• 한국초지조사료학회지
• /
• 제37권4호
• /
• pp.350-357
• /
• 2017

Near infrared spectroscopy (NIRS) is a rapid and accurate method for analyzing the quality of cereals, and dried animal forage. However, one limitation of this method is its inability to measure fermentation parameters in dried and ground samples because they are volatile, and therefore, respectively lost during the drying process. In order to overcome this limitation, in this study, fresh coarse haylage was used to test the potential of NIRS to accurately determine chemical composition and fermentation parameters. Fresh coarse Italian ryegrass haylage samples were scanned at 1 nm intervals over a wavelength range of 680 to 2500 nm, and optical data were recorded as log 1/reflectance. Spectral data, together with first- and second-order derivatives, were analyzed using partial least squares (PLS) multivariate regressions; scatter correction procedures (standard normal variate and detrend) were used in order to reduce the effect of extraneous noise. Optimum calibrations were selected based on their low standard error of cross validation (SECV) values. Further, ratio of performance deviation, obtained by dividing the standard deviation of reference values by SECV values, was used to evaluate the reliability of predictive models. Our results showed that the NIRS method can predict chemical constituents accurately (correlation coefficient of cross validation, $R_{cv}^2$, ranged from 0.76 to 0.97); the exception to this result was crude ash ($R_{cv}^2=0.49$ and RPD = 2.09). Comparison of mathematical treatments for raw spectra showed that second-order derivatives yielded better predictions than first-order derivatives. The best mathematical treatment for DM, ADF, and NDF, respectively was 2, 16, 16, whereas the best mathematical treatment for CP and crude ash, respectively was 2, 8, 8. The calibration models for fermentation parameters had low predictive accuracy for acetic, propionic, and butyric acids (RPD < 2.5). However, pH, and lactic and total acids were predicted with considerable accuracy ($R_{cv}^2$ 0.73 to 0.78; RPD values exceeded 2.5), and the best mathematical treatment for them was 1, 8, 8. Our findings show that, when fresh haylage is used, NIRS-based calibrations are reliable for the prediction of haylage characteristics, and therefore useful for the assessment of the forage quality.

• 한국수자원학회논문집
• /
• 제44권2호
• /
• pp.145-156
• /
• 2011

본 연구에서는 자연하천의 흐름에서 흔히 발생하는 천이류, 불연속류, 마른하도로의 파의 전파 등을 포함하는 복잡한 흐름을 해석하기 위한 고정확도 2차원 수치모형을 개발하였다. 하상경사항을 효율적으로 처리하기 위해 quasi-steady wave propagation 기법을 적용하여 해당 격자에 대한 생성항의 영향을 효율적으로 반영함으로써 쌍곡선형 적분 보존형의 2차원 천수방정식을 해석하였다. Fractional Step Method를 적용한 유한체적기법의 사용을 위해 HLL Riemann 해법을 이용하여 흐름률을 계산하였고, 시간 및 공간에 대한 2차 정확도를 만족하기 위해 MUSCL 기법을 적용하였다. 2차 정확도의 사용으로 불연속지점에서 발생하는 수치진동은 TVD 기법 적용을통해 제어하였다. 개발된모형은 2차원 제방 붕괴 및 댐하류부에 구조물이 존재하는 경우의댐 붕괴 모의를 통해실측치와의 검증을 실시하였다. 또한 하류부에 역경사가 존재하는 경우의 댐 붕괴 모의를 통해 실측치와 비교함으로써 생성항의 영향에 대한 모형의 적용성을 검증하였다.

• 전산구조공학
• /
• 제7권1호
• /
• pp.109-116
• /
• 1994

구조물의 신뢰도를 평가하는 방법을 살표보고 각각의 장.단점을 비교한다. 각 방법의 정확성을 평가하는 기준으로는 Crude Monte Carlo(CMC)방법을 택하여 Importance Sampling(IS)방법, 그리고 Directional Simulation(DS) 방법을 살펴보고 1차 근사방법은 현재 많이 사용되고 있는 Rackwitz-Fiessler(RF)방법, Chen과 Lind가 제안한 3-parameter방법(CL), Hohenbichler가 제안한 Rosenblatt 변환방법(RT)을 그리고 2차 근사방법은 Breitung이 제안한 곡률적합 포물선 (Curvature Fitted Paraboloid, CFP) 공식과 Kiureghian이 제안한 점적합 포물선(Point Fitted Paraboloid, PFP)공식, 그리고 Log-Likelihood Function을 이용하여 원변수공간에서 파괴확률을 구하는 2차 근사공식(LLF)을 비교한다. 그리고 한계상태식이 불명확할 때 효율적으로 사용할 수 있는 반응응답법(Response sufrace method, RSM)을 살펴본다. 각 방법의 효율성 특히 적용 가능성을 예제를 통해 해석한 결과 추출법의 경우는 DS방법이, 그리고 근사방법에서는 RSM방법이 효율적임을 알 수 있다.

• 한국안전학회지
• /
• 제35권3호
• /
• pp.49-57
• /
• 2020

In comparison with the existing static reliability analysis methods, the dynamic reliability analysis(DyRA) method is more suitable for estimating the failure probability of a structure subjected to earthquake excitations because it can take into account the frequency characteristics and damping capacity of the structure. However, the DyRA is known to have an issue of numerical stability due to the uncertainty in random sampling of the earthquake excitations. In order to solve this numerical stability issue in the DyRA approach, this study proposed two earthquake-scale factors. The first factor is defined as the ratio of the first earthquake excitation over the maximum value of the remaining excitations, and the second factor is defined as the condition number of the matrix consisting of the earthquake excitations. Then, we have performed parametric studies of two factors on numerical stability of the DyRA method. In illustrative example, it was clearly confirmed that the two factors can be used to verify the numerical stability of the proposed DyRA method. However, there exists a difference between the two factors. The first factor showed some overlapping region between the stable results and the unstable results so that it requires some additional reliability analysis to guarantee the stability of the DyRA method. On the contrary, the second factor clearly distinguished the stable and unstable results of the DyRA method without any overlapping region. Therefore, the second factor can be said to be better than the first factor as the criterion to determine whether or not the proposed DyRA method guarantees its numerical stability. In addition, the accuracy of the numerical analysis results of the proposed DyRA has been verified in comparison with those of the existing first-order reliability method(FORM), Monte Carlo simulation(MCS) method and subset simulation method(SSM). The comparative results confirmed that the proposed DyRA method can provide accurate and reliable estimation of the structural failure probability while maintaining the superior numerical efficiency over the existing methods.

• IEIE Transactions on Smart Processing and Computing
• /
• 제6권1호
• /
• pp.10-17
• /
• 2017

We propose classification algorithms for human and dog movement. The proposed algorithms use micro-Doppler signals obtained from humans and dogs moving in four different directions. A two-stage classifier based on a support vector machine (SVM) is proposed, which uses a radial-based function (RBF) kernel and $16^{th}$-order linear predictive code (LPC) coefficients as feature vectors. With the proposed algorithms, we obtain the best classification results when a first-level SVM classifies the type of movement, and then, a second-level SVM classifies the moving object. We obtain the correct classification probability 95.54% of the time, on average. Next, to deal with the difficult classification problem of human and dog running, we propose a two-layer convolutional neural network (CNN). The proposed CNN is composed of six ($6{\times}6$) convolution filters at the first and second layers, with ($5{\times}5$) max pooling for the first layer and ($2{\times}2$) max pooling for the second layer. The proposed CNN-based classifier adopts an auto regressive spectrogram as the feature image obtained from the $16^{th}$-order LPC vectors for a specific time duration. The proposed CNN exhibits 100% classification accuracy and outperforms the SVM-based classifier. These results show that the proposed classifiers can be used for human and dog classification systems and also for classification problems using data obtained from an ultra-wideband (UWB) sensor.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제26권4호
• /
• pp.185-223
• /
• 2022

The classical equation of Jonathan Homer Lane and Robert Emden, a nonlinear second-order ordinary differential equation, models the isothermal spherical clouded gases under the influence of the mutual attractive interaction between the gases' molecules. In this paper, the Adomian decomposition method (ADM) is presented to obtain highly accurate and reliable analytical solutions of a class of generalised Lane-Emden equations with strong nonlinearities. The nonlinear term f(y(x)) of the proposed problem is given by the integer powers of a continuous real-valued function h(y(x)), that is, f(y(x)) = h^m(y(x)), for integer m ≥ 0, real x > 0. In the end, numerical comparisons are presented between the analytical results obtained using the ADM and numerical solutions using the eighth-order nested second derivative two-step Runge-Kutta method (NSDTSRKM) to illustrate the reliability, accuracy, effectiveness and convenience of the proposed methods. The special cases h(y) = sin y(x), cos y(x); h(y) = sinh y(x), cosh y(x) are considered explicitly using both methods. Interestingly, in each of these methods, a unified result is presented for an integer power of any continuous real-valued function - compared with the case by case computations for the nonlinear functions f(y). The results presented in this paper are a generalisation of several published results. Several examples are given to illustrate the proposed methods. Tables of expansion coefficients of the series solutions of some special Lane-Emden type equations are presented. Comparisons of the two results indicate that both methods are reliably and accurately efficient in solving a class of singular strongly nonlinear ordinary differential equations.

• 한국멀티미디어학회논문지
• /
• 제14권3호
• /
• pp.378-391
• /
• 2011

본 논문에서는 입력장치로 들어오는 수많은 시각정보 중 현 시점에서 가장 유용하다고 생각되는 정보를 인간의 상향식 주의시각에 기반하여 선택하는 시각정보 선택기법에 대해 소개한다. 제안하는 시스템은 색상, 명도, 방위, 형태 등 저수준의 공간특징 외에 시간특징으로서 움직임 정보와 3차원 정보인 깊이 정보를 추가적으로 사용함으로써 기존방법에 비해 정보 선택의 정확도를 높혔다. 움직임 정보 추출 시 발생할 수 있는 노이즈를 제거하기 위해 인간의 움직임 인지에 대한 연구결과를 이용하는 새로운 접근법을 사용하였으며, 입력 영상 내 객체들이 부분적으로 겹쳐있다거나 동일한 현저도를 가지고 있을 때에도 현저한 영역을 제대로 선택해낼 수 있도록 깊이 정보를 사용하여 유의미한 영역을 선별하고 우선순위를 부여하였다. 실험결과를 통해 제안하는 방법이 기존의 방법에 비해 높은 정확도를 가짐을 확인할 수 있었다.

• 한국융합학회논문지
• /
• 제12권10호
• /
• pp.365-372
• /
• 2021

본 연구의 목적은 자연어처리에 의해 생성된 욕창간호진술문의 특성을 파악하고, 욕창 단계판별 예측정확도를 평가하기 위함이다. 욕창관련 간호기록은 서술통계를 이용하여 분석하였고, 워드클라우드 생성기를 활용하여 욕창예방 간호기록에서 단어의 특성을 파악하였다. 딥러닝을 이용하여 욕창단계판별 정확도(accuracy ratio) 를 구하였다. 연구결과, 욕창의 단계에 대한 기록 중 2단계와 심부조직손상의심단계가 각각 23.1% 와 23.0 % 로 가장 많았고, 빈도수가 높은 핵심단어는 홍반, 수포, 가피, 부위, 크기 등으로 나타났다. 예측의 정확도가 높은 단계는 0단계, 심부조직손상의심단계, 2단계 순으로 나타났다. 따라서, 이를 활용하여 임상적 의사결정지지 시스템으로 개발된다면, 임상간호사의 욕창관리역량 향상 전략 개발에 기초가 될 수 있을 것이다.

• 전자공학회논문지CI
• /
• 제45권2호
• /
• pp.1-9
• /
• 2008

휴대폰에서 보안 필요성이 증가함에 따라 개인 인증을 위하여 홍채, 지문, 얼굴과 같은 단일 생체 정보를 이용한 많은 연구들이 진행되었으나 단일 생체 인식에서는 인식 정확도에 한계가 있었다. 따라서 본 논문에서는 휴대폰 환경에서 고 인식율을 위해 얼굴과 홍채를 결합하는 방법에 대해 제안한다. 본 논문에서는 근적외선 조명과 근적외선 통과 필터를 부착한 휴대폰의 메가 픽셀 카메라를 사용하여 근적외선 얼굴 및 홍채 영상을 동시에 취득한 후, SVM(Support Vector Machine)을 기반으로 스코어 레벨에서 결합하였다. 또한, 저 연산의 로가리듬(Logarithm) 알고리즘을 사용한 얼굴 데이터의 조명 변화에 대한 정규화와 극 좌표계 변환 및 홍채 코드의 비트 이동 매칭에 의한 홍채 영역의 이동, 회전, 확대 및 축소에 대한 정규화를 통해 SVM의 분류 복잡도와 얼굴, 홍채 데이터의 본인 변화도를 최소화함으로써 인식 정확도를 향상시켰으며, 저 연산의 휴대폰 환경에서 정수혈 기반의 얼굴 및 홍채 인식 알고리즘을 사용하여 처리시간을 향상시켰다. 실험 결과, SVM을 사용한 인식의 정확성이 단일 생체(얼굴 또는 홍채), SUM, MAX, MIN 그리고 Weighted SUM을 사용하는 것보다 우수한 것을 알 수 있었다.

• 한국지구과학회지
• /
• 제38권2호
• /
• pp.105-114
• /
• 2017

Two dimensional finite element method with quadrilateral basis functions was applied to the spherical high order filter on the spherical surface limited area domain. The basis function consists of four shape functions which are defined on separate four grid boxes sharing the same gridpoint. With the basis functions, the first order derivative was expressed as an algebraic equation associated with nine point stencil. As the theory depicts, the convergence rate of the error for the spherical Laplacian operator was found to be fourth order, while it was the second order for the spherical Laplacian operator. The accuracy of the new high order filter was shown to be almost the same as those of Fourier finite element high order filter. The two-dimension finite element high order filter was incorporated in the weather research and forecasting (WRF) model as a hyper viscosity. The effect of the high order filter was compared with the built-in viscosity scheme of the WRF model. It was revealed that the high order filter performed better than the built in viscosity scheme did in providing a sharper cutoff of small scale disturbances without affecting the large scale field. Simulation of the tropical cyclone track and intensity with the high order filter showed a forecast performance comparable to the built in viscosity scheme. However, the predicted amount and spatial distribution of the rainfall for the simulation with the high order filter was closer to the observed values than the case of built in viscosity scheme.