• Journal of Korea Foundry Society
• /
• v.20 no.4
• /
• pp.277-282
• /
• 2000

The RP&M (Rapid prototyping and Manufacturing) is the most appropriate technology for the small-lot production system, in which the production cycle is getting shorter owing to various needs from consumers. In this paper, RP&M is applied to a casting process. A casting process has a merit of being able to reflect complicated shapes at one time. But it has not been applied to the precision industry because of bad quality on surface. So we will improve characteristics of aluminum casting process using vacuum sealed casting process and porous ceramic mold which is made by slurry casting process.

• Structural Engineering and Mechanics
• /
• v.33 no.3
• /
• pp.339-355
• /
• 2009

The sealed, tuned liquid column gas damper (TLCGD) with gas-spring effect extends the frequency range of application up to about 5 Hz and efficiently increases the modal structural damping. In this paper the influence of several TLCGDs to reduce coupled translational and rotational vibrations of plan-asymmetric buildings under wind or seismic loads is investigated. The locations of the modal centers of velocity of rigidly assumed floors are crucial to select the design and the optimal position of the liquid absorbers. TLCGD's dynamics can be derived in detail using the extended non-stationary Bernoulli's equation for moving reference systems. Modal tuning of the TLCGD renders the optimal parameters by means of a geometrical transformation and in analogy to the classical tuned mass damper (TMD). Subsequently, fine-tuning is conveniently performed in the state space domain. Numerical simulations illustrate a significant reduction of the vibrations of plan-asymmetric buildings by the proposed TLCGDs.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.2
• /
• pp.110-114
• /
• 2020

In this paper, a heat pump using a Peltier device was developed for heat dissipation in a sealed electric box. The heat pump was designed with a cooling fin attached to both sides of the Peltier device, and a fan was mounted on the cooling fin on the hot side to increase the efficiency. The heat dissipation efficiency could be improved by directly connecting the electronic component having high heat to the cooling fin using a heat conducting wire. The fabricated heat pump was designed to operate only in the temperature range set by the temperature control system to improve the problem of high power consumption of the Peltier element.

• Fibers and Polymers
• /
• v.5 no.4
• /
• pp.316-320
• /
• 2004

Waterproof fabrics are seamed and sealed by waterproof sealing tape to prevent water from penetrating through the stitch holes. As this process may change the mechanical properties of breathable waterproof fabric related to its deformation with human body, the changes in mechanical properties were investigated. In both of parallel and perpendicular directions, tensile characteristics were remarkably changed with seaming and sealing processes. The increase of LT and WT means that the clothing sealed by waterproofing tape may produce somewhat discomfort feeling. On the other hand, the bridge of the sewing thread seemed to be reinforced by waterproofing tape. Shear characteristics such as G, 2HG, and 2HG5 gradually increased with seaming and sealing processes in parallel direction. However, they decreased with sealing process in perpendicular direction because the seam line would work as an axis located at the center of the testing range.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1692-1694
• /
• 2003

펄스파워 시스템의 핵심은 스위치로서 현재까지 상당히 많은 종류가 개발되어 왔다. 이들 스위치는 구조 및 성능에 따라 장단점이 다르므로 목적에 적합한 시스템을 고려해 선택하여 사용되어 왔다. 일예로 펄스폭이 긴파형의 전류는 아크를 소화할수 있는 장치가 필요하다. 따라서 본 논문에서는 진공중의 두전극 (anode - cathode)을 나선형으로 제작하여 실험 하였다. 이방식은 결과적으로 아크를 회전시켜서 소호를 시키는 방식을 이용하였는데 전극의 수명을 연장시키는 효과를 얻을수 있었다.

• Applied Biological Chemistry
• /
• v.32 no.3
• /
• pp.265-269
• /
• 1989

Effects of air-tighteness of packing material and aluminum phosphide fumigation on mortality of rice weevil were studied during rice storage. Air-tight storage of rice in sealed bag of 0.1mm PE film or sealed glass bottle reduced the deterioration of rice quality and killed all rice weevils after 60 days storage, while paper bag, PP bag and straw bag storage kept them alive. One tablet of aluminum phosphide in one cubic meter heap of rice packed in PP bag was sufficient to kill all rice weevil in it, when the heap was covered by 0.15 mm PE film during fumigation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.296-297
• /
• 2013

We have investigated correlation between airtightness measured by blower door and airborne sound insulation measured in the upper and lower units. We consist of two cases : all windows sealed(CASE 1) and not sealed(CASE 2). As a result, CASE 1 is tighter than CASE 2 in airtightness, but CASE 1 is lower than CASE 2 in sound level difference. This is because of big wind on measuring CASE 1. Thus we are going to measure them at another fields considering this factor. Finally we ought to find out the correlation between airtightness and sound insulation.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.9
• /
• pp.1005-1009
• /
• 1999

Wustite with NaCl structure is successfully synthesized in a quartz tube sealed under vacuum ( ≒1×10 -3 torr). Hematite in an evacuated quartz tube progressively loses oxide ion at 1373 K. XRD patterns disclose that α-Fe2O3 is transformed into the Fe3O4 after heat treatment at 1373 K for 32 h, and the poorly crystallized FeO is appeared after heat treatment for 48 h. Finally, α-Fe2O3 is completely transformed into the well crystallized Fe 0.935O after heat treatment for 84 h. The electrical resistivity, ac-susceptibility measurement, Mossbauer spectroscopy, and x-ray absorption spectroscopy corroborate the structural phase transition on the iron oxides prepared in a sealed quartz tube depending on the heating time at 1373 K.

• Korean Journal of Radiology
• /
• v.1 no.4
• /
• pp.208-211
• /
• 2000

We present a case in which an arterial rupture occurring during embolization of an arteriovenous malformation of the left occipital lobe with a flow-directed microcatheter, was successfully sealed with a small amount of glue. We navigated a 1.8-Fr Magic catheter through the posterior cerebral artery, and during superselective test injection, extravasation was observed at the parieto-occipital branch. The catheter was not removed and the perforation site was successfully sealed with a small amount of glue injected through the same catheter. Prompt recognition and closure of the perforation site is essential for good prognosis.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.05a
• /
• pp.430.1-430
• /
• 2001