• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2003년도 International Symposium on Clean Environment
• /
• pp.37-42
• /
• 2003

We have analyzed the characteristics of the sea surface winds and wind waves near the Korean marginal seas on the basis of prediction results of the sea surface winds from MM5/KMA model, which is being used for the operation system at the Korea Meteorological observation buoy data to verify the model results during Typhoon events. The correlation coefficients between the models and observation data reach up to about 95％, supporting that these models satisfactorily simulate the sea surface winds and wave heights even at the coastal regions. Based on these verification results, we have carried out numerical experiments about the wave modulation. When there exist an opposite strong current for the propagation direction of the waves or wind direction, wave height and length gets higher and shorter, and vice versa. It is proved that these modulations of wave parameters are well generated when wind speed is relatively week.

• 한국지반환경공학회 논문집
• /
• 제12권7호
• /
• pp.67-76
• /
• 2011

본 연구에서는 방조제의 피복석에 파랑이 작용하는 경우에 대한 거동특성을 평가하고자 하였다. 파랑은 방조제 또는 호안구조물에 충격하중으로 작용하게 되며, 충격하중이 작용하는 동안 호안구조물은 침식과 부분 붕괴로 인한 급경사지가 발생하게 된다. 또한, 충격하중은 피복석에 마모를 발생시킨다. 방조제는 국내에서 1970년대 이래로 해안가 산업기반시설의 보호를 위해 널리 이용되고 있다. 방조제는 주로 준설모래와 사석 그리고 피복석으로 구성되며, 피해 유형은 1970년대부터 보고되었으나 파랑작용과 피복석의 상호작용에 대한 연구는 아직까지도 충분하지 않은 실정이다. 방조제 피복석의 가장 큰 피해유형은 마모이지만, 이에 대한 연구 역시 충분하지 못한 실정이다. 따라서 본 연구에서는 호안구조물에 파랑이 작용하는 경우 발생하는 충격하중과 피복석의 상호관계를 분석하였다. 방조제에 작용하는 파랑하중을 고려하여 수치해석을 수행하였으며, 파랑하중의 규모와 주기에 따른 피복석의 거동특성을 분석하였다. 또한, 파랑하중으로 인해 발생하는 방조제의 변위증가를 평가하였다.

• 한국해양환경ㆍ에너지학회지
• /
• 제15권3호
• /
• pp.177-185
• /
• 2012

본 논문은 완도 금일읍 주변 해역의 내습 파랑 공간분포를 살펴보기 위해 18일간 현장 파랑관측을 실시하고 이를 외해 거문도 해양관측부이 자료와 비교하였으며, 수치모의를 통해 심해 설계파 및 계절별 평상 파랑 내습에 따른 양식장 주변의 입사파고 분포를 고찰하였다. 이를 통해 얻어진 결과를 요약하면 다음과 같다. (1) 현장 파랑관측을 실시한 결과, 최대파고와 유의파고의 관계식 $H_{max}=1.6H_{1/3}$에 근접하는 파랑이 다수를 나타내었다. (2) 외해 입사 파랑에너지가 연안까지 도달함에 있어서 바람의 방향에 따라서 크게 영향을 받고 있으며, N계열의 풍향은 입사 파랑에너지의 감소에, S계열 풍향은 입사파랑에너지 전달에 영향을 주고 있음을 알 수 있었다. (3) 금일읍(평길도와 생길도) 전면해역에서 최대 심해설계파고가 4~5 m이며 파고감소율은 약 38.1~47.6%, 평상파랑의 경우 하계 3.6~4.0 m, 동계 2.3~2.7 m로 나타나 파고감소율은 41.8~49.1%에 해당하였다. (4) 평길도와 생길도 남측의 경우 해양파랑의 영향이 가장 크고, 섬의 북측 청도 수도 해역이 가장 정온한 상태를 나타내었으며, 두 해역간 유의파고비는 약 6배의 차이를 나타내었다.

• 한국항해학회지
• /
• 제15권1호
• /
• pp.49-65
• /
• 1991

It is of great importance for any vessel under way, especially in rough sea, to be maneuvered safely with proper seakeeping performance. In this paper, the author aims to develope a navigational safety evaluation system in rough sea by analyzing ship's with the theory of wave spectrum using random process analysis and the theory of evaluating the seakeeping performance. The scope and the method of this study are as follows ; (1) Modelized typhoon mathematically to represent the sea condition in rough sea. (2) Estimated sea conditions by getting wave spectrum, supposing that the wave by typhoon is fully developed short crest irregular wave. (3) Defined evaluation factor of vessel's seakeeping performance and obtained response amplitude operators thereby. (4) Obtained the response spectrum of factors on seakeeping performance. (5) Defined and obtained evaluation index, dangerousness, relative and maximum dangerousness of factors on seakeeping performance. (6) Analyzed the calculated dangerousness of evaluation index and picked the vertical acceleration out of 7 factors as the presentative factor on seakeeping performance. (7) Carrid out the judgement of danger by obtaining dangerousness value according to steaming hour, course alteration and speed change. By synthesizing the above items, the authors suggests a computer model of navigational safety evaluation system and examined the validity of the model by computer simulation.

• Steel and Composite Structures
• /
• 제45권1호
• /
• pp.119-131
• /
• 2022

Due to the complexity of the structure and the limits of classical SEA, a combined SEA approach is employed, with angle-dependent SEA in the low- and mid-frequency ranges and advanced SEA (ASEA) considering indirect coupling in the high-frequency range. As an important component of the steel box girder, the dynamic response of an L-junction periodic ribbed plate is calculated first by the combined SEA and validated by the impact hammer test and finite element method (FEM). Results show that the indirect coupling due to the periodicity of stiffened plate is significant at high frequencies and may cause the error to reach 38.4 dB. Hence, the incident bending wave angle cannot be ignored in comparison to classical SEA. The combined SEA is then extended to investigate the vibration properties of the steel box girder. The bending wave transmission study is likewise carried out to gain further physical insight into indirect coupling. By comparison with FEM and classical SEA, this approach yields good accuracy for calculating the dynamic responses of the steel box girder made of periodic ribbed plates in a wide frequency range. Furthermore, the influences of some important parameters are discussed, and suggestions for vibration and noise control are provided.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 추계학술대회 논문집
• /
• pp.108-116
• /
• 2001

In this paper, statistical properties of waves in the sea area of Mara-do, Korea are examined based on 1998-1999's wave data from a directional wave buoy which is located in Mara-do. Wave data aquisition rate, monthly maximium, minimum and mean wave heights, frequency of wave direction are summarized. Wave height and period scatter diagrams and n-year return period wave heights are estimated. Wave periods of maximum wave heights are also estimated.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권4호
• /
• pp.739-749
• /
• 2015

A new conceptual dual-buoy Wave Energy Converter (WEC) for the enhancement of energy extraction efficiency is suggested. Based on actual wave data, the design process for the suggested WEC is conducted in such a way as to ensure that it is suitable in real sea. Actual wave data measured in Korea's East Sea (position: $36.404N^{\circ}$ and $129.274E^{\circ}$) from May 1, 2002 to March 29, 2005 were used as the input wave spectrum for the performance estimation of the dual-buoy WEC. The suggested WEC, a point absorber type, consists of two concentric floating circular cylinders (an inner and a hollow outer buoy). Multiple resonant frequencies in proposed WEC affect the Power Ttake-off (PTO) performance of the WEC. Based on the numerical results, several design strategies are proposed to further enhance the extraction efficiency, including intentional mismatching among the heave natural frequencies of dual buoys, the natural frequency of the internal fluid, and the peak frequency of the input wave spectrum.

• 수산해양교육연구
• /
• 제25권1호
• /
• pp.1-11
• /
• 2013

The aim of this study was estimated the characteristics of the wave propagation by the water level conditions using a numerical modeling method at the Wando sea area. For three cases numerical simulation on the condition of incident and incoming of the deepwater design wave and the season normal wave, the spatial distribution of the incident wave at study area were investigated. And the calculated numerical modeling results were compared with measured field wave data. According to on-site wave data measured for 18 days, the range of the significant wave height and period were 0.10~1.14 m, 4.35~8.74 sec, respectively, and the maximum wave height were 0.15~1.66 m. From the results of numerical model for offshore design wave incident, the wave height attacked from Southern-East direction at this study area were over maximum 10.5 m because of rapidly change of water depth. Numerical modeling by three water level conditions of Approxmate Lowest Low Water Level(Approx. L.L.W), Mean Sea Level(M.S.L) and Approximate Highest High Water Level(Approx. H.H.W) were practiced. From the results for the case of Approx. H.W.L, variations of wave height at the back area of islands were about 1.6 m at maximum value for the case of deepwater design wave incoming. The significant wave heights of winter season were bigger than summer under normal wave condition, the incident wave height over 5.5 m decreased by shielding effect of islands. The change of maximum wave height at summer season were distinct than winter and was about 1.2 m and 0.8 m, respectively.

• Ocean and Polar Research
• /
• 제25권4호
• /
• pp.437-446
• /
• 2003

Field measurements of directional waves were carried out during the summer of 2002 at two coastal sites in water of finite depth. A couple of general purpose instruments were used employing acoustic Doppler technology. The aim of the study was to investigate the spatial behavior of the directional movement of waves as they come ashore. In total,74 tests were carried out during which sea states of low to moderate intensity were recorded. A great number of these runs displayed bimodal characteristics of the spreading function at high frequencies. It was found that in general, the frequency-integrated directional width tends to broaden as the water shoals and when refraction effects are negligible. This is attributed to wave-wave interactions that become pronounced in shallow water. The same directional width showed, also, a tendency to increase with increasing peak frequency of the sea state spectrum. The behavior of the kurtosis of the spreading function was also examined. It was found that for higher frequencies this index tends to increase in wave spectra above a certain sea severity threshold.

• Journal of Hydrospace Technology
• /
• 제2권1호
• /
• pp.18-26
• /
• 1996

It is normal practice to consider bending wave modes only, when one applies SEA (Statistical Energy Analysis) to ship structures because of complexities in SEA modeling and evaluation of coupling loss factors for inplane modes. According to the result of Tratch[1], the inplane wave modes becomes important for the analysis of a foundation structure as the distance from the source and receiver increases. In this paper, the effect of inplane wave modes on structure-borne noise propagation in ship structures is presented. It is shown that the inplane wave could increase the noise level more than 10 dB compared with the results without inplane wave modes at high frequency bands for compartments far from the source location.