• Solar Energy
• /
• v.11 no.3
• /
• pp.3-8
• /
• 1991

There are fifteen solar radiation measurement stations over the entire country in Korea. However, they are not capable of supplying reliable solar radiation data for remote areas including islands. The un-manned automated insolation measurement station is suitable for these areas due to the electric power shortage and the maintenance problems at these isolated areas. Our main aim in this work is to develop a solar radiation measurement system which collects and stores data by itself utilizing a PV module and a battery as power source for entire system irregardless of the environmental condition. A developed KIER's prototype system along with an independent HWS reference system has been installed at the designated remote island, Dok-do. Global solar radiation has been measured every hour for a 6-month period of time by both systems at this site. A comparison between the measured solar radiation data by each system indicates that there is an excellent agreement showing average 3.0% of an absolute error. It has been observed that the 8-month average global solar radiation was $2,330W/m^2$ day at this island. We came to the conservative conclusion that the developed KIER system is applicable for measuring solar radiation and for supplying reliable fundamental design data for solar energy utilization system at the remote areas.

• International Journal of Automotive Technology
• /
• v.1 no.1
• /
• pp.35-41
• /
• 2000

The crashworthiness of vehicles with finite element methods depends on the geometry modeling and the material properties. The vehicle body structures are generally composed of various members such as frames, stamped panels and deep-drawn parts from sheet metals. In order to ensure the impact characteristics of auto-body structures, the dynamic behavior of sheet metals must be examined to provide the appropriate constitutive relation. In this paper, high strain-rate tensile tests have been carried out with a tension type split Hopkinson bar apparatus specially designed for sheet metals. Experimental results from both static and dynamic tests with the tension split Hopkinson bar apparatus are interpolated to construct the Johnson-Cook and a modified Johnson-Cook equation as the constitutive relation, that should be applied to simulation of the dynamic behavior of auto-body structures. Simulation of auto-body structures has been carried out with an elasto-plastic finite element method with explicit time integration. The stress integration scheme with the plastic predictor-elastic corrector method is adopted in order to accurately keep track of the stress-strain relation for the rate-dependent model accurately. The crashworthiness of the structure with quasi-static constitutive relation is compared to the one with the rate-dependent constitutive model. Numerical simulation has been carried out for frontal frames and a hood of an automobile. Deformed shapes and the Impact energy absorption of the structure are investigated with the variation of the strain rate.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.6
• /
• pp.1388-1391
• /
• 2005

Temporal changes of cell growth pattern and intracellular content of $\beta$-D-glucans were investigated with off-gas data in Agaricus blazei culture where glucose was intermittently fed. It was observed that the time point of carbon source depletion coincided with the point of sudden drop in the carbon dioxide evolution rate (CER), and that the sole supplementation of glucose was not enough to maintain active cell growth and glucan content. On the other hand, when yeast extract, a typical nitrogen source, was supplemented together with glucose when the CER suddenly dropped because of carbon source depletion, an active cell growth could be maintained until the end of the culture and the glucan content did not decrease with culture time, significantly enhancing glucan productivity.

• Applied Microscopy
• /
• v.28 no.1
• /
• pp.121-126
• /
• 1998

Detailed studies of high resolution TEM inages on the modulated structure caused by Zn vacancy ordering along [110] direction in BZT sintered at $1400^{\circ}C$ for 90 hours had revealed that the images which had hexagonal patterns were similar to those obtained from the structure which had no modulation, These images had appeared over the wide ranges from -30 nm to -42 nm in defocus values and from 2 nm to 20 nm in thickness. The computer simulated images showed that the modulation due to Zn vacancy ordering had made a small change in contrast in the interior of hexagonal pattern, which was very difficult to differenciate in experiments. The image which demonstrated the modulated structure very well was the one which obtained at -52 nm in defocus value and 16 nm in thickness.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.1
• /
• pp.171-176
• /
• 2007

An important challenging issue in the automotive industry is the light-weight, safe design and enhancement of crash response of an auto-body structures. These objectives lead to increasing adoption of high strength steel sheet for inner and outer auto-body members. This paper evaluates the dynamic tensile characteristics of high strength steel sheets, HS45R, TRIP60, DP60 and DP100, along the rolling direction and transverse direction. Static tensile tests were carried out at the strain rate of 0.003/sec using the static tensile machine (Instron 5583). Dynamic tensile tests were carried out at the range of strain rate from 0.1/sec to 200/sec using a high speed material testing machine developed. The tensile tests acquire stress-strain relation and strain rate sensitivity of each material. The experimental results show two important aspects for high strength steels: the flow stress increases as strain rate increases; the strain hardening decreases as the tensile stress increases. The experiments also produce interesting results that the elongation does not decrease even when the strain rate increases.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.1
• /
• pp.56-61
• /
• 1997

Lead zirconate titanate (PZT) thin fills were deposited onto the Pt/Ti/SiO2/Si substrate by the pulsed laser deposition with the second harmonic wavelength (532 nm) of Nd:YAG laser. In order to determine the optimum conditions for the film deposition, the phase of the films were investigated as functions of ambient oxygen pressure, substrate temperature, and laser fluence. Also the chemical composition analysis was conducted for the PZT films deposited under various ambient oxygen pressure. When the distance between substrate and bulk PZT target is set to 20 mm, the optimum conditions have been determined to be 3 torr of oxygen pressure, 1.5 J/cm2 of laser fluence, and 823-848(±10) K range of substrate temperature. At these conditions, perovskite phase PZT films were obtained on platinized silicon. The chemical composition of the films is very similar to that of PZT bulk target. The physical structure of the deposited films analyzed by scanning electron microscopy shows a columnar morphology perpendicular to the substrate surface. Capacitance-Voltage hysteresis loop measurements show also a typical characteristics of ferroelectric thin film. The dielectric constant is found to be 528 for the 0.48 μm thickness of PZT thin film.

• Journal of Korean Ophthalmic Optics Society
• /
• v.14 no.1
• /
• pp.103-108
• /
• 2009

Purpose: The objective of this study is to compare and analyze the wearing status of refractive error correction devices of elders who reside in a city or in a small town district. Methods: Each of opticians from a small town or a city was selected for the study of wearing status of presbyopia correction device for each residential district in units of percentage. with the analysis of the age and gender distributions of the elders, numbers of elderly members, and the kinds of presbyopia correction. Results: The wearing rate of progressive lens was reduced in reverse proportion to the increase of the age for the people of presbyopia in a twon. Pepople in 60s living in a town perferred to wearing bifocal lens, but people of 50~60s preferred to single vision lenses. However, none of people living in a city who is diagnosed as presbyopia had refractive error correction device, and no one used bifical lenses. The progressive lens was mostly used in the people of 40~50s and using rate of those lenses reduced with the age; and single vision lens had the highest rate of in the 40~50s but no one wore it in the 70s. Conclusions: Among the refractive error correction devices, the progressive lens was most widely worn by presbyopia group who is living in a town or a city. In particular, the refractive error correction devices were most preferred in 40~50s of early presbyopia. The highest preference for the progressive lens in the people with the early presbyopia indicates that the wearing rate of the progressive will be increased in future. Therefore, the opportunity of systematic education on the progressive lens should be increased.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2003.11a
• /
• pp.345-357
• /
• 2003

The paper discusses a novel educational initiative in e-commerce pedagogy where students work on an e-government project. The paper describes a two-semester joint e-government project conducted by the town of Amherst, NY, and the State University of New York at Buffalo. During the first semester, students in a graduate e-commerce course in the School of Management were instructed to identify and analyze management issues valuable for small or middle size local government. In the second semster graduate students from the Department of Computer Science and Engineering designed and implemented prototypes of three e-government portals: an on-line action site for governmental procurement (E-Procurement), a portal for reservation of community recreation facilities (E-Recreation), and a portal for online dog registration (E-DogRegistration) combining a central registry of dog owners with distributed veterinarian databases. The objective of this initiative is twofold. First, it saves the local government resources by eliminating duplication of services and by using students as developers. Second, it provides students with real life hands-on experience. The paper discusses both the technical issues involved in the implementation of the project, and the management issues that need to be taken into account to enhance the e-commerce experience for the ordinary citizen and local governments.

• 한국약용작물학회:학술대회논문집
• /
• 2012.05a
• /
• pp.269-270
• /
• 2012

• 한국약용작물학회:학술대회논문집
• /
• 2012.05a
• /
• pp.271-272
• /
• 2012