• 한국지하수토양환경학회지:지하수토양환경
• /
• 제7권1호
• /
• pp.41-51
• /
• 2002

최근 국내 폐기물 매립지는 대규모의 부지를 조성할 수 있는 해안의 점토지반 상에 시공되고 있으며 차수층의 강도증진과 차수층 바닥을 통한 침출수의 유출을 방지하기 위해 시멘트 고화 차수재를 많이 사용하고 있다. 그러나 점토 차수층에 비해 큰 강성을 가지고 있는 시멘트 차수층은 매립되는 쓰레기 하중에 따라 침하가 동반되고, 부등 침하가 발생할 경우 차수층에 균열이 발생될 수 있다. 본 연구에서는 폐기물 침출수의 유출을 방지하기 위해 Go매립지 점토를 혼합하여 만든 자가형성(Self-Sealing) 및 자가치유(Self-Healing) 차수층의 적용성을 평가하기 위해 삼축투수시험과 일축압축시험을 실시하였으며, 국내에 폭 넓게 분포하는 화강풍화토를 혼합하여 SSSH 차수층을 시공할 경우, 본 공법이 적용 가능한지를 평가하기 위해 자가형성(Self-Sealing)에 대한 시험을 실시하였다. 그 결과 점토가 혼합된 SSSH 차수재의 투수계수는 폐기물 관리법에서 요구하는 기준치보다 작은 값을 갖고 있었으며 일축압축강도 역시 증가되는 경향을 나타내었고, 화강풍화토와 벤토나이트가 혼합된 SSSH 차수재는 점토만을 사용한 경우보다 좋은 개량효과를 보였다.

• Geomechanics and Engineering
• /
• 제25권4호
• /
• pp.295-302
• /
• 2021

Cross-borehole electrical resistivity tomography (ERT) is an effective groundwater detection tool in geophysical investigations. In this paper, an artificial water injection test was conducted on a small clay sample, where the high-resolution cross-borehole ERT was used to investigate the moisture migration law over time. The moisture migration path can be two-dimensionally imaged based on the relationship between resistivity and saturation. The hydraulic conductivity was estimated, and the magnitude ranged from 10^-11 m/s to 10^-9 m/s according to the comparison between the simulation flow and the saturation distribution inferred from ERT. The results indicate that cross-borehole ERT could help determine the resistivity distribution of small size clay samples. Finally, the cross-borehole ERT technique has been applied to investigate the self-sealing characteristics of clay.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅳ
• /
• pp.2403-2406
• /
• 2003

When viewing images, the relative luminance of the surround has a profound impact on the apparent contrast of the image. The dark surround causes the image elements to appear lighter than those viewed in an illuminated surround. For this reason, it is worthwhile to briefly review the general results of brightness sealing under a various viewing condition. Two of the most often cited parers on the topic of brightness scaling are Stevens-stevens and Bartleson-Breneman's function. There are, however, significant differences between the perceptual functions for simple-field and complex-field viewing. In this paper, we research the relationship between Steven's power law and Bartleson-Breneman's function. We present an appropriate brightness perception function due to TV system viewing conditions. Highlight luminance peak and absolute brightness threshold value in various adaptation levels are obtained from the proposed brightness function . Also, the luminance value of black level to produce the same contrast ratio with variety of display highlight luminance peak is obtained from the proposed brightness function.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.800-805
• /
• 2001

Both analytical and experimental studies are presented to investigate the strength of the membrane which is designed by Kogas and will be used as a sealing for a LNG tank. Kogas has already developed the Ring-Knot type membrane, but new type had yet to be developed. This paper reports on the results of investigations into this new type of membrane. Various theorical analyses using FEM and experiments are conducted on the basis of RPIS, and it is found that the RPIS is fully satisfied.

• Journal of Communications and Networks
• /
• 제13권5호
• /
• pp.511-517
• /
• 2011

The capacity of wireless ad-hoc networks is analyzed for all kinds of information dissemination based on single and multiple packet reception schemes under the physical model. To represent the general information dissemination scheme, we use (n, m, k)-cast model [1] where n, m, and k (k ${\leq}$ m) are the number of nodes, destinations and closest destinations that actually receive packets from the source in each (n, m, k)-cast group, respectively. We first consider point-to-point communication, which implies single packet reception between transmitter-receiver pairs and compute the (n, m, k)-cast communications. Next, the achievable throughput capacity is computed when receiver nodes are endowed with multipacket reception (MPR) capability. We adopt maximum likelihood decoding (MLD) and successive interference cancellation as optimal and suboptimal decoding schemes for MPR. We also demonstrate that physical and protocol models for MPR render the same capacity when we utilize MLD for decoding.

• 유기물자원화
• /
• 제24권4호
• /
• pp.21-29
• /
• 2016

서울시 25개 자치구가 운영하는 생활폐기물 적환시설을 대상으로 시설의 기능, 지역 친화성, 규범 순응성 등의 3개 영역에 대해 현황을 분석하고 개선방안을 모색하였다. 65개 적환장 중 46개소는 매일 반출이 필요한 대량폐기물을, 19개소는 3~30일 범위에서 체류 후 반출되는 소량폐기물을 다루었다. 57%의 시설이 주거지역과 상업지역에 설치되어 있었다. 또한 57%의 적환장은 나대지 위에 장비만 두고서 적환작업을 하였다. 79%의 적환장은 재활용선별장 같은 시설과 근접하지 않고 독립적으로 존재했다. 도시계획법의 의한 환경기초시설로 지정된 경우는 17%에 불과했고, 폐기물관리법의 규정대로 허가받은 수집 운반업자가 운영하는 적환장은 31% 수준이었다. 적환장은 그 역할에서 시설 최적화, 자원화 확대 같은 정부의 폐기물관리 정책과 부합하였으나 주거지역이나 상업지역 같은 도심에 입지하기에는 환경대책이 미흡하고 규범과 불일치하는 면이 있었다. 앞으로 적환장이 도심의 환경기초시설로 자리매김하려면 건물 밀폐화, 기능의 종합화 등의 과제를 풀어야 한다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.745-750
• /
• 2009

In Korea, since the implementation of the GMO Law, the intrest of biosafety level 3(BL3) lab. is increasing. In this study, using CONTAM which is applying multizone modelling, the multizone simulation for design verification of BL3 lab. was performed. In BL3 lab., because required air change rate is greater than general estimated air-conditioning load and it is difficult to maintain room pressure difference efficiently, to maintain pressure difference between laboratory rooms is important through sealing condition of doors and proper airflow control of laboratory rooms. In this study, about BL3 lab.(M. tuberculosis research lab.), the multizone simulation for four kind of biohazard scenarios was performed in the case of unexpected spread of contaminants in the laboratory room, anteroom, corridor and inside of BSC. Multizone simulation results show that these approach methods are used as a tool for the design and verification of BL3 lab.

• 설비공학논문집
• /
• 제21권12호
• /
• pp.671-677
• /
• 2009

In Korea, since the implementation of the LMO Law, the interest of biosafety level 3(BL3) lab. is increasing. In this study, using CONTAM which is applying multizone modelling, the multizone simulation for design verification of BL3 lab. is performed. In BL3 lab., because required air change rate is greater than general estimated air-conditioning load and it is difficult to maintain room pressure difference efficiently, to maintain pressure difference between laboratory rooms is important through sealing condition of doors and proper airflow control of laboratory rooms. In this study, about BL3 lab,(M. tuberculosis research lab.), the multizone simulation for four kind of biohazard scenarios is carried out in the case of unexpected spread of contaminants in the laboratory room, anteroom, corridor and inside of BSC. Multizone simulation results show that these approach methods are used as a tool for the design and verification of BL3 lab.

• 한국철도학회논문집
• /
• 제11권1호
• /
• pp.7-12
• /
• 2008

본 연구에서는 경사각에 다른 임계속도 변화를 파악하기 위하여 축소모형 실험을 수행하였다. Froude 상사를 사용하여 1/20 축소모델 시험을 수행하였고, 화원은 메탄올, 아세톤, 헵탄을 연료로하여 Akinson과 Wu가 사용한 가스버너가 아닌 배연속도에 따라 달라지는 정사각형 풀을 사용하였으며, 터널의 각도는 $0^{\circ}$, $2^{\circ}$, $4^{\circ}$, $6^{\circ}$, $8^{\circ}$에 관하여 실험을 수행하였다. 발열량과 온도는 로드셀과 K-type 열전대를 사용하여 측정하였다. 실험결과 발열량 변화를 고려하지 않은 Atkinson과 Wu의 실험결과 보다 배연속도에 따른 발열량이 변화하는 풀화재를 사용한 경우가 더 큰 기울기 값을 얻었다. 따라서 배연속도는 화원의 연소율 변화에 직접적으로 영향을 미치기 때문에 경사터널화재 발생시 연소율의 변화에 따른 임계속도의 영향을 고려하는 것이 중요하다.

• Tribology and Lubricants
• /
• 제35권4호
• /
• pp.222-228
• /
• 2019

As rubber products such as O-rings, which are also known as packings or toric joints, come in regular, long term contact with liquid fuel, they can eventually swell, become mechanically weakened, and occasionally crack; this diminishes both their usefulness and intrinsic lifetime and could cause leaks during the steady-state flow condition of the fuel. In this study, we evaluate the lifetime of such products through compression set tests of FKM, a family of fluorocarbon elastomer materials defined by the ASTM international standard D141; these materials have great compression, sunlight, and ozone resistance as well as a low gas absorption rate. In this process, O-rings are immersed in the liquid fuel of airtight containers that can be expressed as a compression set, and the liquid fuel leakage in a flow rig tester at variable temperatures over 12 months is investigated. Using the Power Law model, our study determined a theoretical O-ring lifetime of 2,647 years, i.e. a semi-permanent lifespan, by confirming the absence of liquid fuel leakage around the O-ring assembled fittings. These results indicate that the FKM O-rings are significantly compatible for fuel tests to evaluate long-term sealing conditions.