• Journal of the Korean Society of Costume
• /
• v.51 no.1
• /
• pp.33-48
• /
• 2001

This study is on the sewing construction of the 17th century clothing through the Excavated Costumes in O-chang, ChungBuk in 1998. The followings are the results of this study. There are various sewing constructions in this excavates costume : a running stitch.a back stitch.a half back stitch.a french seam.a gobsol(korean traditional seam sewing). We can see that the sewing construction of the 17th century-clothing depends on construction styles : one layer, two layers, clothing padded with cotton(include quilt). We can see that sewing construction in the one taler clothing consisted of a running stitch, a french seam, a gobsol seam. In the two layer clothing the construction included a running stitch and half back stitch. a running switch and a decorated top stitch(3stitch) were used in the clothing padded with cotton. We can see that the sewing construction enhanced the function of keeping the shape of clothing and the raw edges. We can see that the shape of clothing is important in presentation of aesthetic of the clothing. Such a kind of sewing construction lasted from the early Chosen Dynasty through the 17th century.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.7 s.184
• /
• pp.59-66
• /
• 2006

In laser welding, automatic seam tracking is important to adjust the laser head position in real time as it moves along the seam. Also if the joint gap is occurred, filling the missing material into the joint gap is necessary to prevent welding defects and bad welding quality. In general, the joint gap width is not constant along the seam due to a variety of reason. So it is essential to control the filler wire speed into the joint gap to acquire good welding quality. This paper describes an intelligent filler wire feeding device which can control 3-dimensional seam tracking and the filler wire speed by measuring the gap position and the joint gap width in laser welding. We call this device as Smart Micro Control system(SMC). To achieve this objective, we assessed weld quality in 2mm sheets of A16061 which had various gap width by using the developed device. From the experimental results, It was found the possibility that the developed device could be used in welding various 3-dimensional structures.

• Journal of Welding and Joining
• /
• v.16 no.3
• /
• pp.55-63
• /
• 1998

Among the position sensing methods available, the arc sensor which utilizes the electrical signal obtained from the welding arc itself is one of the most prevalently used methods, because it has an advantage that no particular sensing device is necessary and real-time sensing of a groove position is possible directly under the arc. The authors have already developed a seam tracking system that contains a new arc sensor algorithm, which uses the relative welding current variation according to the tip-to-workpiece distance in GMA welding. In this study a torch height control algorithm for automatic weld seam tracking was proposed for completing the previous system, which uses an on-off control technique. To implement the torch height control algorithm during weld seam tracking the system parameters which include 2nd averaging range, weighting factor for 2nd moving averaging, and Z-directional basic compensation distance were determined by experimental analysis. Finally the two different height control methods, one is simple on-off control and the other on-off control using a reference current value , were compared in their tracking abilities.

• Corrosion Science and Technology
• /
• v.18 no.1
• /
• pp.16-23
• /
• 2019

Steels for automotive fuel tank require unique properties such as corrosion resistance for fuel, welding for joining, forming for press, and painting for exterior. Recently, automakers have been requiring excellent seam weldable steels to enhance manufacturing productivity of fuel tank. Thus, POSCO developed a new type of functional steels coated with nano-composite thin layer on Zn-Ni plating steels. The nano-composite coating solution was prepared by mechanical fine dispersion of solutions consisting of polymeric resin and nano-composite materials in aqueous media. The composite solution was coated on the plating steel surface by using roll coater and cured through induction furnace. These new developed plating steels were evaluated for quality performances such as seam and spot weldability, press formability, and corrosion resistance. These new functional steels coated with nano-composite layer exhibited excellent seam weldability and press formability. Detailed discussion of coating solution and experimental results suggest that nano-sized composite dispersion as coating layer plays a key role in enhancing the quality performance.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.1095-1099
• /
• 1992

THIS REPORT PRESENTS THE MAIN CIRCUIT CONFIGURATION AND OPERATING PRINCIPLE ON THYRISTORIZED CURRENT SOURCE INVERTER TO PUT LOAD RESONANCE CONCEPT TO PRACTICAL USE APPLICABLE TO INDUCTION SEAM ANNEALLER, 500KW CAPACITY AND ADJUSTABLE FREQUENCY RANGE OF 1 TO 3KHZ, TOGETHER WITH WAVE OF SIMULATION AND ACTUAL TEST RESULT.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.03a
• /
• pp.222-225
• /
• 1997

This paper describes experimental investigation on the forming limit for mash-seam welded sheets. The uniaxial tensile test was conducted to evaluate the mechanical properties of weld bead. Experimental forming limit diagrams were investigated for the different thicknesses and properties of welded sheets.

• International Journal of Korean Welding Society
• /
• v.4 no.1
• /
• pp.30-37
• /
• 2004

There have been continuous efforts on automating welding processes. This automation process could be said to fall into two categories, weld seam tracking and weld quality evaluation. Recently, the attempts to achieve these two functions simultaneously are on the increase. For the study presented in this paper, a vision sensor is made, a vision system is constructed and using this, the 3 dimensional geometry of the bead is measured on-line. For the application as in welding, which is the characteristic of nonlinear process, a fuzzy controller is designed. And with this, an adaptive control system is proposed which acquires the bead height and the coordinates of the point on the bead along the horizontal fillet joint, performs seam tracking with those data, and also at the same time, controls the bead geometry to a uniform shape. A communication system, which enables the communication with the industrial robot, is designed to control the bead geometry and to track the weld seam. Experiments are made with varied offset angles from the pre-taught weld path, and they showed the adaptive system works favorable results.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.844-847
• /
• 2002

본 논문에서는 단상 thyristor 정류기 구조의 대전력 150KVA급의 mash seam 용접기에 용접 센터링등 여러 가지 용접 효율 향상을 위한 부가 장치를 포함한 용접장치 개발을 통한 용접품질 분석결과를 보이고 있다. 일반적으로 제철소에 사용되는 수10KVA급의 용접기들은 그동안 전량 수입에 의존하던 것을 공동연구를 통해서 국산화에 성공하였다. 본 시스템은 기존의 타사제품의 기능을 포함하여 용접 센터링 장치, 용접 전후단 의 크램핑기능, 선후행 코일의 선단부를 절단하는 shear ing 기능, 용접 휠높이 자동조절기능을 포함하였으며, 자체 설계된 대전력용 변압기, 대전력 절환용 thyristor 제어들을 포함한 용접기로써 기존의 타사제품에 비하여 기능적, 성능적으로 향상된 형태로써 용접 성능 검사에서도 양호한 결과 얻었다. 본 논문에서는 mash seam 용접기의 기본적인 기능설명과 개된 용접기를 기능별로 설명하고, 실용접 결과를 소개하여 향후 계획을 제시한다

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.950-955
• /
• 2005

This paper describes an intelligent filler wire feeding device which can control 3- dimensional seam tracking and the filler wire speed by measuring the gap position and the joint gap width in laser welding. By means of visual sensor controlled filling the missing material into the joint gap and 3 dimensional seam tracking, lineup errors from manufacturing tolerances and the repeatability of lineup jigs and weld robot can be balanced and at an even seam quality which avoids weld defects. In this paper, we assessed weld quality in 2mm sheets of A16061 which had various gap width by using the intelligent filler wire feeding device.

• Journal of Welding and Joining
• /
• v.21 no.1
• /
• pp.60-65
• /
• 2003

At present. welding of most pipes with large diameter is carried out by the manual process. Automation of the welding process is necessary f3r the sake of consistent weld quality and improvement in productivity. In this study, two vision sensors, based on the optical triangulation, were used to obtain the information for seam tracking and detecting the weld defects. Through utilization of the vision sensors, noises were removed, images and 3D information obtained and positions of the feature points detected. The aforementioned process provided the seam and leg position data, calculated the magnitude of the gap, fillet area and leg length and judged the weld defects by ISO 5817. Noises in the images were removed by using the gradient values of the laser stripe's coordinates and various feature points were detected by using an algorithm based on the iterative polygon approximation method. Since the process time is very important, all the aforementioned processes should be conducted during welding.