• Applied Microscopy
• /
• v.42 no.1
• /
• pp.9-16
• /
• 2012

The goal of this study was to identify neurotransmitters in endings (p-endings) presynaptic to low-threshold mechanoreceptive vibrissa afferents in the laminae III/IV of cat trigeminal caudal nucleus (Vc). Rapidly-adapting vibrissa afferents were intra-axonally labeled after electrophysiological identification, and postembedding immunogold staining with antisera against ${\gamma}$-aminobutyric acid (GABA) and glycine was performed, followed by quantitative ultrastructural analysis of p-endings presynaptic to the labeled vibrissa afferent terminals. Sixteen p-endings, which are presynaptic to the HRP-labeled vibrissa afferent terminals, were analyzed in this study: Eight p-endings (50%, 8/16) were immunopositive to GABA but immunonegative to glycine (GABA+ p-ending), and remaining 8 p-endings (50%, 8/16) exhibited immunoreactivity to both GABA and glycine. Bouton volume of the p-endings was not significantly different between the two groups. However, the p-endings differed from each other in relative content of GABA and glycine. These findings suggest that low-threshold mechanoreceptive information conveyed through vibrissa afferent at Vc is presynaptically modulated by GABA and/or glycine, and that degree of presynaptic modulation may differ among each vibrissa afferent terminal.

• Journal of dental hygiene science
• /
• v.13 no.3
• /
• pp.321-329
• /
• 2013

Although it has been reported that lysyl oxidase (LOX) is involved in odontoblastic differentiation, the role of LOX on odontoblastic differentiation by hydrogen peroxide ($H_2O_2$) have not been clarified. In the present study, we investigated whether $H_2O_2$, reactive oxygen species (ROS), is modulated the messenger RNA (mRNA) expression and activity of LOX during odontoblastic differentiation of human dental pulp (HDP) cells. The mRNA expression was quantified by reverse transcriptase polymerase chain reaction (RT-PCR) analysis, and LOX enzyme activity was measured by high sensitive fluorescent assay. Expression of the odontoblastic differentiation marker genes were assessed in the presence and absence of specific small interfering RNAs (siRNAs) of the LOX and LOXL. The $H_2O_2$-induced mRNA expression of LOX family was significant reduction of LOX, LOXL, and LOXL3 mRNA levels in HDP cells. LOX enzyme activity was increased at $H_2O_2$ 0.3 mM for 24 hours. The mRNA expression of alkaline phosphatase (ALP), osteopontin (OPN), and osteocalcin (OCN) was inhibited by LOX- and LOXL-specific siRNAs whereas the mRNA expression of dentin matrix protein1 (DMP1), and dentin sialophosphoprotein (DSPP) was inhibited by LOX-specific siRNA. In LOX enzyme activity, siRNA-induced knockdown of both LOX and LOXL inhibited the total amine oxidase activity in HDP cells, as in the case of mRNA expression. In conclusion, the essential role of $H_2O_2$ on odontoblastic differentiation suggests that its regulation by LOX may have pharmacologic importance in HDP cells.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.2
• /
• pp.100-106
• /
• 2020

PURPOSE. The purpose of this in vitro study was to evaluate the fitting accuracy of single crowns made from a novel presintered Co-Cr alloy prepared with a computer-aided design and computer-aided manufacturing (CAD/CAM) technique, as compared with crowns manufactured by other digital and the conventional casting technique. Additionally, the influence of oxide layer on the fitting accuracy of specimens was tested. MATERIALS AND METHODS. A total of 40 test specimens made from Co-Cr alloy were investigated according to the fitting accuracy using a replica technique. Four different methods processing different materials were used for the manufacture of the crown copings (milling of presintered (Ceramill Sintron-group_cer_sin) or rigid alloy (Tizian NEM-group_ti_nem), selective laser melting (Ceramill NPL-group_cer_npl), and casting (Girobond NB-group_gir_nb)). The specimens were adapted to a resin model and the outer surfaces were airborne-particle abraded with aluminum oxide. After the veneering process, the fitting accuracy (absolute marginal discrepancy and internal gap) was evaluated by the replica technique in 2 steps, before removing the oxide layer from the intaglio surface of the crowns, and after removing the layer with aluminum oxide airborne-particle abrasion. Statistical analysis was performed by multifactorial analysis of variance (ANOVA) (α=.05). RESULTS. Mean absolute marginal discrepancy ranged between 20 ㎛ (group_cer_npl for specimens of Ceramill NPL) and 43 ㎛ (group_cer_sin for crowns of Ceramill Sintron) with the oxide layer and between 19 ㎛ and 28 ㎛ without the oxide layer. The internal gap varied between 33 ㎛ (group_ti_nem for test samples of Tizian NEM) and 75 ㎛ (group_gir_nb for the base material Girobond NB) with the oxide layer and between 30 ㎛ and 76 ㎛ without the oxide layer. The absolute marginal discrepancy and the internal gap were significantly influenced by the fabrication method used (P<.05). CONCLUSION. Different manufacturing techniques had a significant influence on the fitting accuracy of single crowns made from Co-Cr alloys. However, all tested crowns showed a clinically acceptable absolute marginal discrepancy and internal gap with and without oxide layer and could be recommended under clinical considerations. Especially, the new system Ceramill Sintron showed acceptable values of fitting accuracy so it can be suggested in routine clinical work.

• Journal of Korean society of Dental Hygiene
• /
• v.19 no.3
• /
• pp.387-397
• /
• 2019

Objectives: This study was conducted to examine the subjects' oral health status and changes in the oral environment after mouthwash with effervescent Vitamin C and its intake and to understand the impact on changes in the number of bacteria causing periodontal diseases in the oral cavity based on the oral health status and oral environmental condition. Methods: After obtaining approval from the Institutional Review Board of D-University, 45 people (24 in an experimental group and 21 in a control group) who participated in the oral health program were selected, among visitors of the Clinical Dental Hygienics Laboratory of D. University in B. Results: Based on the subjects' periodontal health status, the number of bacteria causing periodontal diseases in the oral cavity decreased in both experimental and control groups before and after the experiment. However, in the experimental group, it was significant when the Bleeding on Probing(BOP) level was below average, and Calculus index(CAL) was above average, in Aggregatibacter actinomycetemcomitans and the red complex. It was also significant when CAL was above average in the orange complex in the control group. Regarding bacterial changes in periodontal diseases based on the subjects' oral environmental condition, there was a significant change in the Adenosine Tri Phosphate (ATP : intraoral contaminants test) test in the oral cavity in A. actinomycetemcomitans and the red complex in the experimental group and in the O'Leary index in the control group. Further, there was a significant change in the orange complex in the ATP test in the experimental group. Conclusions: A comprehensive analysis of the results revealed that the oral health care program for dental hygiene decreased the number of bacteria causing periodontal diseases in the oral cavity in both experimental and control groups.

• Journal of dental hygiene science
• /
• v.16 no.5
• /
• pp.349-354
• /
• 2016

The purpose of this study was to evaluate the efficacy of the newly-developed $Qraypen^{TM}$ (All In One Bio, Korea) system for the diagnosis of early proximal caries by comparing it with the conventional methods of visual inspection and periapical radiography. This study was carried out from July 2015 to April 2016 targeting 32 children aged 7~12 years who visited Y-Dental Clinic for school oral health examinations. Two investigators selected and examined a total of 153 primary molars that had not undergone restorative treatment. Comparisons were carried out between visual inspections, readings of posterior periapical radiography images, and readings of $Qraypen^{TM}$ images. This study revealed that the percentage of interproximal surfaces of primary molar teeth without caries incidence was 83.7% using $Qraypen^{TM}$ imaging and 84.9% using visual inspection and periapical radiography. The differences between the two methods were not statistically significant. Thus, $Qraypen^{TM}$ is expected to be a useful and convenient auxiliary diagnostic device that can facilitate the detection of hidden proximal caries in primary molars.

• Journal of dental hygiene science
• /
• v.11 no.4
• /
• pp.311-317
• /
• 2011

The aim of this analysis was to investigate the relationship between the level of safety behavior and the level of oral health behavior among Korean children. Data used in this analysis were from the 2005 Korean National Health and Nutrition Examination Survey (KNHANES). A representative sample of 4,292 children aged from three to eleven years who completed both health interview and health behavior survey. Simple and multiple logistic regression analyses were conducted. All analyses were weighted and SAS 9.1 survey data analysis procedures were used to estimate standard errors accounting for the complex sampling design of the KNHANES. More than seventy percent of children did not keep general safety behaviors except seat on back seat in a car. About seventy five percent of children had experience of preventive oral care during last one year, but about fifty six percent of children brush their teeth twice a day. Socioeconomic status and health behaviors were significantly related in three to six old age group only (p<.05). Generally significant relationship was not found between general safety and oral health behaviors. Among Korean children, general safety and oral health behaviors might be not related each other. Education for general safety behaviors should be underlined for all children. Especially preschool-children with low socioeconomic status need to be educated for healthy behaviors.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.4
• /
• pp.245-251
• /
• 2013

Purpose: This study was conducted to compare in vivo biofilm formation on titanium surface and zirconia surface. Materials and methods: For biofilm formation on titanium and zirconia in oral cavity, after producing oral appliances using acrylic resin and orthodontic wire tailored to 9 subjects, we made titanium and zirconia specimens ($6mm{\times}6mm{\times}2mm$), fixed them on oral appliances and maintained them in oral cavity of test subjects for 24 and 72 hours. Test subjects who have equipped two pairs of specimens maintained oral hygiene not by using toothpaste but only by tooth brushing. After 24 and 72 hours, we removed and observed specimens through scanning electron microscopy (SEM). Results: Biofilm formation showed large deviation depending on individuals. For formation comparison between titanium and zirconia for 24 hours, zirconia showed less biofilm formation than titanium. Biofilm formation showed large deviation depending on individuals. As for formation comparison between zirconia and titanium, the degree of biofilm formation in zirconia was less than it was in titanium after a lapse of 24 hours. The result of biofilm formation in 72 hours trial show that zirconia has an inclination to formate less biofilm than it was in titanium. Conclusion: Based on the above results, we can conclude that early biofilm formation in oral cavity was influenced by difference of abutment materials.

• The korean journal of orthodontics
• /
• v.32 no.6 s.95
• /
• pp.435-441
• /
• 2002

Surgical microscrews were introduced and used as one method to provide absolute anchorage. Some clinicians implanted microscrews or miniscrews into the basal bone below the roots of the teeth to evade damage to the roots. Because the implanted microscrews were positioned too low the applied force was insufficient to retract the anterior teeth or protract the posterior teeth, and the use of microscrews or miniscrews seemed limited in applying vertical force. However Park implanted microscrews(micro-implants (1.2mm in diameter)) into the alveolar bone between the roots of the posterior teeth to change the direction of the applied force toward increasing horizontal component of the force. Moreover, these microscrew implants were positioned in the alveolar bone between the roots without causing discernable damage to the roots. This study was performed to provide guidelines and anatomic data to assist in the determination of the safe location for micro-implants. By measuring the CT images from 21 patients, anatomical data were obtained which were then used as a guide to determine the location for the implantation of micro-implants. The thickness of the cortical bones at the alveaolar bone region increased from the anterior to the posterior teeth area. The mandibular posterior teeth area showed thicker cortical bone. A greater distance was observed in distance between the second premolar root and first molar root in the upper arch, between the first molar root and the second molar root in the lower arch. The alveolar bone of the posterior teeth area is considered the best site for the implantation of micro-implants.

• The korean journal of orthodontics
• /
• v.38 no.6
• /
• pp.427-436
• /
• 2008

Objective: The purpose of this study is to compare landmark position between cephalometric radiography and midsagittal plane projected images from 3 dimensional (3D) CT. Methods: Cephalometric radiographs and CT scans were taken from 20 patients for treatment of mandibular prognathism. After selection of land-marks, CT images were projected to the midsagittal plane and magnified to 110% according to the magnifying power of radiographs. These 2 images were superimposed with frontal and occipital bone. Common coordinate system was established on the base of FH plane. The coordinate value of each landmark was compared by paired t test and mean and standard deviation of difference was calculated. Results: The difference was from $-0.14{\pm}0.65$ to $-2.12{\pm}2.89\;mm$ in X axis, from $0.34{\pm}0.78$ to $-2.36{\pm}2.55\;mm$ ($6.79{\pm}3.04\;mm$) in Y axis. There was no significant difference only 9 in X axis, and 7 in Y axis out of 20 landmarks. This might be caused by error from the difference of head positioning, by masking the subtle end structures, identification error from the superimposition and error from the different definition.

• Korean Journal of Organic Agriculture
• /
• v.20 no.2
• /
• pp.221-230
• /
• 2012

Rumen fermentative characteristic is useful indicators of the quality of ruminant feed stuffs and diets. An in vitro rumen fermentation experiment was therefore carried out to compare fermentation patterns among three forage sources. These were whole crop barley (WCBS), Italian ryegrass silage (IRGS) and rice straw silages (RSS). Rice straw (RS) was the control, making the treatments 4 in total. Forages were randomly allocated to serum bottles. The incubation times were arranged 0, 3, 6, 9, 12, 24, 48 and 72h at $39^{\circ}C$, respectively. Each forage source was replicated 3 times per incubation time. At each sampling time, total gas and pH were measured, whilst individual volatile fatty acids (VFAs), total volatile fatty acids (TVFAs) and ammonia nitrogen ($NH_3$-N) were determined later after storing samples at $-20^{\circ}C$. Acetate: Propionate ratio (A/P) was then calculated. Forage source had a significant effect (P<0.001) on pH and $NH_3$-N. RSS maintained higher pH values than the rest of the forage sources. A decreasing pH trend with increased time of incubation, in agreement with literature, was observed for all forage sources. WCBS recorded $NH_3$-N values higher than all the other treatments. Total gas, individual and total VFA and A/P ratio were not affected by forage source. However, there was a significant difference in all parameters (p<0.05) among forage sources at sampling periods at 3 to 72h. Therefore, the present results indicating that WCBS, IRGS, RS and RSS maintained in vitro rumen pH above the critical value. Also, WCBS produced the highest NH3-N and on this merit could be of better nutritive value, in vivo, in the ruminant.