• Proceedings of the KOSOMBE Conference
• /
• v.1989 no.05
• /
• pp.45-49
• /
• 1989

In this paper the feature of background EEG is extracted by LS Prony Method for the analysis of background EEG in the time domain. From the experimential results the alpha band amplitude is the largest among bands and beta band amplitude is larger than that of the delta band and theta band. The sustained time for the alpha band, the beta band, the delta band and the theta band is 2.3461(sec), 1.8980(sec), 0.3120(sec), 0.2930(sec) respectively. Consequently the alpha band and the beta band are maintained in the whole, segment. The delta band, the theta band are existed intermittently in the segment.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1996.03b
• /
• pp.48-54
• /
• 1996

The continuous deformation , multistage deformation and stress relaxation were carried out to investigate the strain induced procipitation by torsion tests in the range of 1000∼800$^{\circ}C$, 0.05/sec∼5/sec for V-microalloyed steel. The starting temperature and time for the initiation of precipitation were determined by stress relaxation tests and the distribution of percipitates increased at higher strain rate and the mean size of precipitates was found to be about 50nm. The precipitation starting time decreased with increasing strain rate from 0.05/sec to 5 /sec and pre-strain. The effect of deformation conditions on the no-recrystallization temperature(Tnr) was determined in the multistage deformation with declining temerature. The Tnr decreased with increasing strain and strain rae. In the controlled rolling, grain refinement and precpitation hardening effects could be achieved by the alternative large pass strain at the latter half pass stage under the condition of low temperature and high strain rate.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.275-278
• /
• 2003

지하터널과 같은 대규모 지하구조물 건설시 구조물의 안정성을 확보하고 시공성 등의 실시 설계를 위해서는 그 지역의 수리적 매개변수를 파악하는 것이 필수적이다. 부산광역시 북서부에 위치한 금정산 화강암지역의 수리상수를 산출하기 위하여 야외시험과 실내시험을 수행하였으며, 각각의 결과를 서로 비교 분석하였다. 야외에서는 6개의 시추공에서 수압시험을 수행하여 심도 구간별 수리전도도를 구하였고, 실내시험에서는 시추코아를 이용하여 절리투수시험을 실시하여 수리전도를 산출하였다. 수압시험에 의해 산정된 수리전도도는 2.28E-10 m/sec∼1.49E-06 m/sec 이며, 절리투수시험에 의해 산정된 수리전도도는 1.16E-11 m/sec∼3.26E-05 m/sec이다.

• Parasites, Hosts and Diseases
• /
• v.52 no.3
• /
• pp.317-319
• /
• 2014

The oocyst wall is severed by means of mechanical injury or chemical agents. This study reports the percentage of in vitro sporocyst release following mechanical shaking in the presence of varying sizes of glass beads. Glass beads measured 0.5, 1, and 3 mm in diameter and were shaken with the oocysts for different times ranging from 5 sec to 5 min. Approximately 80% of sporocysts were released with 5 min of shaking in the presence of 3 mm glass beads, as well as 30 sec with 0.5 mm beads and 1 mm glass beads. The release of sporocysts of E. tenella was most efficient using 1 mm glass beads and treatment times of 30 sec to 1 min. Therefore, the use of 1 mm glass beads with 30 sec to 1 min of agitation is recommended in order to maximize sporocyst release and recovery and to improve the yield of viable sporozoites for use in biochemical, tissue culture, and immunological applications of coccidia.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.7 no.4
• /
• pp.6-13
• /
• 1970

The variable-width and double-pulse generator Here described is completely transistorized so its size is small and it is convenient to handle. The frequency ran be varied from 1 KHz to 500KHz, the pulse width from 0.4$\mu$sec to 8$\mu$sec, amplitude from 1V to 10V, and interval of double pulse from 0$\mu$sec to 12$\mu$sec. Positive and negative signal or double pulse trains can he obtained. An analysis has been carried out for each stage and the design equations are derived. The experimental results are compared with the analysis.

• Structural Engineering and Mechanics
• /
• v.9 no.6
• /
• pp.519-540
• /
• 2000

In this study, a new functional based on the Reissner theory, for thick plates on a Winkler foundation is obtained. This functional has geometric and dynamic boundary conditions. In deriving the new functional, the $G{\hat{a}}teaux$ differential is used. This functional which is in polar coordinates is also transformable into the classical potential energy equation. Bending and torsional moments, transverse shear forces, rotations and displacements are the basic unknowns of the functional. Two different sectorial elements are developed with $3{\times}8$ degrees of freedom (SEC24) and $4{\times}8$ degrees of freedom (SEC32). The accuracy of the SEC24 and SEC32 elements together are verified by applying the method to some problems taken from literature.

• Journal of the Korean Ceramic Society
• /
• v.25 no.6
• /
• pp.585-592
• /
• 1988

Aluminum sec-butoxide was synthesized from aluminum foil and alcohol. The characteristics of the alumina powder prepared from the synthesized alkoxide by the Yoldas method were studied. As a result of measuring the synthesized aluminum sec-butoxide by GC, the purity of the synthesized alkoxide was 98.7% on the basis of commercial alkoxide and the yield was 78.5%. A127-MASNMR analysis shows that powders dried at 9$0^{\circ}C$ and $\alpha$-Al2O3 have 6-cordinated structure and ${\gamma}$-Al2O3 has 4-coordinated structure. The characteristics of alumina powder prepared from the synthisized alkoxide showed the same characteristics with the alumina powder prepared from the commercial alkoxide.

• Journal of The Korean Astronomical Society
• /
• v.4 no.1
• /
• pp.1-8
• /
• 1971

The average velocity, 330km/sec. of the high velocity stars with respect to the galactic center is obtained from the data used by Fricke on the assumption that the rotational velocity of the Local Standard of Rest is 250km/sec. Comparing this value with the escape velocity, 380km/sec, at the solar neighborhood which is calculated from Mestel's model of the Galaxy, it is shown that most of the high velocity stars are bound to the Galaxy and that their average apogalacticon is about 40 kpc from the galactic center. And the fact that stars with radial velocities larger than 63km/sec are missing in the direction of galactic rotation of L.S.R. is interpreted as the result partly of the random distribution of the directions of motion of the high velocity stars and partly of the observational errors.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.2
• /
• pp.31-39
• /
• 2001

본 연구에서는 수정 Cam Clay 모델과 혼합체 커플링 이론(coupled theory of mixtures)을 이용하여 피에조콘 관입시험을 해석하여 지반의 투수계수와 과잉간극수압의 정량적 관계를 고찰하였다. 본 연구의 이론적 해석 결과는 시험결과들과 비교하였으며 그 결과 피에조콘 관립 시험시 관측된 과잉간극수압은 지반의 투수계수가 $10^{-9}$m/sec에서 $10^{-6}$m/sec의 범위에서는 투수계수에 따라 피에조콘 관립 시험시 관측된 과잉간극수압이 현저하게 변하는 것으로 나타나 피에조콘 관입시험시 관측한 과잉간극수압을 이용하여 지반의 투수계수를 결정할 수 있음을 알 수 있었다. 또한 지반의 투수계수가 $10^{-9}$m/sec 이하에서는 지반이 거의 완전 비배수 상태에 가까운 거동을 나타내면, 투수계수가 $10^{-6}$m/sec 이상에서는 거의 완전 배수상태에 가까운 거동을 하는 것으로 나타났다.으로 나타났다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.5
• /
• pp.825-830
• /
• 2016

The purpose of this study optimizes the conditions of PLA printing material for 3D printer. Deltabot type 3D printer is used. The ranges of printing temperature, printing speed, and infill density are $195{\sim}215^{\circ}C$, 10~70mm/sec, and 10~100% respectively. From the results of printing temperature, printing quality is almost same every printing temperature. From the results of printing speed and infill density, printing quality is excellent under 40mm/sec, and over 50% respectively. Surface roughness is $2.28{\mu}mRa$ at $205^{\circ}C$, 10mm/sec, 100%, and is $5.93{\mu}mRa$ at $205^{\circ}C$, 70mm/sec. Surface roughness is directly proportional to the printing speed, and is inversely proportional to the infill density. Objects fabricated PLA printing material adhere bed at room temperature.