• Korea-Australia Rheology Journal
• /
• 제15권1호
• /
• pp.43-50
• /
• 2003

In this study, two types of biodegradable resins-based clay nanocomposites, in which organic montmorillonite clay was filled, were prepared by the direct melt blending method. In order to characterize the nanocomposite structure, wide-angle X-ray diffraction (WAXD) and TEM observation were performed. Characterization of the nanocomposites shows that intercalated and partially exfoliated structures were generated by the melt blending method. Mechanical and rheological properties of the nanocomposites were measured respectively. For the mechanical properties, there were improvements in tensile strength and Young's modulus of the nanocomposites due to the reinforcement of nanoparticles. The rheological behaviors of the nanocomposites were significantly affected by the degree of the dispersion of the organoclay. The storage modulus of the nanocomposites was measured and the degree of the dispersion of the organoclay was evaluated from the value of the terminal slope of the storage modulus. In addition, the quantity of the shear necessary for making the nanocomposite for melt intercalation method was estimated from the relationship between the value of the terminal slope of the storage modulus and the applied shear.

• 동아시아식생활학회지
• /
• 제18권4호
• /
• pp.624-632
• /
• 2008

This study was conducted to estimate the drift of change for in Kimchi purchases, and to contribute to the efforts to improve the quality improvement of Kimchi sold at markets. Questionnaires were distributed to 450 adults, and 396 samples were statistically analyzed. There were significant differences in the average values of importance and satisfaction. Based on analyses of the 14 factors, the level of satisfaction was significantly lower than the level of importance. Importance-factors such as 'taste' ($4.56{\pm}0.81$) and consistency of 'quality' ($4.37{\pm}0.79$) are very important to consumers, whereas 'package volume' ($3.79{\pm}0.91$) and 'price cutting' ($3.84{\pm}1.01$) are rarely considered by consumers. Fourteen significance factors were three factors. Overall significance for selection attributes when purchasing Kimchi differed according to gender, age and marital status. Fourteen satisfaction factors were extracted to four factors. Overall satisfaction for selection attributes when purchasing Kimchi differed according to martrial status. Total satisfaction with selection attributes when purchasing the food was greatly affected by its quality and packaging. These findings confirmed that Kimchi products should be diversified and active marketing should be carried out if Kimchi is to become a global product.

• 폴리머
• /
• 제39권2호
• /
• pp.200-209
• /
• 2015

In this study, the influence of dilauroyl peroxide on mechanical and thermal properties of different polypropylene (PP) matrices was investigated. Polypropylene matrices, different molecular weight isotactic PP containing 0.01, 0.02, 0.04, 0.06, 0.08, and 0.1 wt% of dilauroyl peroxide (DLP) were prepared by using a single-screw extruder. The effect of the visbreaking agent (DLP) on mechanical, physical, thermal and morphological properties of different molecular weight PP had been studied. Mechanical properties (tensile strength at break point, at yield and elongation at break point), melt flow index (MFI), scanning electron microscope (SEM) and differential scanning calorimetric (DSC) analyses of these matrices were examined. Melting ($T_m$) and crystallization ($T_c$) temperatures, crystallinity ratio (%) and enthalpies were determined. The microstructure of isotactic polypropylene matrix was investigated by scanning electron microscopy (SEM). From SEM analysis, it was observed that the surface disorder increased by the increasing amount of DLP. As a result of DSC analyses, the crystallinity ratio of the PP matrices has varied between 1.64-7.27%. Mechanical properties of the matrices have been improved. Particularly, the mechanical tests of PP have given interesting results when compounded with 0.06-0.08 wt% dilauroyl peroxide (DLP). Mechanical properties and thermal decomposition processes were all changed by increasing the amount of DLP in the matrix structure.

• 한국식생활문화학회지
• /
• 제24권6호
• /
• pp.711-720
• /
• 2009

The purpose of this study was to understand the effects of hotel employees' physical attractiveness on person-job fit and to empirically analyze whether self-esteem and self-efficacy play a mediating role in the causality between an employee's physical attractiveness and person-job fit. Self-administered questionnaires were completed by 345 employees and the data were analyzed by frequency analysis, factor analysis, reliability analysis, correlation analysis and multiple regression analysis. The primary results were as follows: Multiple regression analysis showed that hotel employee physical attractiveness had a positive significant influence on self-esteem ($\beta=.504$, p<.001) and self-efficacy ($\beta=.441$, p<.001). Also, employee selfesteem ($\beta=.281$, p<.001) and self-efficacy ($\beta=.478$, p<.001) each had a positive significant influence on person-job fit. As a result of analyzing the mediating role, the effect of hotel employees' physical attractiveness on person-job fit was partially mediated by self-esteem and self-efficacy.

• Journal of Applied Biological Chemistry
• /
• 제60권1호
• /
• pp.35-39
• /
• 2017

Turkey has a very rich fungal flora due to its phytogeographical position. The screening of chemical content and active substances of mushrooms becomes an important subject not only for Turkey but also for all over the world. In the last decade, Analyses on phytochemical and biological activity of fungi have gradually increased as a result of improvement in the number and quality of facilities. In the scope of the present research, four medicinal mushrooms; Morchella elata, Lactarius volemus, Cantharellus cibarius and Tricholoma terreum were analyzed for their fatty acid compositions and antioxidant capacities. The fungal species have been found with unsaturated fatty acid/saturated fatty acid ratio of 6.73 for Morchella elata, 4.12 for Lactarius volemus, 5.21 for Cantharellus cibarius, 3.73 for Tricholama terrum. In addition, the concentration of malondialdehyde which was an indicator of lipid peroxidation was also determined in these species. According to the results, free radical scavenging activity of Morchella elata and Lactarius volemus were found higher than the other species. Any of the mushroom species investigated were found having very high metal chelating activity. The results showed that the extract of Morchella elata and Lactarius volemus exhibited significant antioxidant activities. Hence, the mushrooms have a potential to be a natural antioxidant in food industries as antioxidant agent.

• Nuclear Engineering and Technology
• /
• 제52권8호
• /
• pp.1764-1770
• /
• 2020

The present work was mainly concerned with studying the operation of RC-phase shift oscillator based on MOSFET type 2N6660 under the influence of different temperature levels ranging from room temperature (25 ℃) up-to135 ℃ and gamma-irradiation up-to 3.5 kGy. In this concern, both the static (I-V) characteristic curves of MOSFET devices and the output signal of the proposed oscillator were recorded under ascending levels of both temperature and gamma-irradiation. From which, it is clearly shown that the drain current was decreased from 0.22 A, measured at 25 ℃, down to 0.163 A, at 135 ℃. On the other hand, its value was increased up-to 0.49 A, whenever the device was exposed to gamma-rays dose of 3.5 kGy. Considering RC-phase shift oscillator, the oscillation frequency and output pk-pk voltage were decreased whenever MOSFET device exposed to gamma radiation by ratio 54.9 and 91%, respectively. While, whenever MOSFET device exposed to temperature the previously mentioned parameters were shown to be decreased by ratio 2.07 and 46.2%.

• Advances in environmental research
• /
• 제9권3호
• /
• pp.215-232
• /
• 2020

Crude oils are essential source of energy. It is majorly found in geographical locations beneath the earth's surface and crude oil is the main factor for the economic developments in the world. Natural crude oil contains unrefined petroleum composed of hydrocarbons of various molecular weights and it contains other organic materials like aromatic compounds, sulphur compounds, and many other organic compounds. These hydrocarbons are rapidly getting degraded by biosurfactant producing microorganisms. The present study deals with the isolation, purification, and characterization of biosurfactant producing microorganism from oil-contaminated soil. The ability of the microorganism producing biosurfactant was investigated by well diffusion method, drop collapse test, emulsification test, oil displacement activity, and blue agar plate method. The isolate obtained from the oil contaminated soil was identified as Bacillus subtilis. The identification was done by microscopic examinations and further characterization was done by Biochemical tests and 16SrRNA gene sequencing. Purification of the biosurfactant was performed by simple liquid-liquid extraction, and characterization of extracted biosurfactants was done using Fourier transform infrared spectroscopy (FTIR). The degradation of crude oil upon treatment with the partially purified biosurfactant was analyzed by FTIR spectroscopy and Gas-chromatography mass spectroscopy (GC-MS).

• Nuclear Engineering and Technology
• /
• 제48권5호
• /
• pp.1219-1229
• /
• 2016

The present paper reports on a trial to shed further light on the characterization, applications, and operation of radar speed guns or Gunn diodes on different radiation environments of neutron or g fields. To this end, theoretical and experimental investigations of microwave oscillating system for outer-space applications were carried out. Radiation effects on the transient parameters and electrical properties of the proposed devices have been studied in detail with the application of computer programming. Also, the oscillation parameters, power characteristics, and bias current were plotted under the influence of different ${\gamma}$ and neutron irradiation levels. Finally, shelf or oven annealing processes were shown to be satisfactory techniques to recover the initial characteristics of the irradiated devices.

• 전자공학회논문지
• /
• 제50권6호
• /
• pp.238-245
• /
• 2013

제스처 인식은 자연스러운 사용자 인터페이스를 위해 활발히 연구되는 중요한 분야이다. 본 논문에서는 키넥트 카메라로부터 입력되는 사용자의 3차원 관절(joint) 정보를 해석하여 제스처를 인식하는 방법이 제안된다. 대상으로 하는 제스처의 분포 특성에 따라 분류 트리를 설계하고 입력 패턴을 분류한다. 그리고 제스처를 리샘플링 및 정규화 하여 일정한 구간으로 나누고 각 구간의 체인코드 히스토그램을 추출한다. 트리의 각 노드별로 분류된 제스처에 다중 클래스 SVM(Multiclass Support Vector Machine)를 적용하여 학습한다. 이후 입력 데이터를 구성된 트리로 분류한 다음, 학습된 다중 클래스 SVM을 적용하여 제스처를 분류한다.

• 보존과학회지
• /
• 제38권4호
• /
• pp.314-326
• /
• 2022

Investigation of conservation status, optical survey, infrared thermography, and ultrasonic examination were performed on Avalokitesvara Bodhisattva mural and Buddhist Monk Bodhidharma mural to determine the conservation status and physical properties. As a result of investigation of conservation status, the types of damage are largely divided into the wall and finishing layer damage, painting layer degradation, damage due to restoration materials, stains and contamination, and biological damage. As a result of the optical survey, drawing, stains, and repainted site were confirmed. Result of the infrared thermography, the delamination of the finishing layer was confirmed, and some locations and shapes of the wooden lath inside the wall were identified. The result of the 3D scanning, the deviation, and the separation of the wall was confirmed. As a result of ultrasonic examination, it was confirmed that the physical properties of the mural were identified and the ultrasonic speed was relatively low due to physical damage such as delamination and exfoliation of the finishing layer and cracking. Ultrasonic speed values were also high in some wall cracks or delamination, and it was confirmed by the infrared thermography results that the wooden lath inside the wall was located in those parts. It was possible to understand that the wooden lath inside the walls affects the ultrasonic speed during the ultrasonic examination. Therefore, management through periodic inspection of the relevant elements is necessary, and a countermeasure for damage that may occur in the future should be prepared along with intensive monitoring of the major damage identified in this diagnosis result.