• 청정기술
• /
• 제7권3호
• /
• pp.169-178
• /
• 2001

섬유염색은 전 세계적으로 매우 큰 시장이나, 염료를 사용하여 섬유염색을 수행하는 기존 인쇄 공정의 경우 염료의 손실 및 환경오염의 문제점을 갖고 있다. 기존 공정들의 경우 섬유 인쇄 시 전처리 및 후처리 공정이 필요하고 이들 공정에서 폐수가 발생하게 된다. 이런 문제점들의 해결방안으로 전처리 및 후처리 공정이 필요없고 잉크를 효율적으로 사용할 수 있는 잉크제트 프린팅 기법을 섬유염색 기술에 적용하려는 노력이 진행중이다. 섬유인쇄를 위해 잉크제트 프린터를 사용할 경우 안료를 사용하기 때문에 잉크는 액체 상에 고체입자가 분산되어 있는 서스펜션 상태로 존재한다. 분자역학 모사 기법과 유사한 Stokesian 역학 모사 방법을 사용한 전산모사를 통해 외부에서 가해진 압력구배에 의해 노즐 관에 흐르는 분산잉크 중의 입자 분포 및 속도 분포 변화를 살펴보았다. 전산모사결과 입자의 부피분율이 낮을수록, 평균 무차원 서스펜션 속도가 낮을수록, 노즐 관과 입자 크기 사이의 비(H/a)가 클수록 입자들의 분포가 상당히 균일한 것으로 나타났다. 따라서 잉크제트 프린팅 기법을 사용하여 섬유인쇄를 수행하는 경우, 노즐 관에의 유속을 작게 하고 노즐 관과 입자 사이의 크기 비를 크게 해야 균일한 인쇄 성능을 얻을 수 있을 것으로 판단된다.

• 한국정밀공학회지
• /
• 제16권2호통권95호
• /
• pp.145-152
• /
• 1999

This paper presents the principle and experimental results of a non-contact surface roughness measurement by means of screen projected pattern of lase beam reflected from a polished surface. In the reflected laser beam pattern especially from a fine surface like ground or polished one, light intensity varies from the center fo the image to its boundary as the Gaussian distribution. The standard deviation of a light intensity distribution is assumed to be a good non-contact estimator for measuring the surface roughnes, because the light reflectivity is known to be well related with the surface roughness. This method doesn't need to discriminate between the specularly reflected light and the diffusely reflected one, whereas the scattered laser intensity method must do. Nor it needs to adjust the change of light intensity caused by environmental lights or specimen materials. Reflected laser beam pattern narrowly spreads out in the vertical direction to tiny scratches on the polished surface due to abrasives. The deeper the scratch the more the dispersion, which means the rougher surface. The standard deviation of the pattern is nearly in proportion to the surface roughness. Measurement errors by this method are shown to be below 10 percent compared with those obtained by a common contact method. The inclination of measuring unit from the normal axis causes the measurement errors up to 10 percent for an angle of 4 degree. Therefore the proposed method can be used as an on-the-machine quick roughness estimator within 10 percent measurement error.

• 산경연구논집
• /
• 제8권7호
• /
• pp.63-70
• /
• 2017

Purpose - Due to the lack of physical activities and the increase of sedentary behaviors such as screen time, the health condition for contemporaries has been deteriorating. This study is designed to investigate how the use of worktable or tools unfit for body and sedentary behaviors can exercise influence on muscular skeletal disease and how it has an impact on lowering work efficiency and the quality of life with the medium of the muscular skeletal disease. Research design, data, and methodology - The research has developed a questionnaire with 5 hypothesis. The questionnaires were also made by interview and E-mail. 350 copies of questionnaires were distributed and 315 questionnaire were used for the analysis as valid data responses. SPSS ver.22.0 were used and made Cronbach's and reliability test, correlation, Baron & α Kenny 3 step mediated regression analysis. Results - The research has found that living environment factors have positive effect on the occurrence of musculosketal disease. Particularly, repeated use of unfit worktable or tools has a positive effect on the muscular skeletal disorder. And sedentary lifestyle also has a positive effect on the disease. The musculoskeletal disease caused by living environment has a positive impact on lowering the work efficiency. This study has also showed that the muscular skeletal disease has mediated the relationship between the living environment factors and the decrease of work efficiency due to musculoskeletal disease. The musculoskeletal disorders can effect the decrease of the quality of life as well, for the decrease of work efficiency has a positive effect on lowering the quality of life. Conclusions - Sedentary lifestyles, the use of worktable unfit for body, and the repeated use of a tool have caused the increase of muscular-skeletal diseases, and reduction of productivity as well as the hight cost of medical treatment for our contemporaries. Understanding the cause of disease morbidity, finding ways to prevent the disease, and educating people about them would contribute not only to improvement of individual health but also to the advancement of welfare for all.

• 산경연구논집
• /
• 제11권7호
• /
• pp.41-49
• /
• 2020

Purpose: The purpose of this study is to recognize the role and necessity of public data visualization through prior research, investigation, and data verification processes. In addition, this study intends to check what factors should be considered in order to visualize data on the mobile web. Through this process, by identifying the cognitive load affecting information visualization by type, as a result, I would like to propose an effective information visualization method to effectively deliver public data related to government policies. Research design, data and methodology: In this study, we analyzed the case of information visualization according to infographics, which has been widely used in the public field among various visualization methods. For this study, a questionnaire survey was conducted for young people in their 20s and 30s with the highest mobile usage rate. Results: Based on the results, IPA (Importance Performance Analysis) was performed to conduct cognitive load test tools for information visualization of public data and confirmed the implications for each type of infographics. Conclusions: As a result of research, in order to efficiently deliver public data on the mobile web, first, it is necessary to construct a visual screen that can be easily identified through clear data. Appropriate graphic elements can be used according to the type to make it easier for users to acquire and understand information. Second, it is necessary to provide useful content in visualizing information. Third, in order to efficiently transmit information and increase understanding of data, it is necessary to visualize information that can induce interest in data and form metaphors. Fourth, it is necessary to visualize information to reduce cognitive load in terms of physical and mental aspects in order to accommodate users' comfortable information. Fifth, in order to effectively deliver public data, it is necessary to compose contents and information that are easy for users to understand. This study examines effective information visualization methods to increase the communication effect of public data in response to changes in the data-based intelligent information society and suggests implications for each type considering cognitive loads to help future public institutions to communicate and accept information.

• Journal of Radiation Protection and Research
• /
• 제41권3호
• /
• pp.216-221
• /
• 2016

Background: Very fine radiation-induced aerosol particles are produced in intense radiation fields, such as high-intensity accelerator rooms and containment vessels such as those in the Fukushima Daiichi nuclear power plant (FDNPP). Size measurement of the aerosol particles is very important for understanding the behavior of radioactive aerosols released in the FDNPP accident and radiation safety in high-energy accelerators. Materials and Methods: A combined technique using wire screens and imaging plates was developed for size measurement of fine radioactive aerosol particles smaller than 100 nm in diameter. This technique was applied to the radiation field of a proton accelerator room, in which radioactive atoms produced in air during machine operation are incorporated into radiation-induced aerosol particles. The size of $^{11}C$-bearing aerosol particles was analyzed using the wire screen technique in distinction from other positron emitters in combination with a radioactive decay analysis. Results and Discussion: The size distribution for $^{11}C$-bearing aerosol particles was found to be ca. $70{\mu}m$ in geometric mean diameter. The size was similar to that for $^7Be$-bearing particles obtained by a Ge detector measurement, and was slightly larger than the number-based size distribution measured with a scanning mobility particle sizer. Conclusion: The particle size measuring method using wire screens and imaging plates was successfully applied to the fine aerosol particles produced in an intense radiation field of a proton accelerator. This technique is applicable to size measurement of radioactive aerosol particles produced in the intense radiation fields of radiation facilities.

• 한국염색가공학회지
• /
• 제13권6호
• /
• pp.397-404
• /
• 2001

The accurate representation of the colors of dyed fabric on a color CRT(cathode ray tube) screen is the basis for the automatic process in dyeing industry. In the former study, we had focused on the theoretically color matching method between CIE(International Commission on illumination) and RGB color coordinates, but In this study we tried simulating the colors obtained from fabrics on the color CRT by using experimental method. we obtained the following results. 1. We could simulate all of the color CRT by gamut mapping method, even though some of the KOSCOTE(Korea Standard Color of Textile) colors represented on the color CRT didn't exist in the region of color region 2. We could do conditional matching by CIE system, even though it was hard to do invariant matching the Red, Green, Blue phosphors of the color CRT because of the SPD(Spectral Power Distribution) which had been set up before. 3. We could simulate all the colors obtained from fabrics on the color CRT by matching those two color groups from KOSCOTE fabrics and color CRT using match algorithm and matching programs. 4. If we get over on obstacles by grafting CCM and CCK machines which have been used in educational and industrial areas by matching KOSCOTE with color CRT we will be able to invent color simulation system controled automatically.

• 한국염색가공학회지
• /
• 제13권6호
• /
• pp.39-39
• /
• 2001

The accurate representation of the colors of dyed fabric on a color CRT(cathode ray tube) screen is the basis for the automatic process in dyeing industry. In the former study, we had focused on the theoretically color matching method between CIE(International Commission on Illumination) and RGB color coordinates, but In this study we tried simulating the colors obtained from fabrics on the color CRT by using experimental method. we obtained the following results. 1. We could simulate all of the color CRT by gamut mapping method, even though some of the KOSCOTE(Korea Standard Color of Textile) colors represented on the color CRT didn′t exist in the region of color region. 2. We could do conditional matching by CIE system, even though it was hard to do invariant matching the Red, Green, Blue phosphers of the color CRT because of the SPD(Spectral Power Distribution) which had been set up before. 3. We could simulate all the colors obtained from fabrics on the color CRT by matching those two color groups from KOSCOTE fabrics and color CRT using match algorithm and matching programs. 4. If we get over on obstacles by grafting CCM and CCK machines which have been used in educational and industrial areas by matching KOSCOTE with color CRT we will be able to invent color simulation system controled automatically.

• Food Science and Biotechnology
• /
• 제16권5호
• /
• pp.759-764
• /
• 2007

To investigate the effect of soaking and particle sizes on the properties of rice flour and gluten-free rice bread, wet-milled (WRF, dried at $20^{\circ}C$) and dry-milled rice flours (DRF) were passed through sieves (45 or 100 mesh). Soaking of the rice grains affected the particle size distribution of flour passed through the same size screen. The L and b values of WRF were higher than those of DRF and were not changed with decreasing particle sizes, but DRF increased L and decreased b values. The initial pasting temperatures and setback viscosities of both flours decreased with decreasing particle sizes. The swelling powers at $100^{\circ}C$ increased with decreasing particle sizes in DRF, but maintained in WRF. Starch granules were observed on the surface of flour particles in WRF. The apparent viscosity of WRF paste exhibited 3-5 times higher than that of DRF. Thus, wet milled rice flour with smaller particle sizes (${\phi}<150\;{\mu}m$) showed better properties for making gluten-free rice bread.

• Fisheries and Aquatic Sciences
• /
• 제7권3호
• /
• pp.130-135
• /
• 2004

The marine dinoflagellate genus Alexandrium, which produces PSP toxins, has a global distribution. As human-assisted dispersal of the species has been suggested, it is important to develop molecular tools to trace the dispersal pathway. To screen population-specific DNA sequences that differentiate Korean and Japanese A. catenella, we targeted the area downstream of the chloroplast psbA gene using PCR with population-specific DNA primers followed by RFLP (restriction fragment length polymorphism) analysis and sequencing. The RFLP patterns of the PCR products divided Korean and Japanese A. catenella regional isolates into three types: Korean, Japanese, and type CMC3, isolated from Korea. We sequenced the PCR products, but found no similar gene in a homology search. The molecular phylogeny inferred from the sequences separated the Korean and Japanese A. catenella strains, as did the RFLP patterns. However, the Japanese isolates included two slightly different sequences (types J and K), while the Korean sequence was the same as the Japanese K type. In addition, a unique sequence was found in the Korean strains CMC2 and CMC3. Population-specific PCR amplification with Japanese A. catenella type-specific PCR primers designed from the type J sequence yielded PCR products for Japanese strains only, showing that the unknown gene can be used for a population analysis of Korean and Japanese A. catenella.

• 산업경영시스템학회지
• /
• 제35권1호
• /
• pp.101-106
• /
• 2012

Ship handling simulator is a virtual ship navigating system with three dimensional screen system and simulation programs. FTS simulation can produce theoretically infinite experiment tests without time constraint, but which results in collecting determinstic observations. RTS simulation can collect statistical observations but has disadvantage of spending at least 30 minutes for a single experiment. The previous studies suggested that the number of experiment conditions to be tested could be reduced to obtain random data with RTS simulation by focusing on highly difficult experiment condition for ship handling. It has the limitation of not estimating the distribution of ship handling difficulty for the route. In this paper, similarity and clustering analysis are suggested for reduction methodology of experiment conditions. Similarity of experiment conditions are measured as follows: euclidean distance of ship handling difficulty index and correlation matrix of distance differences from the designed route. Clustering analysis and multi-dimensional scaling are applied to classify experiment conditions with measured similarity into reducing the number of RTS simulation conditions. An empirical result on Dangin harbor is shown and discussed.