• Journal of Internet Computing and Services
• /
• v.4 no.4
• /
• pp.65-74
• /
• 2003

Recently, It is required that multimedia data display on not only PC but also the Mobile device such as cellar phone, PDA. Mobile divieces has not sufficient of storage space or main memory and has slow network speed. So we can't process the multimedia data with the existing way on PC. This paper presents various methods for MultimediaPresentation which are able to display on the mobile device with the low-bandwidth and small storage. There Is an analysis that Is playable on the mobile device using presentation area devision method and replayable analysis method. If the display of multimedia presentation is impossible from this analysis, to apply prefetch techniques a using EPOB apoint and as User QoS of multimedia data through prefetch techniques have keep, do so that playable. Then, it is proposed to playable smooth multimedia presentation as that each of the presentations through prefetch Scheduling techniques point and quantity of data which are prefetch.

• Korean Journal of Optics and Photonics
• /
• v.14 no.6
• /
• pp.663-668
• /
• 2003

We studied a localized hologram recording method that can be used in a disk-shaped medium. In this method, the reference beam is focused by use of a cylindrical lens to get a thin spot in the medium, and then a hologram is recorded in that spot by illuminating the signal beam. Many localized holograms are multiplexed by shifting the medium by a distance more than the thin spot size of the reference beam. This method does not need recording-time scheduling for uniform diffraction efficiencies. We show that a minimal required thickness of the recording medium exists for a given spot size of the signal beam. We performed experiments for data storage and retrieval, and obtained a storage density of 20 bits/${\mu}{\textrm}{m}$$^2$ and a raw-bit error rate (RBER) of 2.5${\times}$10$^{-3}$ , when a 2 mm-thick Fe-doped LiNbO$_3$ crystal was used.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.3
• /
• pp.95-99
• /
• 2008

This paper proposes a new minimal resource high-level synthesis algorithm for low power design automation. The proposed algorithm executes an efficient approach to minimize the power consumption of the functional units in a circuit during the high level synthesis. In this paper, we visit all control steps one by one to reduce the switching activity in CDFG. The register sharing algorithm determines the minimum register after the life time analysis of all variable. According to property of input signal for functional unit, the proposed method visits all control step one by one and determines the resource allocation with minimal power consumption at each control step in a greedy fashion. The effect of the proposed algorithm has been proved through various filter benchmark to adopt a new scheduling and allocation algorithm considering the low rover.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.4
• /
• pp.457-466
• /
• 2013

Wind energy is rapidly becoming significant generating technologies in electricity markets. As probabilistic nature of wind energy creates many uncertainties in the short-term scheduling, additional actions for reliable market operation should be taken. This paper presents a novel approach to evaluate ramping capability requirement for changes in imbalance energy between day-ahead market and real-time market due to uncertainty of wind generation as well as system load. Dynamic ramp rate model has been applied for realistic solution in unit commitment problem, which is implemented in day-ahead market. Probabilistic optimal power flow has been used to verify ramping capability determined by the proposed method is reasonable in economic and reliable aspects. This approach was tested on six-bus system and IEEE 118-bus system with a wind farm. The results show that the proposed approach provides ramping capability information to meet both forecasted variability and desired confidence level of anticipated uncertainty.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.10
• /
• pp.2479-2496
• /
• 2013

Increasing demand for Full High-Definition (FHD) video and Ultra High-Definition (UHD) video services has led to active research on high speed video processing. Widespread deployment of multi-core systems has accelerated studies on high resolution video processing based on parallelization of multimedia software. Even if parallelization of a specific decoding step may improve decoding performance partially, such partial parallelization may not result in sufficient performance improvement. Particularly, entropy decoding has often been considered separately from other decoding steps since the entropy decoding step could not be parallelized easily. In this paper, we propose a parallelization technique called Integrated Multi-Threaded Parallelization (IMTP) which takes parallelization of the entropy decoding step, with other decoding steps, into consideration in an integrated fashion. We used the Simultaneous Multi-Threading (SMT) technique with appropriate thread scheduling techniques to achieve the best performance for the entire decoding step. The speedup of the proposed IMTP method is up to 3.35 times faster with respect to the entire decoding time over a conventional decoding technique for H.264/AVC videos.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.4
• /
• pp.611-615
• /
• 1992

Problems with maintaining service and equipment in some developing countries suggest that the rumen bag technique may be more appropriate for the determination of plant dry matter digestibility. The technique has been adapted for use in goats in the 16-25 kg liveweight range. Reliable results were obtained for animals maintained under shelter in cages and fed on a mixed legume/grass diet. The results showed that up to 7 bags containing dried and ground (2 mm screen) plant samples (1-3 g) could be satisfactorily used in each goat. The digestibility of the legumes studied did not increase with incubation times over 48 hours, but there was an increase in the digestibility of grasses. However an incubation time of 48 hours was adapted for both legumes and grasses as it allowed more efficient work scheduling for large numbers of samples while still giving acceptable comparisons between species. Losses of material from the bags during a 6 hour soaking in water were 2-9% as fine solids and 14-21% in solution. In the method finally adapted the disappearance was measured for plant samples that were placed in Dacron mesh bags ($7{\times}14cm$, 44 micron) and 6 bags suspended in the rumen of each sheep for 48 hours.

• Journal of Communications and Networks
• /
• v.16 no.1
• /
• pp.1-9
• /
• 2014

Block diagonalization (BD) has been proposed as a simple and effective technique in multiuser multiple-input multiple-output (MU-MIMO) broadcast channels. However, when channel state information (CSI) knowledge is limited at the transmitter, the performance of the BD may be degraded because inter-user interference cannot be completely eliminated. In this paper, we propose an efficient CSI quantization technique for BD precoded systems with limited feedback where users supported by a base station are selected by dynamic scheduling. First, we express the received signal-to-interference-plus-noise ratio (SINR) when multiple data streams are transmitted to the user, and derive a lower bound expression of the expected received SINR at each user. Then, based on this measure, each user determines its quantized CSI feedback information which maximizes the derived expected SINR, which comprises both the channel direction and the amplitude information. From simulations, we confirm that the proposed SINR-based channel quantization scheme achieves a significant sum rate gain over the conventional method in practical MU-MIMO systems.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.3
• /
• pp.187-195
• /
• 2017

The operation planning of transports used to move blocks is the one of key factors. Furthermore, reducing the running time through the effective plan contributes to pulling forward the whole logistic process of the shipyard and substantially saving the fuel consumption of itself as well. The past researches of the transporter focused on finding only the shortest distances, so called, Manhattan distance. However, these searching approaches cannot help having the significant difference in the real operational time and distance with the minimum cost approach which considers the speed retardation for turns or safety at the intersection. This study suggests the noble transporter's operational model which could take account of the consuming operational time around the crossroads on the shipyard. Concretely, the proposed method guarantees the minimization of transporters' turns and passage number which are huge burdensome to the operation time and the whole planning of transports with the given period. Resultantly, this paper is willing to explain the appropriateness of our approach, compared with the previous ones.

• International Journal of Control, Automation, and Systems
• /
• v.3 no.3
• /
• pp.493-501
• /
• 2005

A power plant simulation tool ('PowerSim') has been developed with 10 years experience from the development of a plant simulator for efficient modeling of a power plant. PowerSim is the first developed tool in Korea for plant simulation with various plant component models, instructor station function and the Graphic Model Builder (GMB). PowerSim is composed of a graphic editor using general purpose design software, a netlist converter, component models, the scheduler, Instructor Station and an executive. The graphic editor generates a netlist that shows the connection status of the various plant components from the Simdiagram, which is drawn by Icon Drag method supported by GUI environment of the PowerSim. Netlist Converter normalizes the connection status of the components. Scheduler makes scheduling for the execution of the device models according to the netlist. Therefore, the user makes Simdiagram based on the plant Pipe and Instrument Drawing (P&ID) and inputs the plant data for automatic simulating execution. This paper introduces Graphic Model Builder (GMB), instructor station, executive and the detailed introduction of thermal-hydraulic modeling. This paper will also introduce basic ideas on how the simulation Diagram, based on netlist generated from general purpose design software, is made and how the system is organized. The developed tool has been verified through the simulation of a real power plant.

• Women's Health Nursing
• /
• v.13 no.4
• /
• pp.262-271
• /
• 2007

Purpose: This study aimed to examine the relationship between pre and post operative sexual condition, differences in sexual attitude through post operational periods, and the relationship between sexual attitude and satisfaction. Method: Data was collected with questionares from 119 women registered in the gynecology department of a general hospital in Seoul who had undergone a hysterectomy. Result: There was a significant difference between the condition of pre and post operation coital frequency, sexual satisfaction, and spouse's attitude toward the extraction of the partner's uterus. There was a significant difference between their views of the operation. Twelve months after the operation sexual attitude of sexual aspects changed, but not in physical and psychological aspects. There was a significant difference between sexual attitude and satisfaction on sexual, psychological aspects, but not physical aspects. Conclusion: The findings suggest that a preliminary sexual condition be identified before surgery, scheduling the operation after helping a spouse gain a positive attitude about the hysterectomy, and couples in their 50's and older get counselling. Increased sexual satisfaction will develop with a belief in positive changes of sexual aspects, but a rapid change should not be expected.