• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.1
• /
• pp.1-15
• /
• 2011

The RLC systems is one of the intelligent transportation systems that has gained a nation-wide support for last decades and being installed to discourage motorists from running the red lights at signalized intersections. It is taken for granted that the RLC will provide motorists with increased safety, so that their installments are always justifiable. However, in order to acquire more efficiency and wider supports from the general public in future RLC installments, an improved methodology for analyzing the effects of the RLC systems is required. In order to satisfy this requirement, this research performed the following tasks. First, the number of signal violations after the RLC systems were investigated in order to check its resulting effects. Second, the number of crashes after the RLC systems were collected and compared with the number of signal violations. Third, a statistical analysis was carried out to develop the relationships between the signal violations and the crashes based on negative binomial distribution. The analysis revealed that the number of crashes has a close relationship with the RLC placement, traffic volume, vehicle speed, the number of phases, and the number of lanes for major approaches. Finally, based on the results found in this analysis, this research presents a methodology for analyzing the safety effects of placing the RLC that should be of service when investigating the economic consequences of the RLC systems.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1994.09a
• /
• pp.231-234
• /
• 1994

Concentrated stresses due to the tunnel excavation easily cause failure around opening in the soft rock mass layer. Thus, while excavatng tunnel in the soft rock mass layerm it is very important to predict the possibility of failure or yielding zones around tunnel boundary. There are two typical methods to predict these; 1) the analysis of field monioring data and 2) numerical analysis. In this study, it was attempted to describe the time-dependent or progressive rock mass manner due to the continuous failure and fracturing caused by surrounding underground openings using the second method. In order to apply the effects of progressive failure underground, an iterative technique was used with the Hoek and Brown rock mass failure theory. By developing and simulating, three different shapes of twin tunnels, this research simulated and estimated the proper size of critical pillar width between tunnels, distributed stresses on the tunnel sides, and convergences of tunnel crowns. Moreover, results out progressive failure technique based on the Hoek and Brown theory were compared with the results out of Mohr-Coulomb theory.

• Structural Engineering and Mechanics
• /
• v.20 no.6
• /
• pp.609-630
• /
• 2005

A reliability analysis method is proposed in this paper through a combination of the advantages of the response surface method (RSM), finite element method (FEM), first order reliability method (FORM) and the importance sampling updating method. The accuracy and efficiency of the method is demonstrated through several numerical examples. Then the method is used to estimate the serviceability reliability of cable-stayed bridges. Effects of geometric nonlinearity, randomness in loading, material, and geometry are considered. The example cable-stayed bridge is the Second Nanjing Bridge with a main span length of 628 m built in China. The results show that the cable sag that is part of the geometric nonlinearities of cable-stayed bridges has a major effect on the reliability of cable-stayed bridge. Finally, the most influential random variables on the reliability of cable-stayed bridges are identified by using a sensitivity analysis.

• Structural Engineering and Mechanics
• /
• v.22 no.3
• /
• pp.351-370
• /
• 2006

In this study, the earthquake damage response of the concrete arch dams was investigated including dam-reservoir interaction. A continuum damage model which is a second-order tensor and includes the strain softening behavior was selected for the concrete material. Fluid-structure interaction problem was modeled by Lagrangian approach. Sommerfeld radiation condition was applied to the truncated boundary of reservoir. The improved form of the HHT-${\alpha}$ time integration algorithm was used in the solution of the equations of motion. The arch dam Type 5 was selected for numerical application. For the dynamic input, acceleration records of the 10 December 1967 Koyna earthquake were chosen. These records were scaled with earthquake acceleration scale factor (EASF) and then used in the analyses. Solutions were obtained for empty and full reservoir cases. The effects of EASF and damping ratio on the response of the dam were studied.

• Structural Engineering and Mechanics
• /
• v.30 no.6
• /
• pp.763-785
• /
• 2008

In this study, a flexibility-based finite element method considering geometric and material nonlinearities is developed for analyzing steel-concrete frame structures. The stability functions obtained from the exact buckling solution of the beam-column subjected to end moments are used to accurately capture the second-order effects. The proposed method uses the force interpolation functions, including a moment magnification due to the axial force and lateral displacement. Thus, only one element per a physical member can account for the interaction between the bending moment and the axial force in a rational way. The proposed method applies the Newton method based on the load control and uses the secant stiffness method, which is computationally both efficient and stable. According to the evaluation result of this study, the proposed method consistently well predicts the nonlinear inelastic behavior of steel-concrete composite frames and gives good efficiency.

• English Language & Literature Teaching
• /
• v.11 no.1
• /
• pp.179-202
• /
• 2005

The purpose of this study is to examine whether the teacher feedback (TF) group and the peer feedback (PF) group exhibit significant differences in their English writing abilities and attitudes toward English writing. The subjects of this study are eighty-three college first-year students enrolled in a college English reading class. The subjects' first and final writing samples are used to measure the improvement of English writing abilities and a set of pretest and posttest questionnaires is administered in order to find their attitudes. The qualitative and quantitative analyses of the data collected show the following results. First, the two groups show no significant difference in their holistic scores. Neither do the two groups display any significantly different development in their analytic scores. Second, the two groups show no significant differences in attitude factors but writing confidence. These findings suggest that peer feedback can be used to encourage EFL college students to develop their writing abilities.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.375-378
• /
• 1997

This research deals with a problem of reconstructing 3D surface structures from their 2D projections, which is an important research topic in computer vision. In order to provide robust reconstruction algorithm, that is reliable even in the presence of uncertainty in the range images, we first present a detailed model and analysis of several error sources and their effects on measuring three-dimensional surface properties using the space encoded range imaging technique. Our approach has two key elements. The first is the error modeling for the space encoding range sensor and its propagation to the 3D surface reconstruction problem. The second key element in our approach is the algorithm for removing outliers in the range image. Such analyses, to our knowledge, have never attempted before. Experimental results show that our approach is significantly reliable.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2000.04b
• /
• pp.215-221
• /
• 2000

A simple numerical modeling technique is proposed for the analysis of framed tube structures with multiple internal tubes. The structures are analysed using a continuum approach in which each tube is individually modelled by a tube beam that accounts for the flexural and shear deformations, as well as the shear lag effects. By simplifying assumptions regarding the form of strain distributions in external and internal tubes, the structural behaviours is reduced to the solution of a single second order linear differential equation. The numerical analysis uses the variational approach on the basis of the minimum potential energy priniciple. Three framed-tube sructures with single, two and three internal tubes are analysed to verify the applicability and reliability of the proposed method.

• Steel and Composite Structures
• /
• v.5 no.2_3
• /
• pp.87-101
• /
• 2005

This paper describes of an overview to the strength rules in the Australian AS4100 Steel Structures Code that was first issued in Limit States Format in 1990. It focuses on pertinent and characteristic issues, such as the means of analysis for second order effects in frames, and highlights how the tiered approach may lead to efficient design using advanced analysis techniques. It also considers design against buckling in some detail, and shows how advanced solutions may be readily incorporated into the design rules. Implicit in the formulations are the necessity for ductility of the steel, and the scope of the code is limited to steels that display this necessary ductility characteristic.

• Advances in aircraft and spacecraft science
• /
• v.5 no.4
• /
• pp.445-458
• /
• 2018

Turbulent airflow in channels of rectangular cross section with symmetric centerbodies is studied numerically. Shock wave configurations formed in the channel and in front of the entrance are examined. Solutions of the unsteady Reynolds-averaged Navier-Stokes equations are obtained with finite-volume solvers of second-order accuracy. The solutions demonstrate an expulsion/swallowing of the shocks with variations of the free-stream Mach number or angle of attack. Effects of the centerbody length and thickness on the shock wave stability and flow bifurcation are examined. Bands of the Mach number and angle of attack, in which there exist non-unique flow fields, are identified.