• 복식문화연구
• /
• 제17권3호
• /
• pp.472-483
• /
• 2009

The purpose of this study is to analyse the effects of knit samples' mechanical properties on changes of skirt length of knit flared skirt, and to compare it to the knitting method of a seamless knitted flare skirt. So, I compared the appearance and 3-dimensional shape of a seamless knitted flare skirt with those of a fully cut knit flared skirt. For this study, 18 kinds of cut and sew or seamless knitted test garment were made. The data analysis methods used in this study were descriptive statistics, one-way ANOVA, correlation analysis, and regression analysis. The results are as follows: The result of the evaluation of knit samples' mechanical properties by the KES-FB system showed that elongation decreased as gauge increased and course direction was greatest among grain directions. The length change after wearing the knitted flare skirts appeared wholly equal to the seamless knitted, compared with the cut and sew. The change was biggest at $180^{\circ}$, 7G of the cut and sew. In grain direction, bias cut showed more than 1.2cm of length change. As the weight and thickness increased, the length changes become larger. The regression analysis indicated that the greatest contributive variables on the length changes were elongation, weight, and thickness.

• 한국통신학회논문지
• /
• 제36권1B호
• /
• pp.1-6
• /
• 2011

본 논문에서는 무선랜 시스템에서 이동 중에도 seamless streaming 서비스를 지원하기 위한 고속 핸드오프 알고리즘을 제안하였다. 기존의 무선랜 시스템에서 핸드오프 동안 seamless streaming 서비스를 지원하지 못하게 되는 문제점이 있기 때문에 이를 해결하기 위해 핸드오프 시작을 결정하는 임계값을 주변 무선 환경에 맞추어 자동으로 조정하는 알고리즘을 제안하였다. 제안된 알고리즘은 불필요한 스캐닝 동작을 하지 않으므로 핸드오프 지연 시간을 줄일 수 있다. 또한 특정 채널 군만을 스캐닝 하는 능동적인 스캐닝 과정을 통해서 핸드오프 지연 시간을 줄일 수 있다. 기존의 무선랜 시스템에서 이루어지는 핸드오프 과정과 제안한 고속 핸드오프 알고리즘을 적용한 시스템과의 비교 시험을 통해서 제안한 방식의 핸드오프 성능이 향상됨을 확인하였다.

• 한국공간정보시스템학회 논문지
• /
• 제2권1호
• /
• pp.17-27
• /
• 2000

기존에 제작되어 있는 수치지도를 이용해서 공간 데이타베이스를 구축할 때 타일 기반의 분리된 수치지도를 Seamless Map으로 다시 제작하는 과정은 필수적이다. 기존의 반복적인 합병 방법은 작업의 동시성이 떨어지는 문제점이 있다. 이 논문에서는 다수 작업자에 의한 작업의 동시성을 유지할 수 있도록 하는 변형된 2PC 프로토콜에 기반한 동시 합병 처리기의 구현에 대해 다루고 있다. 작업자들은 처리기를 통하여 서로 간의 작업을 공유할 수 있으므로 합의에 의한 합병 작업을 동시에 진행할 수 있다.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2006년도 하계학술대회
• /
• pp.47-52
• /
• 2006

In this paper, we suggested new network architecture to provide seamless service between the cellular system and new wireless broadband network such as IEEE 802.16e, called WiBro. The interworking technologies are very important issue because mobile operator should provide service connectivity between various wireless networks based on different access technologies. Moreover a change and modification on legacy network should be minimized for providing interworking with new wireless broad-band network. We implemented proposed interworking architecture between 3G cellular network and 802.16e network to provide seamless service including interworking unit in real test environment. Also, we performed performance evaluation in hybrid network environments.

• 소성∙가공
• /
• 제20권8호
• /
• pp.562-567
• /
• 2011

This paper deals with effects of certain important factors in a tube drawing operation, such as the use of a mandrel, die radius and tangential angle at die outlet, on the deformation behavior of a small-diameter seamless tube. Both experimental and finite element simulation studies are carried out to assess the effects of the above parameters. Experiments and finite element predictions are compared. The use of a mandrel simplifies the design of tube drawing, but also induces some difficulties from increased process complexity. The effects of die outlet tangential angle and radius are discussed in detail.

• 소성∙가공
• /
• 제20권8호
• /
• pp.611-618
• /
• 2011

Flow forming is an incremental forming process in which rollers are used to form cylindrical parts with repeated turning of both roller and starting material. Both sheet and tube can be used as the starting material. The process is highly useful for producing hollow shaped parts from a tube, with the benefit of the average strain in the final shape being significantly lower than that from a sheet material. In the present study, the flow forming process was studied and optimized for producing a hollow shaped part from seamless steel tube by both experiment and numerical analysis. Upon considering the difficulty of forming seamless steel sheet, the thickness reduction was distributed over several tool paths. In the end, an optimum process condition was attained, and the experiment verified the simulation results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 추계학술대회
• /
• pp.66-67
• /
• 2010

마이크로그리드 또는 발전용 연료전지 시스템과 같이 계통 이상 시 독립운전으로의 모드전환이 필요한 응용에서 과도현상을 최소화하는 Seamless Transfer 기술이 필수적이다. 모드전환 시 전압제어를 유지함으로서 이러한 과도상태를 최소화할 수 있는 간접전류제어 알고리즘이 제안된 바 있다. 그러나 제어기 모델에 의한 해석이 불가능하므로 제어 파라미터 설정이 어려운 단점이 있었다. 본 논문에서는 인버터의 모델을 고려하여 제어기를 해석함으로서 원하는 제어대역폭과 위상마진을 갖는 제어기의 게인 설정을 가능하게 하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 추계학술대회
• /
• pp.151-152
• /
• 2018

본 논문에서는 병렬연결 인버터의 seamless mode transfer를 위한 제어기 설계를 수행하였다. 인버터의 경우 계통연계 모드에서는 전류원으로 동작하기 때문에 간접전류를 기반으로 제어를 실행하였고, 단독 운전에서는 인버터가 전압원으로 간주되기에 전압 제어가 필요하다. 또한 여러 대의 분산 발전원에 대해 동일 부하 분담을 위해 드룹제어를 이용하였다. 이러한 제어기들은 PR제어를 기반으로 하여 특정 주파수에 높은 이득을 가지게 하여 제어효율을 향상시켰다. 모드 변환 과정에 있어 전압의 변동을 최대한 줄이기 위한 제어 계획을 수립하였고, 이를 Psim 시뮬레이션으로 증명하였다.

• Journal of Power Electronics
• /
• 제16권5호
• /
• pp.1821-1832
• /
• 2016

This study presents a strategy using the synchronized output regulation method (SOR) for controlling inverters operating in stand-alone and grid-connected modes. From the view point of networked dynamic systems, SOR involves nodes with outputs that are synchronized but also display a desirable wave shape. Under the SOR strategy, the inverter and grid are treated as two nodes that comprise a simple network. These two nodes work independently under the stand-alone mode. An intermediate mode, here is named the synchronization mode, is emphasized because the transition from the stand-alone mode to the grid-connected mode can be dealt as a standard SOR problem. In the grid-connected mode, the inverter operates in an independent way, in which the voltage reference changes for generalized synchronization where its output current satisfies the required power injection. Such a relatively independent design leads to a seamless transfer between operation modes. The closed-loop system is analyzed in the state space on the basis of the output regulation theory, which improves the robustness of the design. Simulations and experiments are performed to verify the proposed control strategy.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제9권3호
• /
• pp.198-205
• /
• 2009

In this paper, design of framework architecture of pervasive computing system providing seamless inter space interactions between private and public smart spaces is presented. The seamless inter space interaction issues are related to establishing user's service environment by allocating relevant resources in a new location where there are no prior settings for the user or where there are current users already being served in the new location. In the realm of pervasive computing, we can have different types of smart spaces, offering proactive and intelligent services, which are islands of smart spaces independent from each other. As users move about, they will have to roam from private smart space to public smart space and vice versa. When they enter a new island of smart space, they will have to setup their devices and service manually to get the same or different services they had at the previous location. Users might be living in a non-pervasive computing environment because this manual operation is inappropriate to its generic features of proactive and intelligent services of pervasive computing. The framework architecture will provide seamless inter space interactions initiated by changes in users' location to acquire negotiations of resources for new and current residents regarding service provision with limited available networked devices.