• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.236-241
• /
• 2004

In this paper, the dual stage interaction between the coarse actuator and the fine actuator of an optical disk drive and the control method to enhance the track pull-in performance are discussed. First, the interaction analyses for the dual stage, and the experiments to find the each actuator dynamics are studied. From the experiments results, some physical parameters was derived, then, some simulations are performed to find the residual vibration effect of the fine actuator during seek motion. Second, the fine actuator control method to reduce the relative velocity, which is a key factor in track pull-in performance, between the target track and beam spot is proposed. From simulations, we show that fine actuator control which has same frequency and same phase of the disturbance is effective to reduce the relative velocity, hence, the control method is good approach in the track pull-in enhancement. Finally, the some comments are discussed briefly.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• 제44권3호
• /
• pp.61-69
• /
• 2007

This paper proposes new preprocessing algorithm to extract minutiae in the process of fingerprint recognition. Fingerprint images quality enhancement is a topic phase to ensure good performance in a topic phase to ensure good performance in a Automatic Fingerprint Identification System(AFIS) based on minutiae matching. This paper proposes an algorithm to improve fingerprint image preprocessing to extract minutiae accurately based on directional filter. We improved the suitability of low quality fingerprint images to better suit fingerprint recognition by using valid ridge vector and ridge probability of fingerprint images. With the proposed fingerprint improvement algorithm, noise is removed and presumed ridges are more clearly ascertained. The algorithm is based on five step: computation of effective ridge vector, computation of ridge probability, noise reduction, ridge emphasis, and orientation compensation and frequency estimation. The performance of the proposed approach has been evaluated on two set of images: the first one is self collected using a capacitive semiconductor sensor and second one is DB3 database from Fingerprint Verification Competition (FVC).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제21권5호
• /
• pp.468-474
• /
• 2010

In this paper, a VCHO(Voltage Controlled Harmonic Oscillator) for K-band application has been designed and implemented. The proposed oscillator has a structure of two hair-pin resonators placed on input and output of active device. Using in/out common frequency tuning structure, the VCHO yields some advantages of the enhanced fundamental frequency suppression characteristic as well as the improved output power of second harmonic. According to implementation and measurement results, it was shown that a VCHO provides an output power of -2.41 dBm, a fundamental frequency suppression of -21.84 dBc, and phase noise of -101.44 dBc/Hz at 100 kHz offset. In addition, as for the bias voltage from 0 V to -10 V for the varactor diode, output frequency range of 10.58 MHz is obtained with a power variation of ${\pm}0.19\;dB$ over its frequency range.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제18권8호
• /
• pp.1226-1237
• /
• 1993

For data transmission over strictly band-limited non-ideal channels, different types of filters with arbitrary responses are needed. In this paper. we proposed two efficient techniques for the design of such FIR filters whose response is specified in either the time or the frequency domain. In particular when a fractionally-spaced structure is used for the transceiver, these filters can be efficiently designed by making use of characteristics of oversampling. By using a minimum mean-squared error criterion, we design a fractionally-spaced FIR filter whose frequency response can be controlled without affecting the output error. With proper specification of the shape of the additive noise signals, for example, the design results in a receiver filter that can perform compromise equalization as well as phase splitting filtering for QAM demodulation. The second method ad-dresses the design of an FIR filter whose desired response can be arbitrarily specified in the frequency domain. For optimum design, we use an iterative optimization technique based on a weighted least mean square algorithm. A new adaptation algorithm for updating the weighting function is proposed for fast and stable convergence. It is shown that these two independent methods can be efficiently combined together for more complex applications.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제19권2호
• /
• pp.250-256
• /
• 2008

In this paper, an X-band oscillator is presented using a new miniaturized microstrip hairpin resonator. The newly designed hairpin resonator on the microstrip line employs the spiral structure, which shows a higher loaded quality factor and the 50 % reduced circuit area compared to the conventional one at 9.2 GHz. The oscillator using proposed resonator shows the output power of 10.87 dBm, the second harmonic suppression of 41.99 dBc, and the phase noise performance of -101.49 dBc/Hz at 100 kHz offset, which is better than the conventional resonator oscillator by 6.17 dB.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• 제42권3호
• /
• pp.25-32
• /
• 2005

In this papers, we first, therefore, designed VCO(voltage controlled oscillator) that is composed of the dielectric resonator and the varactor diode, and then designed and fabricated PLDRO(phase locked dielectric resonator oscillator) that is combined with the sampling phase detector and loop filter. The measured results of the fabricated PLDRO at 12.05 [GHz] show the output power is 13.54 [dBm], frequency tuning range approximately +/- 7.5 [MHz], and Power variation over the tuning range less than 0.2 [dB], respectively. The phase noise which effects on bits error rate in digital communication is obtained with -114.5 [dBc/Hz] at 100 [KHz] offset from carrier, and The second harmonic suppression is less than -41.49 [dBc]. These measured results are found to be more improved than those of VCO without adopting PLL, and the phase noise and power variation performance characteristics show the better performances than those of conventional PLL.

• ETRI Journal
• /
• 제33권4호
• /
• pp.558-568
• /
• 2011

In this paper, we propose an efficient macrodiversity handover (MDHO) technique for time-division-based interference-limited IEEE 802.16j multihop wireless relay networks. In the proposed MDHO, when the diversity set members of the mobile station (MS) are a base station (BS) and relay station (RS), the MS receives the signal transmitted by the BS in the first phase. During the second phase, it also receives the simultaneous transmissions of the BS and RS. Furthermore, when the diversity set members are two RSs or two BSs, the MS receives only the simultaneous transmissions of the diversity set members. The superiority of the proposed MDHO is validated using analytical and simulation results. The performance analysis metrics are the average downlink (DL) carrier to interference and noise ratio (CINR), the average DL spectral efficiency, and the average service outage probability. Evaluation results show that the proposed MDHO significantly outperforms the conventional MDHO. The CINR gain achieved using the proposed MDHO is 4.71 dB compared to the conventional MDHO.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• 제44권9호
• /
• pp.71-80
• /
• 2007

This paper presents a new push-push VCO technique that extracts a second harmonic output signal from a capacitive commonnode in a negativegm oscillator topology. The generation of the $2^{nd}$ harmonics is accounted for by the nonlinear current-voltage characteristic of the emitter-base junction diode causing; 1) significant voltage clipping and 2) different rising and falling time during the switching operation of core transistors. Comparative investigations show the technique is more power efficient in the high-frequency region that a conventional push-push technique using an emitter common node. Prototype 12GHz and 17GHz MMIC VCO were realized in GaInP/GaAs HBT technology. They have shown nominal output power of -4.3dBm and -5dBm, phase noise of -108 dBc/Hz and -110.4 dBc/Hz at 1MHz offset, respectively. The phase noise results are also equivalent to a VCO figure-of-merit of -175.8 dBc/Hz and -184.3 dBc/Hz, while dissipate 25.68mW(10.7mA/2.4V) and 13.14mW(4.38mA/3.0V), respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제37권4A호
• /
• pp.214-218
• /
• 2012

In this paper, we reported on a high performance waveguide VCO(voltage controlled oscillator) for FMCW applications. The waveguide VCO consists of a GaAs Gunn diode, a varactor diode, and two bias posts with low pass filter(LPF). The cavity is designed for fundamental mode at 47 GHz and operated at second harmonic of 94 GHz center frequency. The developed waveguide VCO has 1.095 GHz bandwidth, 590 MHz linearity with 1.69% and output power from 14.86 to 15.93 dBm. The phase noise is under -95 dBc/Hz at 1 MHz offset.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제15권5호
• /
• pp.437-443
• /
• 2004

Aperture has been employed on the ground plane in the hairpin resonator. Aperture has been fabricated by etching the part of the ground effected coupling coefficient and then quality factor of hairpin resonator has been increased. When the hairpin oscillator using aperture has been compared with the conventional hairpin oscillator using microstrip, it has been improved the phase noise about 19 ㏈c @100 ㎑. As a result of PBG connecting to the output of the employing aperture hairpin oscillator, the second and third harmonics are suppressed. In this paper, oscillator has been designed and fabricated in operating 5.8 ㎓ band. The output power has been obtained 0,67 ㏈m and the second harmonic has been suppressed about -53,67 ㏈c.