• 한국해양공학회지
• /
• 제16권4호
• /
• pp.7-12
• /
• 2002

This study is aimed to find the scouring mechanism at the toe of rubble mound structures. To investigate the characteristics of scouring in front of the structure, experiments were performed with regular waves in a 2-D flume. The results of this study are as follows. 1) It can be said the characteristics of incident wave causes rolling and sliding of armour block. The difference of wave pressure on the slope, internal flow as well as settlement of armour block due to the weight cause scouring. 2) It is observed that scouring depth at the toe increased when wave height or period increased. The location of ultimate scouring and deposition depth moved seaward when wave period increased. 3) The failure of rubble mound structure was caused by waves or scouring. Failure by erosion increased with high waves and long waves. 4) Using surf-similarity parameter including characteristics of incident waves and structure, scouring and deposition pattern were found and their limit was formulated.

• 한국수자원학회논문집
• /
• 제53권11호
• /
• pp.951-960
• /
• 2020

본 연구에서는 실내실험을 통하여 기능을 상실한 보 철거로 인하여, 급경사가 형성된 짧은 구간에서 두부침식과 천급점 변화, 그리고 교호사주의 거동을 고려한 하도의 적응과정을 정량적으로 분석하였다. 보 상류에서 두부침식이 발생하여 천급점은 상류로 이동하였다. 실험초기에 빠르게 이동하지만, 시간이 증가하면서 이동속도가 감소하였다. 교호사주가 발달한 조건에서 이동속도는 사주가 발생하지 않은 조건에서보다 빨랐다. 세굴심은 교호사주가 발생하지 않는 조건에서 보다 발생하는 조건에서 더 깊었다. 시간이 증가할수록 최대세굴심은 하류로 이동하며, 최대세굴심의 깊이와 이동속도는 감소하였다. 무차원 최대세굴심은 상류에서 유입되는 유사가 포착되고 되메우기가 진행되면서 이동속도가 감소하였다. 무차원 되메우기 속도가 증가할수록 무차원 최대세굴심은 감소하였다. 초기에 최대세굴심이 깊은 곳에서 되메우기가 빠르게 진행되며, 최대세굴심이 얕은 곳에서는 되메우기가 느리게 진행되었다. 특히, 무차원 되메우기 속도가 5이하에서는 무차원 최대세굴심이 급격하게 감소하며, 그 이후에서는 완만하게 감소하였다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.429-433
• /
• 2004

According to researchers, the influential factors of scouring are generally divided into three factors: the flow conditions, the type and position of structures, and the characteristics of bed materials. In addition, scouring is affected by the 3-dimensional turbulent boundaries, the unsteady flow, the movement of sediment in the scour-hole area, the approach flow velocity and depth, the width of bridge foundation/pier, and the particle size of bed materials. However, it is difficult to estimate the scour depth near bridge piers when all conditions are factored in at once. Therefore, for reasonably accurate estimates of scour depth, it is essential to consider sufficiently the flow force and resisting force for scour. That is, to determine the shear stress concerning the bed material distribution is needed. In this study, the experiments were performed under the condition of a steady state of flow. As a result, scouring occurred at velocity ratios of 0.476,$(V/V_c=0.476)$, and the scour depth was increased linearly as the velocity ratio increased. in addition, the average values of shear stress ratio at zero scouring depth in both rectangular and circular piers were approximately 7$(\tau_c/\tau_{approach})$ and in the case for same size bed particle material. The results of this study can be used for the fundamental material for estimating the scour depth of bed materials.

• 한국염색가공학회지
• /
• 제19권3호
• /
• pp.1-5
• /
• 2007

The advantage of enzyme scouring over alkali scouring is that the enzymatic process can be carried in a neutral pH, resulting in less damage on the fibers and a drastic reduction of wastewater. Since the pH of scouring bath is neutral, dyeing can be carried in the same bath. Four different types of scouring and dyeing in a single-bath were performed in this work: continuous scouring and dyeing in one-bath I and II, simultaneous scouring and dyeing in one-bath I and II. The difference between process I and II is the existence of an after-treatment process in the scouring. Dyeing was performed with three major colors(red, blue, yellow) and black to investigate the dye-ability. The absorbency of scoured and dyed fabrics was measured using gravimetric absorbency testing system. The fabric weight loss was measured after the treatment. Although the color depth for the three major colored fabrics treated in a single-bath was lower than the fabric scoured and dyed separately, the fabrics dyed with black did not show much difference. In addition, the absorbency of fabric treated in a single-bath was higher than the fabric treated separately.

• 한국해양공학회지
• /
• 제31권4호
• /
• pp.281-287
• /
• 2017

In the case of fixed offshore wind turbines, scouring phenomena have been reported around sub-structures as a result of currents, which seriously damage the structural stability. A parametric study of the various sub-structures of a fixed offshore wind turbine was performed to investigate their effects on the scouring phenomena. For a suction bucket foundation and monopile, the effects of the stick-up heights and water depth were studied, respectively. The open source libraries, called OpenFOAM, were used to simulate a violent flow around a foundation. The numerical methods were selected based on a two-dimensional analysis of a suction bucket. Based on the results for various stick-up heights, a larger scouring region was observed with an increase in the stick-up height because of the down-wash flow around a foundation. Based on the results for various monopile water depths, the water depth had an insignificant effect on the scouring.

• 한국수자원학회논문집
• /
• 제32권1호
• /
• pp.49-59
• /
• 1999

우리 나라의 세굴현황을 파악하고 교량설계에 대한 기초자료를 제공하기 위하여 중부지방의 중·소하천에 위치한 교량에 대하여 실시한 세굴조사 자료를 분석하였다. 현장실측은 주로 세굴에 영향을 미치는 물리량들, 즉 수심, 유속, 교각폭, 및 길이, 세굴깊이, 접근각 등을 중심으로 이루어졌다. 지역적으로는 경기도 용인·광주지역, 홍천강의 서면지역, 청평·포천지역, 연천지역, 청주북일지역으로 구분하였으며 교각도 타원과 원형으로 구분하였다. 이들로부터 세굴깊이와 수심, 접근각 도는 Fuoude수 등주요 인자들과의 관계를 도출하였으며 또한 기존의 제안된 세굴공식에 이들을 적용시켜 세굴깊이를 산정하였다. 또한 실측된 세굴깊이와 비교하여 우리 나라에 적용가능한 세굴공식을 제안하였다.

• Journal of Microbiology and Biotechnology
• /
• 제18권3호
• /
• pp.443-448
• /
• 2008

Multidomain proteins for the biochemical analysis of the scouring efficiency of cotton fabrics were constructed by the fusion of a reporter moiety in the N-terminal and the cellulose binding domain (CBD) in the C-terminal. Based on the specific binding of the CBD of Cellulomonas fimi exoglucanase (Cex) to crystalline cellulose (Avicel), the reporter protein is guided to the cellulose fibers that are increasingly exposed as the scouring process proceeds. Among the tested reporter proteins, a thermostable ${\beta}$-glycosidase (BglA) from Thermus caldophilus was found to be most appropriate, showing a higher applicability and stability than GFP, DsRed2, or a tetrameric ${\beta}$-glycosidase (GUS) from Escherichia coli, which were precipitated more seriously during the expression and purification steps. When cotton fabrics with different scouring levels were treated with the BglA-CBD and incubated with X-Gal as the chromogenic substrate, an indigo color became visible within 2 h, and the color depth changed according to the conditions and extent of the scouring.

• Wind and Structures
• /
• 제21권6호
• /
• pp.625-639
• /
• 2015

Monopiles have been most widely used for supporting offshore wind turbines (OWTs) in shallow water areas. However, multi-member lattice-type structures such as jackets and tripods are also considered good alternatives to monopile foundations for relatively deep water areas with depth ranging from 25-50 m owing to their technical and economic feasibility. Moreover, jacket structures have been popular in the oil and gas industry for a long time. However, several unsolved technical issues still persist in the utilization of multi-member lattice-type supporting structures for OWTs; these problems include pile-soil-interaction (PSI) effects, realization of dynamically stable designs to avoid resonances, and quick and safe installation in remote areas. In this study, the effects of PSI on the dynamic properties of bottom-fixed OWTs, including monopile-, tripod- and jacket-supported OWTs, were investigated intensively. The tower and substructure were modeled using conventional beam elements with added mass, and pile foundations were modeled with beam and nonlinear spring elements. The effects of PSI on the dynamic properties of the structure were evaluated using Monte Carlo simulation considering the load amplitude, scouring depth, and the uncertainties in soil properties.

• 한국해양공학회지
• /
• 제11권2호
• /
• pp.1-10
• /
• 1997

The interaction of ground ice features with underlying seabed is one of the major considerations in the design of Arctic pipeline systems. Regarding the development of offshore gas field near Sakhalin Island, which is an ice-infested area, in this paper an ice scour model to determine the burial depth of Arctic offshore pipeline is studied. Using a simplified ice-seabed interaction process, ice scour depth is easily estimated. This nonlinear numerical model can simulate the scouring process for various enviromental parameters such as ice mass, incoming velocity, soil strength. This study also deals with interaction forces during the scouring process in sloping seabed conditions and discusses the ice loads that are transmitted through the seabed soil.

• 물과 미래
• /
• 제6권1호
• /
• pp.19-28
• /
• 1973

Presented is the results of a model study about scouring around a bridge pier. 24 different types of piers were inestigated for the depth and width of scouring. The grain size of sand used in the experiment ranges from 0.149 to 2, 380mm, The time required to reach the stable bed formation was about 30min, with the range of Froud number from 0.58 to 0.69. It has been found that the scouring is most severe at the frontal side of the pier and decreases with decreasing a contact angle (between the center line of the pier and tangent to the frontal face). For design purposes, it is recomanded that the contact angle at the frontal face is 25 degrees for a triangular type and 40 deyrees for a circular type respectively.