• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.5
• /
• pp.488-493
• /
• 2005

This paper presents a method of detecting rotor position for single phase Switched Reluctance Motors(SRMs) using a search coil. In the single phase SRM, mainly Hall effect sensors or photo interrupters have been used to detect the rotor position. But these sensors have many disadvantages. In this paper, low cost and robust characteristics of rotor position detection method are focused in order to compensate for disadvantage of existing sensors. Search coils wound around the stator pole are used for detection of the rotor position in single phase SRM. Rotor position detection is achieved through electromotive force patterns induced by time-varying flux linkage in the search coil. The simulation and experimental results are presented to verify the performance of the proposed method in this paper.

• Journal of Magnetics
• /
• v.21 no.4
• /
• pp.509-515
• /
• 2016

We report on development of a ground-based bi-axial Search-Coil Magnetometer (SCM) designed to measure time-varying magnetic fields associated with magnetosphere-ionosphere coupling processes. The instrument provides two-axis magnetic field wave vector data in the Ultra Low Frequency or ULF (1 mHz to 5 Hz) range. ULF waves are well known to play an important role in energy transport and loss in geospace. The SCM will primarily be used to observe generation and propagation of the subclass of ULF waves. The analog signals produced by the search-coil magnetic sensors are amplified and filtered over a specified frequency range via electronics. Data acquisition system digitizes data at 10 samples/s rate with 16-bit resolution. Test results show that the resolution of the magnetometer reaches $0.1pT/{\sqrt{Hz}}$ at 1 Hz, and demonstrate its satisfactory performance, detecting geomagnetic pulsations. This instrument is scheduled to be installed at the Korean Antarctic station, Jang Bogo, in the austral summer 2016-2017.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.6
• /
• pp.705-712
• /
• 2004

In this paper, detection of rotor position at standstill of toroidal switched reluctance motor(TSRM) with built-in search coils using neural network is proposed. When search coils are used as a position sensor, it has many advantages like low cost, decrease in the volume, high robust characteristics and wide applications. However, the initial rotor position detection is very difficult because the search coil's EMF doesn't exist at standstill. In this paper, detection of initial rotor position of TSRM with built-in search coils using neural network is suggested. The experiment for the proposed method are presented. As a result of that, the accuracy and validity of the proposed method is verified.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2009.12a
• /
• pp.220-221
• /
• 2009

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.681-685
• /
• 2003

In this paper, an sensing method of initial rotor position in Switched Reluctance Motor(SRM) at standstill is proposed. In case search coils are used as a position sensor, A search coil used in a method of detecting positions of TSRM has many advantages, which is highly efficient in low cost and maintenance free, and characterized by its function and role as a position sensor. However, the initial rotor position detection is very difficult because the search coil's EMF is not exist at a standstill. In this paper, a new sensing method of initial rotor position using squared Euclidean distance at a standstill too is suggested. The simulation and experiment for the proposed method are achieved. The validity of the proposed method is verified by experimental results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.4
• /
• pp.389-396
• /
• 2015

A coil design of pulse induction metal detectors has been described. The search coil was demonstrated by using the wire with the diameter of 0.3 mm, 0.5 mm and 1.0 mm and the dielectric plate with the $30cm{\times}30cm$ and $35cm{\times}35cm$, the time constant and the currents of the coil as the variation of the coil size and the number of coil turns was characterized. The coil parameters like the resistance, the inductance and the time constants as the variation of the diameter of the wire, the coil size and the number of coil turns were compared and analysed through the calculation and the measurement. In addition, investigating the coil currents as the variation of the input pulse width, the coil design of pulse induction metal detectors has been discussed.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.5
• /
• pp.205-213
• /
• 2001

This paper presents a virtual instrumentation(VI) system for LIMs performance on-line monitoring. The VI is designed using the graphical programming language LabVIEW and is capable of performing on-line measurement functions, including data acquisition, display, and analyses in the time and frequency domains, as well as data archiving. To monitor in real time the steady-state and transient electromagnetic thrust of LIMs, the search coil is used for the determination of the flux linkage components, which is then multiplied by the appropriate current components to yield a signal proportional to the electromagnetic thrust. This paper reports the LIM's dynamics measured by the proposed on-line monitoring system.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.4
• /
• pp.253-257
• /
• 2017

Nowadays, it is increasingly important to detect whether cables are live for the operator's safety if there is a sudden power failure. It is especially hard to detect the electrical field of an underground line because of shielding. This paper on detection of live-line states in cables studied the detection characteristics of the change in the magnetic field and axis as the frequency, voltage, and distance at the same load are changed using 3 axes. A search coil type was used as a magnetic field sensor with non-contact. We found that magnetic fields decrease proportionally to the square of the distance and the decrease of rated voltage with load effected to magnetic field. The magnetic field was detected by 3-axis sensors given correct proximity, but appeared as noise components beyond a distance of 2 cm.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.3
• /
• pp.95-101
• /
• 2000

In this paper, an improved method for magnetic inspection to detect surface of a conductor is presented. The presented method is based on the technique of ECP(Electric Current Perturbation), which is to measure the variation of current flow due to defects with a magnetic sensor. The inspection performance is improved by using high frequency current behaviors in order to concentrate the current near the defect and employing the resonant frequency of a search coil as an operating frequency. By analytical results and experiments of the test specimens, the feasibility of the inspection method is shown.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2007.05a
• /
• pp.313.1-313.1
• /
• 2007