• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.48 no.3
• /
• pp.225-234
• /
• 2022

The purpose of this study was to confirm the skin whitening and UV absorption effects of bioconverted Beta vulagaris (BBE) using Lactiplantibacillus plantarum SM4, and the effects were evaluated by measuring total polyphenol content (TPC), total flavonoid content (TFC), radical elimination activity (RSA), and tyrosinase activity inhibition (TAI). TPC and TFC of BBE were 25.0 mg GAE/g DM and 8.05 mg QE/g DM, which were 1.3 and 1.1 times higher than hot-water extract (HWE) respectively. RSA, an indicator of antioxidant activity, and TAI, an indicator of skin-whitening effect, were 36.8%, and 68.6%, respectively, 1.1 and 1.2 times higher than that of HWE. UVA and UVB absorption of BBE were 21.4 and 87.6%, which was 1.4 and 1.7 times higher than that of HWE respectively. When main substances of BBE were analyzed using LC-MS/MS, kaempferol and isorhamnetin, a type of polyphenols known to have high antioxidant and skin-whitening effects, were identified. As a results, BBE is expected to be used as a functional cosmetic material as it has excellent antioxidant, skin whitening, and UV absorption properties.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.3
• /
• pp.209-216
• /
• 1998

The paper presented here is aimed at increasing knowledge on purine metabolism in ruminants and hence the quantification of microbial cells entering the small intestine from urinaη excretion of purine derivatives. Nucleic acid metabolisms of micro-organisms in the rumen, digestion and absorption of nucleic acids entering the intestines, metabolisms of absorbed and endogenous purines involving de novo synthesis of nucleic acids in the ruminants host, and the relationship between absorbed and excreted purines are reviewed. Principal concerns about an amount of purine derivatives excreted in urine in relation to a change in purine-N: total-N ratios in rumen microbes that leave the rumen are discussed. The use of urinary excretion of purine derivatives as an indicator of the amount of microbial biomass leaving the rumen has to be done with some caution since it may be impossible to get a representative sample of microbes entering the intestine and thus yield estimates are relative rather than absolute.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.4
• /
• pp.458-471
• /
• 2020

Effect of pre-treatment and compression ratio on specific gravity (SG) and dimensional stability improvement of three lesser-used wood species from natural forest area of North Kalimantan Province, Indonesia had been investigated. Hot soaking at 80℃ for 3 hours within 2 and 5% of boron solution was applied as pre-treatment, while compression ratio applied was 20 and 40% from the initial thickness. Densification was conducted using hot pressing machine at 30 kg/㎠ of pressure and 160℃ of temperature for 15 minutes. Specific gravity was measured gravimetrically, while dimensional stability was evaluated through thickness swelling and water absorption as the indicator. Results show that SG of densified wood was influenced by wood species and compression ratio, but not by pre-treatment applied; while dimensional stability was influenced by wood species, compression ratio, and pre-treatment. Specific gravity and water absorption of densified wood was improved significantly. Specific gravity increased 28.86-63.03%, while water absorption decreased 12.80-15.89%. Thickness swelling of 20% densified wood was lower than that of 40% densified wood.

• Journal of the Korean Society for information Management
• /
• v.23 no.3 s.61
• /
• pp.223-239
• /
• 2006

As the fact that science is the driving force behind technological development and that technological innovation contributes to economic development has been proved empirically convincing, the interaction between science and technology is highly emphasized in advanced countries. But, Korea has not been active in conducting research on science-based technological development and on the scientific fields that have strong relationships with Korean technology. This study attempts to explore the influence of scientific research papers cited in US patents by Koreans on other US patents and identify the interactions between scientific research papers and patents, by examining the scientific references cited in the Korean-originated US patents.

• Journal of radiological science and technology
• /
• v.45 no.6
• /
• pp.523-529
• /
• 2022

Gamma spectroscopy analysis is widely used for radioactivity analysis, and various factors are required for radioactivity calculations. Among the factors, K3 for each sample significantly influences the results. The previous methods of correcting the self-absorption effect include a computational simulation method and a method that requires making a CRM(certified reference material) identical to the sample medium. However, the above methods have limitations when used in small institutions because they require specialized program utilization skills or high manufacturing costs and large facilities. The aim of this study is to develop a method that can be easily and rapidly applied to radioactivity analysis. After filling the beaker with water, we placed the radiation source in a uniform position and used the measured value as the benchmark. Next, a correction factor was derived based on the difference in the radiation source count of the benchmark and the identically measured sample. For the radiation source, Eu-152, which emits a broad range of energy within the measurement range of gamma rays, and Cs-134 and Cs-137, which are indicator nuclides in environmental radiation analysis, were used. The sample was selected within the density range of 0.26-2.11 g/cm³, and the correction factor was derived by calculating the count difference of each sample compared to the reference value of water. This study presents a faster and more convenient method than the existing research methods for determining the self-absorption effect correction, which has become increasingly necessary.

• Korean Journal of Food Science and Technology
• /
• v.48 no.5
• /
• pp.492-495
• /
• 2016

This study aimed at investigating the influence of different rice varieties (Palbangmi, Saegoami, Mimyeon, Dasan-1, Hanarm, Boramchan, and Baegjinju) on the preparation process of rice cookies. Rice grains were pulverized by dry milling and subsequently screened using a 100-mesh sieve. Dasan-1, Hanarm, and Palbangmi flours showed low water absorption index (WAI) compared to other rice flours. The spread ratios of the cookies prepared with Dasan-1, Hanarm, and Palbangmi flours reached higher values than those obtained with other rice varieties. As a result, the hardness of the cookies prepared with Dasan-1, Hanarm, and Palbangmi flours was relatively low. On the contrary, cookies prepared with Saegoami, Boramchan, and Baegjinju flours showed inadequate qualities because they contained relatively high levels of damaged starch, which increased water absorption in the cookie dough. The WAI value of rice flour could be the most important indicator to determine the quality of rice cookies.

• Transactions of the Korean hydrogen and new energy society
• /
• v.28 no.6
• /
• pp.669-674
• /
• 2017

In this study, the novel electrochemical and colorimetric analysis methods are suggested to estimate the degree of phosphoric acid ion poisoning on Pt based catalyst surface and to confirm the possibility of replacing the expensive and long time consumed conventional methods. As the ways, the electrochemical half cell tests such as cyclic voltammetry (CV) and linear sweep voltammetry (LSV) are used and the change in chemical behavior by absorption of the phosphoric acid ion on Pt based catalyst surface and hydrogen peroxide decomposition reaction are successfully recognized by colorimetric measurements. Conclusively, it is proved that the new methods show superior sensitivity for identifying the degree of phosphoric acid poisoned on Pt based catalyst.

• Journal of Sensor Science and Technology
• /
• v.23 no.4
• /
• pp.272-277
• /
• 2014

At present, the index of chemical oxygen demand (COD) is widely used as an indicator of organic water pollution with biochemical oxygen demand (BOD). But, traditional COD measurement method are not only with various chemical reagents exhausted, but also long time consumed, the operation procedure and the modification are much professional. This paper reported a novel COD measurement system using double-beam and multiple wavelength analysis UV-VIS spectrometries. It consists of pulsed xenon lamp, two-way optical fiber, optical switch, spectrometer and main processor. Proposed COD measurement system obtains any spectral information of water sample (KHP standard sample and two river water and wastewater) and reference sample (distilled water) in the range of 200~520 nm, corresponding to the COD concentration from 0 to 300 mg/L through calculating the UV absorbance. The system show improved precision and can work continuously fast at time interval about 25 seconds.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.1
• /
• pp.63-71
• /
• 2006

An automated carbonyl measurement system was constructed. Atmospheric carbonyl compounds were extracted onto DNPH containing collection solution while flowing through a glass coil. Each carbonyl species was separated on a HPLC column and quantified by UV absorption detector. Using this system, carbonyl compounds were continuously measured at the campus of Korea University in Seoul, Korea during June, 2005. Sampling resolution was 30 minutes and the detection limit of HCHO was 0.19 ppbv. Also, $\O_{3}$, it's precursors, and meteorological parameters were measured. The maximum, minimum, average, and median concentrations of HCHO during the whole experiment was 35.8 ppbv, 1.4 ppbv, 11.7 ppbv, and 9.3 ppbv respectively. Formaldehyde showed a distinct diurnal variation with a broad maximum around 13 $\sim$ 15, which was 1 $\sim$ 3 hours ahead of an ozone maximum. During a couple of days, however, HCHO concentrations were kept high through the night or increased concomitantly with NOx in the morning. These results imply that HCHO was mainly produced from the photochemical oxidation of VOCs, but local emission sources couldn't be ruled out. The differences between daily maximum and minimum of $O_{3}$ and HCHO were calculated for 11 days of June, when typical diurnal variations were observed for the two species. A strong positive correlation was found between $\Delta O_{3}$ and $\Delta HCHO$ and the average mole ratio of $\Delta HCHO$ to $\Delta O_{3}$ was 2.6. It indicates that formaldehyde played a key role in $\Delta O_{3}$ production as an indicator species in Metropolitan Seoul during June, 2005.

• Economic and Environmental Geology
• /
• v.50 no.6
• /
• pp.537-544
• /
• 2017

Stable carbon isotope ratio of carbon dioxide (${\delta}^{13}C_{CO2}$) is used as an important indicator in the researches for global climate change and carbon capture and sequestration technology. The ${\delta}^{13}C$ value has been usually analyzed with Isotope Ratio Mass Spectrometer (IRMS). Recently, the use of Laser Absorption Spectrometry (LAS) is increasing because of the cost efficiency and field applicability. The purpose of this study was to suggest practical procedures to prepare laboratory reference gases for ${\delta}^{13}C_{CO2}$ analysis using LAS. $CO_2$ gas was adjusted to have the concentrations within the analytical range. Then, the concentration of $CO_2$ was assessed in a lab approved by the Korea Laboratory Accreditation Scheme and the ${\delta}^{13}C_{CO2}$ value was measured by IRMS. When the instrument ran over 12 hours, the ${\delta}^{13}C$ values were drifted up to ${\pm}10$‰ if the concentration of $CO_2$ was shifted up to 1.0% of relative standard deviation. Therefore, periodical investigation of analytical suitability and correction should be conducted. Because ${\delta}^{13}C_{CO2}$ showed the dependency on $CO_2$ concentration, we suggested the equation for calibrating the concentration effect. After calibration, ${\delta}^{13}C_{CO2}$ was well matched with the result of IRMS within ${\pm}0.52$‰.