• 제목/요약/키워드: scintillation detector

검색결과 136건 처리시간 0.026초

대구지역(大邱地域) 지각(地殼) ${\gamma}$-선(線)의 조사선량율(照射線量率) 측정(測定) (A Measurement of the Exposure Rates by Terrestrial y-rays in Taegu Area)

  • 장시호;정춘균;강희동;이모성;최문규;김위수
    • Journal of Radiation Protection and Research
    • /
    • 제19권2호
    • /
    • pp.121-132
    • /
    • 1994
  • 본 연구는 대구지역의 지각 ${\gamma}$-선에 의한 조사선량율을 측정하고 그에 따른 성분별 공간선량율 및 지역적 분포 등의 환경방사선 특성을 조사하였다. ${\gamma}$-선 스펙트럼의 측정에는 $4^{'}{\phi}{\times}4^{'}$ NaI(T1) 계측기와 휴대용 다중파고분석장치를 이용하여 이 지역내의 28개 지점에서 in-situ spectrometry를 수행하였으며, 측정된 스펙트럼으로부터 조사선량율을 환산하여 지각 ${\gamma}$-선의 총선량율과 일반적으로 자연방사능의 주종이 되는 $^{40}K,\;^{238}U$ 계열 및 $^{232}Th$계열의 성분별 조사 선량율을 구하였다. 조사결과 대구지역의 지각 ${\gamma}$-선에 의한 평균조사선량율은 $9.4{\mu}R/h$였으며 지점별 분포는 $7.6{\sim}11.0{\mu}R/h$ 범위로 다소 차이를 보였다. 측정시에 수반되는 기후나 우주선 등에 따른 일 변화폭을 고려한다면 지점간의 차이는 주로 표토층의 자연방사성핵종인 $^{40}K,\;^{238}U$계열 및 $^{232}Th$ 계열의 핵종에 기인함을 알 수 있었으며, 성분별 선량율은 $^{40}K\;2.9{\sim}4.6{\mu}R/h,\;^{238}U$ 계열 $1.2{\sim}3,\;1{\mu}R/h,\;^{232}Th$ 계열 $2.5{\sim}5.0{\mu}R/h$의 분포를 나타냈다.

  • PDF

REPLACEMENT OF A PHOTOMULTIPLIER TUBE IN A 2-INCH THALLIUM-DOPED SODIUM IODIDE GAMMA SPECTROMETER WITH SILICON PHOTOMULTIPLIERS AND A LIGHT GUIDE

  • KIM, CHANKYU;KIM, HYOUNGTAEK;KIM, JONGYUL;LEE, CHAEHUN;YOO, HYUNJUN;KANG, DONG UK;CHO, MINSIK;KIM, MYUNG SOO;LEE, DAEHEE;KIM, YEWON;LIM, KYUNG TAEK;YANG, SHIYOUNG;CHO, GYUSEONG
    • Nuclear Engineering and Technology
    • /
    • 제47권4호
    • /
    • pp.479-487
    • /
    • 2015
  • The thallium-doped sodium iodide [NaI(Tl)] scintillation detector is preferred as a gamma spectrometer in many fields because of its general advantages. A silicon photomultiplier (SiPM) has recently been developed and its application area has been expanded as an alternative to photomultiplier tubes (PMTs). It has merits such as a low operating voltage, compact size, cheap production cost, and magnetic resonance compatibility. In this study, an array of SiPMs is used to develop an NaI(Tl) gamma spectrometer. To maintain detection efficiency, a commercial NaI(Tl) $2^{\prime}{\times}2^{\prime}$ scintillator is used, and a light guide is used for the transport and collection of generated photons from the scintillator to the SiPMs without loss. The test light guides were fabricated with polymethyl methacrylate and reflective materials. The gamma spectrometer systems were set up and included light guides. Through a series of measurements, the characteristics of the light guides and the proposed gamma spectrometer were evaluated. Simulation of the light collection was accomplished using the DETECT 97 code (A. Levin, E. Hoskinson, and C. Moison, University of Michigan, USA) to analyze the measurement results. The system, which included SiPMs and the light guide, achieved 14.11% full width at half maximum energy resolution at 662 keV.

의료 방사선 검출기로써 스마트폰 카메라의 특성에 관한 연구 (A Study on the Characteristics of Smartphone Camera as a Medical Radiation Detector)

  • 강한규;김호철
    • 전자공학회논문지
    • /
    • 제53권5호
    • /
    • pp.143-151
    • /
    • 2016
  • 본 연구의 목적은 별도의 방사선 외부 검출장치 없이 스마트폰 자체의 CMOS 반도체 소자만을 활용하여 의료용 방사선 발생장치에서 발생하는 방사선을 효율적으로 검출하기 위한 최적의 조건과 알고리즘을 개발하는 것이다. 본 연구를 통하여 스마트폰에 내장된 CMOS 반도체 소자에 X-선의 선량을 증가시켜가면서 CMOS 영상 센서에서 반응하는 픽셀의 개수 및 밝기 등을 측정하였다. 스마트폰의 전면 카메라가 후면 카메라보다 노이즈가 적고 X-선과 같은 방사선에 대한 반응 특성이 우수하였다. 섬광결정을 사용한 간접 검출방식에 보다 CMOS 자체에 X-선을 반응시키는 직접 검출방식이 더 적은 선량까지 정확하게 검출이 가능하였다. 또한 X-선에 대한 선량의존성은 역치값을 넘어가는 픽셀의 개수를 계산한 Pixel number에 비해 개별 반응한 픽셀의 밝기까지 이용한 Pixel intensity가 더욱 선형적으로 나타났다. 컬러모델에 의한 실험에서는 스마트폰의 컬러모델인 YUV 컬러모델의 값 중 픽셀의 밝기값의 정보를 가지고 있는 Y값을 활용하면 방사선 검출에 있어 효율적일 것으로 사료된다. 향후 이와 같은 방사선 검출을 위한 최적의 조건들과 효율적 검출 알고리즘들에 대한 추가적인 연구가 진행된다면 방사선 선량의 관리가 효율적이며 체계적으로 이루어 질 수 있기 때문에 국민보건건강에 일조 할 수 있을 것으로 사료된다.

자연 방사선량 중 우주선 기여 성분 정량 연구 (Study on The Quantification of Cosmic-Ray Component Contributed to Natural Background Radiation Exposure)

  • 전재식;오희필;하정우;오헌진;강인선
    • Journal of Radiation Protection and Research
    • /
    • 제13권2호
    • /
    • pp.9-20
    • /
    • 1988
  • 자연 방사선 피폭선량 중 우주선 전리 성분의 기여를 정량하기 위하여 LiF TLD를 이용하여 약 1년반에 걸쳐 3개월 간격의 주기적 측정을 수행하였다. TLD는 세 가지를 사용하였는데 그것은 칩과 PTFE원판형으로 된 두 가지의 $^{7}LiF$와 중성자 성분의 기여를 가려내기 위한 원판형의 $^{6}LiF$였다. 선량 측정은 뱃지에 넣은 TLD를 충남대학교 대덕 캠퍼스의 한4층 콘크리트 건물내 3층의 한 연구실에 설치한 10-15cm 두께의 납차폐 상자에 넣어서 90일 간격으로 다섯주기 동안 수행하였다. 비교 연구를 위하여 3'${\phi}\;{\times}\;3$'원통형NaI(Tl) 섬광 검출기와 1024채널 MCA를 이용하여 3MeV 이상의 우주선 경성분에 대한 분광분석을 병행하였는데 그 결과 옥내 차폐체를 이용한 TLD측정치는 옥외 우주선 전리 성분의 약 75%를 측정하고 있음이 밝혀졌다. 이와 같은 차폐 손실을 보정한 TLD측정 결과에 의하면 충남대 대덕 캠퍼스 옥외에서 우주선 전리 성분의 기여는 $34.3{\pm}1.1nGy-h^{-1}$로 나타났는데 이것은 이 측정 지점에서 예측할 수 있었던 선량 값과 매우 잘 일치하는 것이다.

  • PDF

감마프로브용 전단증폭기와 주증폭기의 개발과 성능 평가 (Development and Performance Test of Preamplifier and Amplifier for Gamma Probe)

  • 봉정균;김희중;이종두;권수일
    • 대한핵의학회지
    • /
    • 제33권1호
    • /
    • pp.100-109
    • /
    • 1999
  • 목적: 핵의학장비를 구성하는 신호처리단의 전단증 폭기와 주증폭기는 방사선의 에너지 정보를 주는 펄스를 분석하는데 중요한 부분이다. 이러한 신호처리부분들은 대부분 크기가 표준화된 상용의 Nuclear Instrument Module (NIM)을 사용한파. 그러나, NIM은 이동형 감마프로브에 사용하기에는 너무 부피가 커서 부적합한 편이다. 이를 위해 본 연구는 이동형 감마프로브에 적합한 소형화된 전단증폭기와 주증폭기를 자체 제작하여 성능평가를 하였다. 대상 및 방법: 본 연구에서 제작된 전단증폭기는 전하민감형 전단증폭기였으며, 주증폭기는 capacitor resistor-resistor capcitor (CR-RC) 회로를 이용하여 제작되었다. 제작 후 성능평가를 위해 $2"{\times}2"$ NaI(T1) 섬광체가 부착된 EP-047 (Bicron Saint-Gobain/Norton Industrial Ceramics Co., Ohio, U.S.A) 검출기와 $1"{\times}1"$ NaI(T1) 섬광체가 부착된 R1535 (Ha-mamatsu Photonics K.K., Electron Tube Center, Shizuoka-ken, Japan) 검출기를 다중채널분석기인 AccuSpec/A (Canberra Industries Inc., Meriden Conneticut, U.S.A)를 이용 에너지 스펙트럼을 얻었다. NIM은 TC 145 (Oxford Instruments Inc., Oak Ridge, U.S.A)와 TC241 (Oxford Instruments Inc., Oak Ridge, U.S.A)을 이용하였다. 에너지 스펙트럼은 37 kBq ($1{\mu}Ci$) Cs-137과 2.96 MBq ($80{\mu}Ci$) Tc-99m의 방사선원을 이용하여 250초씩 얻었다. 결과: 자체 제작한 진단증폭기와 주증폭기를 EP-047 검출기와 연결하여 얻은 Tc-99m (140 keV)과 Cs-137 (662 keV)의 에너지 분해능은 각각 12.92%, 5.01%이었으며, R1535 검출기를 연결하여 얻은 Tc-99m과 Cs-137의 에너지 분해능은 각각 13.75%, 5.19%이었다. 그리고 NIM을 EP-047 검출기와 연결하여 얻은 Tc-99m과 Cs-137의 에너지 분해능은 14.6%, 718%이었으나, R1535 검출기를 연결하여 얻은 Cs-137 에너지 스펙트럼은 광봉우리 위치가 변화되어 안정되지 못하였고, Tc-99m의 에너지 스펙트럼은 쉽게 얻을 수 없었다. 결론: 본 연구에서 자체 제작한 전단증폭기와 주증폭기는 광증배관의 종류에 관계없이 우수한 성능을 보여주었다. 결론적으로, 본 연구에서 제작한 전단증폭기와 주증폭기는 소형화된 계수용 감마프로브와 영상용 감마프로브에 활용하는데 유용할 것이라고 사료된다.

  • PDF

THE CURRENT STATUS OF BIOMEDICAL ENGINEERING IN THE USA

  • Webster, John G.
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1992년도 춘계학술대회
    • /
    • pp.27-47
    • /
    • 1992
  • Engineers have developed new instruments that aid in diagnosis and therapy Ultrasonic imaging has provided a nondamaging method of imaging internal organs. A complex transducer emits ultrasonic waves at many angles and reconstructs a map of internal anatomy and also velocities of blood in vessels. Fast computed tomography permits reconstruction of the 3-dimensional anatomy and perfusion of the heart at 20-Hz rates. Positron emission tomography uses certain isotopes that produce positrons that react with electrons to simultaneously emit two gamma rays in opposite directions. It locates the region of origin by using a ring of discrete scintillation detectors, each in electronic coincidence with an opposing detector. In magnetic resonance imaging, the patient is placed in a very strong magnetic field. The precessing of the hydrogen atoms is perturbed by an interrogating field to yield two-dimensional images of soft tissue having exceptional clarity. As an alternative to radiology image processing, film archiving, and retrieval, picture archiving and communication systems (PACS) are being implemented. Images from computed radiography, magnetic resonance imaging (MRI), nuclear medicine, and ultrasound are digitized, transmitted, and stored in computers for retrieval at distributed work stations. In electrical impedance tomography, electrodes are placed around the thorax. 50-kHz current is injected between two electrodes and voltages are measured on all other electrodes. A computer processes the data to yield an image of the resistivity of a 2-dimensional slice of the thorax. During fetal monitoring, a corkscrew electrode is screwed into the fetal scalp to measure the fetal electrocardiogram. Correlations with uterine contractions yield information on the status of the fetus during delivery To measure cardiac output by thermodilution, cold saline is injected into the right atrium. A thermistor in the right pulmonary artery yields temperature measurements, from which we can calculate cardiac output. In impedance cardiography, we measure the changes in electrical impedance as the heart ejects blood into the arteries. Motion artifacts are large, so signal averaging is useful during monitoring. An intraarterial blood gas monitoring system permits monitoring in real time. Light is sent down optical fibers inserted into the radial artery, where it is absorbed by dyes, which reemit the light at a different wavelength. The emitted light travels up optical fibers where an external instrument determines O2, CO2, and pH. Therapeutic devices include the electrosurgical unit. A high-frequency electric arc is drawn between the knife and the tissue. The arc cuts and the heat coagulates, thus preventing blood loss. Hyperthermia has demonstrated antitumor effects in patients in whom all conventional modes of therapy have failed. Methods of raising tumor temperature include focused ultrasound, radio-frequency power through needles, or microwaves. When the heart stops pumping, we use the defibrillator to restore normal pumping. A brief, high-current pulse through the heart synchronizes all cardiac fibers to restore normal rhythm. When the cardiac rhythm is too slow, we implant the cardiac pacemaker. An electrode within the heart stimulates the cardiac muscle to contract at the normal rate. When the cardiac valves are narrowed or leak, we implant an artificial valve. Silicone rubber and Teflon are used for biocompatibility. Artificial hearts powered by pneumatic hoses have been implanted in humans. However, the quality of life gradually degrades, and death ensues. When kidney stones develop, lithotripsy is used. A spark creates a pressure wave, which is focused on the stone and fragments it. The pieces pass out normally. When kidneys fail, the blood is cleansed during hemodialysis. Urea passes through a porous membrane to a dialysate bath to lower its concentration in the blood. The blind are able to read by scanning the Optacon with their fingertips. A camera scans letters and converts them to an array of vibrating pins. The deaf are able to hear using a cochlear implant. A microphone detects sound and divides it into frequency bands. 22 electrodes within the cochlea stimulate the acoustic the acoustic nerve to provide sound patterns. For those who have lost muscle function in the limbs, researchers are implanting electrodes to stimulate the muscle. Sensors in the legs and arms feed back signals to a computer that coordinates the stimulators to provide limb motion. For those with high spinal cord injury, a puff and sip switch can control a computer and permit the disabled person operate the computer and communicate with the outside world.

  • PDF