었다. 한편 유가식 배양일지라도 배양 조건에 따라 그 생산성이 뚜렷이 차이가 나는 것으로 관찰되었다 즉 galactos의 초기량이 20g/L이고 fructose 30g/L를 0.032 mL/min의 속도로 공급했을 경우의 PAFS생산량을 100%로 정의했을 때, 초기부터 40 g/L의 galactose가 존재하고 20 g/L의 fructose를 0.032 mL/min의 속도로 공급한 경우에 PAFS생산성이 약 580%향상된 것으로 나타났다.

린 프로세스 기반 아웃리거 시스템의 Set-based Design 적용 방안에 관한 연구 (A Study on the Application Methodology of Set-based Design Approach of Outrigger System based on Lean Process)

  • 이승일;조영상
    • 한국건설관리학회논문집
    • /
    • 제12권4호
    • /
    • pp.50-58
    • /
    • 2011
  • 린은 고객이 정하는 가치를 정의하고 가치의 흐름에 방해되는 불필요하고 낭비되는 요소를 없애는 과정을 기본으로 하는 경영철학이다. 생산관리에서 출발한 린이라는 경영철학은 건설 산업에서“린 건설”이라는 이름으로 건설단계에서 시작되었으며 이제는 생산성 향상을 효과적으로 이룰 수 있는 설계단계로의 확장이 필요한 시점이다. 현재 국내의 구조설계업무방식은 순차적 공학 개념의 Point-based Design 방식으로 설계자의 경험과 판단에 의존하여 초기 설계안을 결정하고 이후 상세설계를 진행하는 과정으로 설계업무가 진행되었다. 이에 반해 동시공학 개념의 Set-based Design 방식은 전체 프로젝트 관점에서 낭비요소를 없애고 프로젝트 생산성 향상을 위해 다양한 설계안을 제한된 범위 내에서 바로 선택하지 않고 더 확실한 정보가 나올 때까지 설계안의 선택을 유보하여 합리적이고 경제적인 설계안을 결정하는 린 기반의 설계 프로세스이다. 본 연구에서는 전통적인 구조설계방식에 대해 SBD방식을 도입하고, SBD프로세스의 의사결정기법으로 계층화분석법(AHP)을 적용하여, 후행업무단계들에 대한 사전 고려로 프로젝트 전체 관점에서의 낭비를 최소화하고 생산성을 향상할 수 있는 설계 방법론을 제안하고 하고자 한다. 이를 위해 PBD와 SBD방식에 대한 분석 및 의사결정방안을 모색하였고, 제안된 SBD프로세스의 사례연구를 통해 실무에서의 활용방안을 제시하였다.

입력자료 개선에 의한 MODIS 총일차생산성의 신뢰도 향상 (Enhancing the Reliability of MODIS Gross Primary Productivity (GPP) by Improving Input Data)

  • 김영일;강신규;김준
    • 한국농림기상학회지
    • /
    • 제9권2호
    • /
    • pp.132-139
    • /
    • 2007
  • 현재 1 km 해상도의 Moderate Resolution Imaging Spectroradiometer(MODIS) 총일차생산성(GPP) 영상이 8일 간격으로 제공되고 있다. 본 연구에서 MODIS GPP 산출에 사용되는 입력기상(DAO)자료와 광합성유효복사흡수율(FPAR) 자료의 오차를 정량화 하였고, 이들 오차가 MODIS GPP의 불확실성에 미치는 영향을 분석하였다. 입력자료의 평가를 위해 지상기상관측소의 기상자료를 사용하였고, 구름효과 등을 저감한 FPAR의 시계열을 복원하였다. 평가 결과 입력자료의 오차는 MODIS GPP에서 17% 정도 과대평가되었다. 두 오차 중에서 기상자료의 오차가 주요 원인이었으며, FPAR의 오차는 부차적인 것으로 판명되었다. 다양한 토지피복 중에서 혼효림의 MODIS GPP 오차가 약 20%로 가장 크고, 농경지는 약 11%의 오차를 보였다. 입력자료에 의한 MODIS GPP의 오차는 GPP의 계절변화뿐만 아니라 연간 GPP 변화에도 상이한 결과를 초래하였다. 따라서 MODIS GPP에 내재한 오차는 상당하다고 판단되며, 향후 GPP 모니터링에 응용하기 위해선 상기 기술한 오차 요인들을 저감한 입력자료에 의거해 MODIS GPP를 재가공할 필요가 있다.

Marked effect of Cuscuta on puerarin accumulation in cell cultures of Pueraria tuberosa grown in shake flasks and a bioreactor

  • Goyal, Shaily;Sharma, Varsha;Ramawat, Kishan G.
    • Plant Biotechnology Reports
    • /
    • 제5권2호
    • /
    • pp.121-126
    • /
    • 2011
  • Isoflavonoid production in cell cultures of Pueraria tuberosa as influenced by an angiospermic parasite, Cuscuta reflexa, was studied. During the time course, maximum isoflavonoid content was recorded when Cuscuta elicitor was added on day 15 of culture. Among various concentrations of elicitor tried, $1g\;l^{-1}$ of Cuscuta elicitor was found to be the most effective. The optimized elicitation conditions were used in vessels of varying capacity where maximum yield of ${\sim}91mg\;l^{-1}$ of isoflavonoid was recorded in a 2-l bioreactor which was about 19% higher than the control cultures. In this case, puerarin content increased up to $11mg\;l^{-1}$ which was 580% higher that the value recorded in the control cultures. In the bioreactor, 8 days of elicitation was optimal for the high accumulation of isoflavonoid, giving productivity of ${\sim}4mg\;l^{-1}\;day^{-1}$. The study showed persistent high isoflavonoid yield even during scale-up. Use of a preparation of Cuscuta reflexa as an elicitor is reported for the first time. The increase in isoflavonoid content was elicitor dose-dependent and can be explored to trigger high yields of isoflavonoid/secondary metabolites in production.

Long Term Outcomes after Pediatric Liver Transplantation

  • Yazigi, Nada A.
    • Pediatric Gastroenterology, Hepatology & Nutrition
    • /
    • 제16권4호
    • /
    • pp.207-218
    • /
    • 2013
  • Long term outcomes after liver transplantation are major determinants of quality of life and of the value of this heroic treatment. As short term outcomes are excellent, our community is turning to take a harder look at long term outcomes. The purpose of this paper is to review these outcomes, and highlight proposed treatments, as well as pressing topics needing to be studied. A systemic review of the English literature was carried in PubMed, covering all papers addressing long term outcomes in pediatric liver transplant from 2000-2013. Late outcomes after pediatric liver transplant affect the liver graft in the form of chronic liver dysfunction. The causes include rejection particularly humoral rejection, but also de novo autoimmune hepatitis, and recurrent disease. The metabolic syndrome is a major factor in long term cardiovascular complication risk. Secondary infections, kidney dysfunction and malignancy remain a reality of those patients. There is growing evidence of late cognitive and executive function delays affecting daily life productivity as well as likely adherence. Finally, despite a good health status, quality of life measures are comparable to those of children with chronic diseases. Long term outcomes are the new frontier in pediatric liver transplantation. Much is needed to improve graft survival, but also to avoid systemic morbidities from long term immunosuppression. Quality of life is a new inclusive measure that will require interventions and innovative approaches respectful not only on the patients but also of their social circle.

구조용 파이프 생산을 위한 새로운 점진적 롤 성형 공정 개발에 관한 기초 연구 (Fundamental Study on the Development of a New Incremental Roll Forming Process for Structural Pipe Manufacturing)

  • 손종윤;윤희석;박원균;심도식
    • 한국정밀공학회지
    • /
    • 제34권3호
    • /
    • pp.217-224
    • /
    • 2017
  • Structural pipe frames are usually manufactured by complex processes, in which a straight pipe with an arbitrary cross-section is prepared via a roll-forming process and then fabricated into three-dimensional shapes by a secondary process. These conventional processes have low productivity. Recently, the inefficiency of the conventional processes has created the need to develop new forming technologies. In this study, a new incremental roll-forming process is proposed. The study is aimed at verifying the feasibility of the proposed process and investigating the fundamental process parameters using finite-element simulations. The result of the simulation demonstrates that the proposed process can be used effectively for cold fabrication of various shapes of structural pipes. In addition, the result of the investigation of parameters shows that the forming amount, number of roll sets, and distance between roll sets are significant factors to be considered in resolving dimensional errors of the product and improving its quality.

Bacterial Cellulose 생산균 KJ-1으로 부터 uv와 NTG mutant들의 cellulose 생산수율의 증가

  • 김혜은;손창진;정선용;김성준
    • 한국생물공학회:학술대회논문집
    • /
    • 한국생물공학회 2001년도 추계학술발표대회
    • /
    • pp.723-726
    • /
    • 2001
  • 본 연구에서는 BC 생산균주인 KJ-1을 UV와 NTG mutagenesis를 통하여 초기에 주입된 glucose를 효과적으로 이용하여 cellulose 수율이 향상된 균주로 계량하였다. Mutant들 중 수율이 2배정도 향상한 균주에서는 cellulose를 비롯한 gluconic acid, 2-keto gluconic aicd, 5-keto gluconic acid의 비율이 parent strain과 차이를 보였고, 시간에 따른 acid 농도 분포를 살펴보면 수율이 증가한 원인 중에 mutant가 parent strain보다 합성한 acid를 효율적으로 이용하고 있다고 추론 할 수 있었다.

  • PDF

Using ICT for Mongolia's sustainable development in energy industry

  • Tungalag, Azjargal;Kim, Yun Seon
    • Asia Pacific Journal of Business Review
    • /
    • 제2권1호
    • /
    • pp.21-52
    • /
    • 2017
  • Nowadays every technology is becoming smarter. Consequently, intensive use of ICT in the whole industries and cities enables a sustainable approach to meet enormous productivity, efficiency, transparency and conservation of natural recourses. Likewise, the role of ICT in terms of controlling, monitoring in the energy industry allows integrating potential renewables, bulk energy conservation and reliable optimized operation in the entire system. In this paper outlines challenging issues in renewable energy integration in Mongolia and proposes potential recommendations and conclusions. The author investigated the main technologies used in energy industry mainly smart grid, challenges and policy aspect in Mongolian energy sector by using the primary and secondary approach with case studies and literature based methodologies. Based on the policy aspect and current implementation of smart grid, the paper tries to address the readiness for the main application and future potential ICT driven applications. Furthermore, it concluded that ICT convergence is demanded to overcome the current vulnerabilities and significant momentum to leave behind by using its potential energy recourses and favorable geographical state. Policymakers may find this study useful, as it answers the question of whether ICT investment can ultimately reduce energy consumption and may aid in future planning. Even tough, in order to develop a smart grid and integrating renewables firstly set an appropriate market structure, ICT will key enabler to make energy system more profitable and sustainable. Regarding the result of this study, ICT deployment contribution is a huge demand for future opportunities energy in Mongolia.

이중사출의 접합성 개선 및 생산성향상을 위한 금형구조 개발기술연구 (A technical study on mold construction development for junction improvement and productivity improvement of Double-Injection molding)

  • 김옥래;이상용;김영근;우창기;한일용
    • Design & Manufacturing
    • /
    • 제2권6호
    • /
    • pp.49-55
    • /
    • 2008
  • Double-injection molding can inject two different materials or two colors in the same mold and process. If this injection process use, product has ability because the base part maintain strength and specified part can inject soft-material. It makes the cost down by single operation automatically for saving wages. In this paper, we designed double-injection mold for automobile remote control to inject secondary using this part as insert after inject external appearance of product. CAE analysis was progressed gate location and runner size as variable and analysis result is reflected in mold design process. As a result, it could solved badness that is generated at the conventional mold. Additionally, cost is downed by reducing loss of runner as well as could omit painting process because surface of finished product is improved through new mold.

  • PDF