• Journal of dental hygiene science
• /
• v.14 no.4
• /
• pp.589-596
• /
• 2014

This study was designed to investigate the using status and awareness of pit and fissure sealant, and how it affects on secondary caries when performed on above of initial caries. After classifying 446 occlusal surface into four groups, performed pit and fissure sealant, induced artificial caries, used DIAGNOdent (Kavo) to measure degree of secondary caries. Also, distributed a questionnaire on dental clinic in metropolitan area to find out using status and awareness of pit and fissure sealant, the following results were obtained. 1) On inspection and percussion, Group 4 corresponding to the enamel caries showed the highest secondary caries after sealant and was statistically significant difference in the order of initial group, stained group, sound group (p<0.05). 2) Inspection showed the highest percentage on tooth fissure caries diagnostic methods before sealant. 3) 56.6% didn't know about DIAGNOdent, 91.6% didn't have it. 4) In clinically, the most cause of secondary caries after sealant was a broken sealant, making caries on the downward. Based on the results of above study, degree of caries under sealant could affect on secondary caries, needs publicity about the use and necessity of objective fluorescence device.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.29 no.1
• /
• pp.275-282
• /
• 1999

Purpose: The objective of this study was to compare clinical examination of dental caries and secondary caries with panoramic examination. and to examine bone lesions and dental anomaly of unerupted state. Materials and Methods: In this study. clinical records and panoramic radiographs were available for 89 first grade students in elementary school. Dental caries of occlusal surfaces. proximal surfaces. and buccolingual surfaces were examined. Secondary caries was examined too. In addition. the central lesion and dental anomaly of unerupted state were examined in panoramic radiographs. Results: The obtained results were as followed: 1. Carious detectability of clinical examination in occlusal and buccolingual surface was higher than that of panoramic examination. but it is statistically insignificant(p>0.05). In proximal surface. carious detect ability of panoramic examination was higher than that of clinical examination. and it is statistically significant(p<0.01). 2. In contrast to clinical examination only. when the two examination methods were combined. there was additional detection of dental caries(26.7％ in occlusal surface. 48.2％ in proximal surface. 33.3％ in buccolingual surface. and 38.3％ totally). 3. In detection of secondary caries. panoramic examination had lower ability than clinical examination in all three surfaces. but in case that both methods were combined. totally 36.0％ extra carious lesions were detected. 4. In panoramic examination. detectability of secondary caries in upper teeth is lower than lower teeth. 5. In panoramic examination. it was possible to detect the central lesions and dental anomalies of unerupted state which cannot be detected in clinical examination. Conclusion: It is useful to combine the panoramic examination with clinical examination in order to increase carious detectability and to evaluate the central lesions and dental anomalies of unerupted state

• Restorative Dentistry and Endodontics
• /
• v.17 no.1
• /
• pp.206-213
• /
• 1992

The aim of this study was to compare the accuracy of radiographic diagnosis of secondary carious lesions adjacent to composite filling materials with different radiopacity. The level of radiopacity that is most compatible with the radiographic diagnosis of secondary caries was studied in a two part experiment. In the first part, the radiopacity of 6 posterior composites CBP, CF, HM, LF, PQ, P50), enamel and dentin were measured by desitometer and 6 posterior composites divided into 3 groups based on their level of radiopacity compared with enamel and dentin. In the seocnd part, class II composite fillings with or without secondary caries were made in extracted premolar and radiographs of the teeth were examined by 10 dentists to diagnose simulated carious lesion. The following results were obtained: 1. The radiopacity of 6 posterior composites varied between 1.76(PQ) and 6.78(P50)mm Al equivalent. 2. For 4 composites the radiopacity exeeded that of an equal thickness of enamel, and for two the radiopacity was lower than that of dentin. 3. The detection of secondary caries was facillitated when the radiopacity of a composite resin was similar to or slightly greater than that of enamel.

• The Journal of the Korean dental association
• /
• v.10 no.8
• /
• pp.503-507
• /
• 1972

Authors had observed the average numbers of the fille teeth per mouth, and the occurrence rates of the secondary caries around the various forms of the filling bodies in 2,093 dental out-patients in the Infirmary, College of Dentistry, Seoul National University in 1970, in order to make a basic data considered in the establishment of the policy for the dental health in Korea. The obtained results were as follows: 1. In Korea, the average number of the filled teeth per mouth in the dental out patients had been increased gradually. 2. In the dental out-patients in 1970, the relative rate of amalgam filling bodies had been decreased, but the relative rate of gold inlays increased compared with the dental out-patients in 1963 and 1964. 3. The secondary caries around the various forms of the filling bodies was 6.38 percent of total caries cavities. 4. 17.14 percent of total filling bodies was accompanied with the secondary caries. 5. The secondary caries had been occurred from the margin in 22.52 percent of amalgam filling bodies, in 8.84 percent of gold inlays, in 18.84 percent of silicate filling bodies, and in 22010 percent of temporary filling bodies.

• Imaging Science in Dentistry
• /
• v.41 no.4
• /
• pp.143-150
• /
• 2011

Purpose : The aim of this study was to compare the diagnostic accuracy of cone-beam computed tomography (CBCT) images and bitewing images in detection of secondary caries. Materials and Methods : One hundred and twenty proximal slots of Class II cavities were randomly prepared on human premolar and molar teeth, and restored with amalgam (n=60) and composite resin (n=60). Then, artificial secondary caries lesions were randomly created using round steel No. 4 bur. The teeth were radiographed with a conventional bitewing technique and two CBCT systems; Pax-500ECT and Promax 3D. All images were evaluated by five observers. The area under the receiver operating characteristic (ROC) curve ($A_z$) was used to evaluate the diagnostic accuracy. Significant difference was tested using the Friedman test (p value<0.05). Results : The mean $A_z$ values for bitewing, Pax-500ECT, and Promax 3D imaging systems were 0.882, 0.995, and 0.978, respectively. Significant differences were found between the two CBCT systems and film (p=0.007). For CBCT systems, the axial plane showed the greatest $A_z$ value. Conclusion : Based on the design of this study, CBCT images were better than bitewing radiographs in detection of secondary caries.

• Restorative Dentistry and Endodontics
• /
• v.18 no.1
• /
• pp.122-132
• /
• 1993

The aim of this study was to investigate the level of radiopacity of glass ionomer cements and to determine the optimum level of radiopacity that is the most compatible with the radiographic diagnosis of secondary caries. The experiments were performed in two parts. In the first part, the radiopacities of 9 glass ionomer cements (FI, FII, FI-LC, FII-LC, SI, SII, Vit, B-VLC, AC) and base materials(Ultra-Blend, Zinc phoaphate cements, Cavitec, Dycal) were measured by densitometer. Then all experimental materials were divided into 5 groups based on the level of radiopacity of enamel and dentin. In the second part, class III cavities with or without secondary caries were prepared in extracted anterior teeth. The representative materials of each group with different radiopacities were inserted into each cavity. The radiographs were interpreted by 15 dentists and seconsary caries were diagnosed according to a five-point confidence rating. Sensitivity and ROC analysis were used to compare observer performance. The following results were obtained : 1. The radipacity of glass ionomer cements varied between 1.111mm Al and 6.011mm Al equivalent. 2. Among experimental materials, three materials in group I had lower radiopacity than that of dentin. The radiopacity of two materials in group II slightly exeeded that of dentin. Three materials in group III had slightly lower radiopacity than that on enamel. The radiopacity of one material in group W was slightly higher than that of enamel. Four materals in group V had the radiopacity that exeeded over 2.0mm AI equivalent to that of enamel. 3. The group IV was the highest for sensitivity and the group V was the highest for ROC area. However, no significant differences were obtained among group II, III, IV and V (P<0.05) but only group I was significantly lower(P<0.01). 4. In comparison with the observer performance for the radiographic diagnosis of secondary caries, the group II, III, IV, and V were superior to the group I (P<0.01). And so the optimum level of radiopacity to detect the secondary caries was the radiopacity that is higher than that of dentin.

• Journal of dental hygiene science
• /
• v.17 no.2
• /
• pp.116-122
• /
• 2017

The purpose of this study was to evaluate the detection ability of secondary caries using qunatitative light-induce fluorescence-digital (QLF-D) device. Twenty bovine teeth with cavity on surface were demineralized during 21 days for secondary caries lesion of cavity wall. After 21 days, cavity was filled using composite resin and cut the specimen in half with disc. Fluorescence loss of lesion on surface by time flow, cross sectional lesion, and lesion of filled or unfilled surface were analyzed using analysis software. ${\Delta}F$ (value of fluorescence loss) of the lesion on surface assessed by the QLF-D increased significantly over time up to 21 days. And ${\Delta}F$ value of lesion of filled surface is significantly lower than that of unfilled surface (p<0.001). ${\Delta}F$ of filled surface is 1.31 times of cross section lesion. The correlation of between ${\Delta}F$ of filled surface lesion and ${\Delta}F$ of cross section lesion was showed low agreement (0.026) and correlation of between ${\Delta}F$ of unfilled surface lesion and ${\Delta}F$ of cross section lesion was showed high agreement (0.613). In conclusion, secondary caries can be detected on surface using QLF-D. However, interference of fluorescence of filling material is the points to be especially considered for exact analysis of secondary caries lesion.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.18 no.5
• /
• pp.277-285
• /
• 2018

Chemo-mechanical caries removal methods are known to be more effective compared with conventional methods in pain reduction. $Carie-care^{TM}$, a chemo-mechanical caries removal agent, was introduced in 2010 but a systematic review of its efficacy has not yet been performed. The purpose of this study was to investigate the effectiveness of $Carie-care^{TM}$ on the outcomes of treatment of caries in children and adolescents. The primary outcome was pain while the secondary outcomes included complete caries removal (CCR), time, need for local anesthesia and behavioral response changes. A Comprehensive literature search was performed in PubMed, EMBASE, and the Cochrane Library up to 30 September 2018. The following keywords were used in the search: 'chemo-mechanical caries removal agent', 'dental caries', 'Carie-care', 'chemo-mechanical caries removal', 'chemo-mechanical caries excavation', other related keywords, and their combinations. From 942 studies identified, 16 were analyzed. Finally, 4 studies met the eligibility criteria and 260 teeth in 120 children and adolescents were included in this review. This review showed that $Carie-care^{TM}$ reduces pain during caries treatment but requires a longer time for effective treatment than conventional methods. Local anesthesia was not required in the Chemo-mechanical caries removal (CMCR) group. In addition, dental anxiety decreased compared to the control group, and co-operation was more positive. Therefore, it may be a useful alternative to conventional methods in children and adolescents, but further verification through additional studies is needed.

• Journal of Korean society of Dental Hygiene
• /
• v.16 no.1
• /
• pp.45-52
• /
• 2016

Objectives: The purpose of the study was to investigate the cumulative dental caries rate of pit and fissure sealant in community public health program from 2005 to 2008 follow-up. Methods: The subjects were 4,768 students of 34 elementary schools in Gimcheon. The survey included direct oral examination and cumulative retention rate of pit and fissure sealant from 2005 to 2008. Data were analyzed using PASW statistical package version 18.0 and the level of significance was set at p<0.05. Results: The cumulative retention rate of sealant was 18%, 25%, and 33% after 1 year, 2 years, and 3 years, respectively. In addition, the cumulative retention rate of lower teeth was higher than that of upper teeth. Cumulative dental caries rate increased in sealed group and no sealed group. The cumulative dental caries rate decreased owing to tooth brushing frequency in sealed group and no sealed group. Conclusions: Regular and timely tooth brushing can maintain good oral health condition after tooth sealing. The school based oral health education can prevent loss of sealant and secondary caries.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.8 no.1
• /
• pp.76-82
• /
• 1999

Zinc phosphate cement has long been the material of choice for permanent luting of cast restorations, and through many years of use has been considered effective to retain castings. However, cast restorations cemented with this material have been susceptible to secondary caries. Glass ionomer luting agents become available in the late 1970s. These material s, through release of fluoride, show considerable promise as a means of reducing secondary caries. Other favorable traits include significantly less disintegration in vivo than zinc phosphate cements, a film thickness comparable to that of zinc phosphate cement, and adhesion to tooth structure. Compomer materials were created in 1993 as a filling material for deciduous teeth, cervical lesions, and class III cavities. In the meantime, compomer have been developed as chemical hardening cements for cast gold restorations. The aim of this paper is to review the articles on luting cements to help the choice of dental cements.