• Korean Chemical Engineering Research
• /
• v.49 no.6
• /
• pp.710-714
• /
• 2011

In present work, $La_{0.8}Ca_{0.2}CrO_{3}$(LCC), $La_{0.8}Sr_{0.2}CrO_{3}$(LSC) and $La_{0.8}Ca_{0.2}CrO_{0.9}Co_{0.1}O_{3}$(LCCC) ceramic interconnect layer for SOFC were prepared by using thermal plasma spray coating process. The LCC, LSC and LCCC powders were characterized by x-ray diffraction(XRD), scanning electron microscopy(SEM), particle counter and BET analysis. In addition, basic and essential properties such as the surface morphology, cross section, gas leak rate, and electrical conductivity of LCC, LSC, and LCCC layers coated by thermal plasma spray coating process were analyzed and discussed. Based on these experimental results, it can be concluded that the LCCC layer coated by thermal plasma spray coating process can be suitable as a ceramic interconnect of SOFC.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.3
• /
• pp.186-191
• /
• 2016

The effects of $Eu^{3+}$ doping on the structural, morphological, and optical properties of $MgMoO_4:Dy^{3+},Eu^{3+}$ phosphors prepared by solid-state reaction technique were investigated. XRD patterns exhibited that all the synthesized phosphors showed a monoclinic system with a dominant (220) diffraction peak, irrespective of the content of $Eu^{3+}$ ions. The surface morphology of $MgMoO_4:Dy^{3+},Eu^{3+}$ phosphors was studied using scanning electron microscopy and the grains showed a tendency to agglomerate as the content of $Eu^{3+}$ ions increased. The excitation spectra of the phosphor powders were composed of a strong charge transfer band centered at 294 nm in the range of 230~340 nm and two intense peaks at 354 and 389 nm, respectively, arising from the $^6H_{15/2}{\rightarrow}^6P_{7/2}$ and $^6H_{15/2}{\rightarrow}^4M_{21/2}$ transitions of $Dy^{3+}$ ions. The emission spectra of the $Mg_{0.85}MoO_4$:10 mol% $Dy^{3+}$ phosphors without incorporating $Eu^{3+}$ ions revealed a strong yellow band centered at 573 nm resulting from the $^4F_{9/2}{\rightarrow}^6H_{13/2}$ transition of $Dy^{3+}$. As the content of $Eu^{3+}$ was increased, the intensity of the yellow emission was gradually decreased, while that of red emission band located at 614 nm began to appear, approached a maximum value at 10 mol%, and then decreased at 15 mol% of $Eu^{3+}$. These results indicated that white light emission could be achieved by controlling the contents of the $Dy^{3+}$ and $Eu^{3+}$ ions incorporated into the $MgMoO_4$ host crystal.

• Korean Chemical Engineering Research
• /
• v.45 no.6
• /
• pp.633-637
• /
• 2007

Electroless plating of Co-alloy thin films as capping layers for Cu interconnection has been investigated using alkali-free precursors such as $(NH_4)_2Co(SO_4)_2{\cdot}6H_2O$, $(NH_4)_2WO_4$, $(NH_4)H_2PO_4$, etc. The characteristics of the Co-alloy thin films were discussed by analyses of the effects of pH, Co-precursor concentration, and deposition temperature on the thickness and surface morphology of the films. The thickness of the Co-alloy thin films increased with increasing pH, Co-precursor concentration, and deposition temperature, similarly to the results of electroless plating of Co-alloy thin films using alkali-containing chemicals. The SEM images of the surface of the Co-alloy thin films showed that the proper ranges of pH and deposition temperature were 8.5~9.5 and $75{\sim}85^{\circ}C$, respectively. This work found a feasibility that Co-alloy thin films as capping layers for Cu interconnection could be electroless plated using alkali-free chemicals.

• Korean journal of applied entomology
• /
• v.45 no.2 s.143
• /
• pp.119-129
• /
• 2006

The antennal receptors of the adult male and female of the American leafminer, Liriomyza trifolii (Diptera: Agromyzidae) was studied using the scanning electron microscopy. This antennal receptors were developed to accept the chemical or mechanical signal in the environment. The antennae of L. trifolii is 317.52 $\mu$m long and composed of the scape, pedicel, funicle, arista. Antennae located between compounds eye on the middle in the head. The result of SEM observation, four types of receptors were characterized and grouped into morphological classes: Trichoid, Basiconic, Coeloconic, Chetiform sensilla. Trichoid sensilla are located on the all segment. As a rule, female is more than male. This sensilla are long and slender hair with straight or slightly curved, and taper to a sharp point apically. Basiconic sensilla are observed only on the funicle. The number of basiconic sensilla in male and female are almost same in both sexes. This sensilla are long and thick hair with stright or slightly curved, and taper to a blunt point apically. Coeloconic sensilla are observed only on the funicle. This sensilla were showed a finger-like projections the peg apex. The number of basiconic sensilla in male and female are almost same in both sexes. Chetifarm sensilla are located on the all segment. This sensilla are needle-like, tapering sharply. Pedicel are more than scape. The number of Chetiform sensilla in male and female are almost same in both sexes.

• Korean journal of applied entomology
• /
• v.27 no.2
• /
• pp.94-102
• /
• 1988

Studies were carried out to describe the structure and distribution of various sensilla on the antenna and mouthparts of the Oriental tobacco bud worm (H. assulta) larvae by light and scanning electron microscopy. The larval antenna has 3 segments. The second segment has 2 hairs and 3 pegs, while the third segment shows 3 regular pegs and a segmented peg (styloconicum type). Each mandible bears 2 aporous hairs on the lateral surface. The labrum bears 12 aporous hairs on its external surface. and 6 aporous hairs, 4 coeloconica-like sensilla and 2 campaniformia-like sensilla on its epipharynx. The stipes has 3 hairs, and the galea has 3 pegs. 2 papillae and 2 domes. The maxillary palpus has only a digitiform sensillum on its 1st segment but 11 sensilla of 4 different types on its 2nd segment. Maxillary sensilla represent almost 70% of total number of larval sensilla on the mouthparts. Labial pal pus has a single segment bearing a large segmented uniporous peg and a small peg. Finally their possible fun¬ctions were suggested.

• Korean Journal of Plant Taxonomy
• /
• v.33 no.3
• /
• pp.255-270
• /
• 2003

Pollen morphology of four genera (Daphne L. - 4 spp., Edgeworthia Meisn. - 1 sp., Wikstroemia Endl. - 2 spp., and Stellera L. 1 sp.), except 1 taxon (Diarthron Turcz. - 1 sp.) in Korean Thymelaeaceae were examined with light (LM) and scanning electron microscopy (SEM). The size of grains ($11.3-60.0{\mu}m$) are varied from small (in Stellera) through medium (in Daphne and Wikstroemia) to large (in Edgeworthia). All studied taxa have monad, spheroidal, pantoporate (10-20) grains. The exine is reticulate, especially a typical "croton pattern" which is comprising rings of more or less trihedral subunits. Each triangular subunit is topped by a single microspinule, and the surface pattern is psilale. In Daphne, three types of subunit arrangement can be recognized; - (1) Type I : subunits are arranged circles and attached to each other or sometimes fused in part, (2) Type II: each subunit is trihedral and isolated distinctly, and (3) Type III: each subunit is isolated, but somewhat vague. Systematic implication of the present pollen data for the Korean Thymelaeaceae is also briefly discussed.

• Korean Journal of Plant Taxonomy
• /
• v.38 no.4
• /
• pp.389-403
• /
• 2008

Seed morphological studies of 12 species of sect. Zygophyllidium and related Poinsettia using light and scanning electron microscopy were conducted to test the hypotheses of the sectional boundaries and species relationships. Characteristics of seeds, and the keys of identification of 12 species were presented. Seeds of 12 species were divided into 6 types based on the UPGMA tree from numerical analyses using nine seed characters. Type I, including E. uniglandulosa, is characterized by the foveolate seed with granulate testa cells. Type II, including species E. exstipulata, E. lagunensis, E. bilobata, E. hexagonoides and E. chersonesa, was recognized by the presence of inter-cellular granules among testa cells. Type III, including E. cyathophora, has a seed with acute apex, and concentric circles on the surface of testa cells. Type IV, including species of E. dentata and E. pentadactyla, has a seed with caruncle and lacking inter-cellular granules among testa cells. Type V, including E. hexagona, was characterized by the ovate seeds and lacking inter-cellular granules. Type VI, including E. eriantha and E. lacera, was recognized by the seeds with rectangular shape with caruncle. Based on the seed morphology, sect. Zygophyllidium should be defined only species with E. exstipulata, E. lagunensis, E. bilobata, E. hexagonoides and E. chersonesa. E. hexagona, traditionally included in this section, was closely related to E. dentata from Poinsettia.

• Korean Journal of Plant Taxonomy
• /
• v.40 no.1
• /
• pp.50-58
• /
• 2010

The nutlet morphology and pericarp structure of 14 taxa (4 taxa of the genus Glechoma and related taxa) were studied by light and scanning electron microscopy, and a detailed description of nutlet morphological features for all examined taxa is provided. The shape of the nutlet is ovate to elliptic. Its size is 1.36-3.83 mm in length and 0.80-2.65 mm in width. The largest one was found in Marmoritis rotundifolia, while the smallest one was in Agastache nepetoides. Three different surface types were recognized in the studied taxa based on differences in cell outline and cell boundary relief (rectangular, pitted, and ridged negative reticulate-cell). Three types of trichome (uni-cellular non-glandular trichome, multi-cellular non-glandular trichome, and peltate glandular trichome) were distributed in the nutlets. The pericarp is formed in three layers (i.e., exocarp, mesocarp, and endocarp including sclenchyma tissue), and the pericarp in the studied species is $39.0-237.5{\mu}m$ thick. The morphological and anatomical features (the nutlet shape, surface type, and trichome distribution) in the genus Glechoma and related taxa are described and discussed.

• Journal of dental hygiene science
• /
• v.16 no.1
• /
• pp.93-100
• /
• 2016

The purpose of this study was to compare the changes of retentive force in different stud attachment systems for implant retained overdenture. Two commercially available attachments with different retentive forces were investigated: Kerator (pink, blue, red) and O-ring (orange, red). Two implant fixtures were vertically embedded in base mountings. Five pairs of each attachment were evaluated. A universal testing machine was used to evaluate the retentive force of two attachments during wear simulation. Surface characteristics of each attachment system were evaluated with scanning electron microscopy. Five pairs of each attachment were evaluated. Kerator pink showed the highest initial retention. After 2,500 cycles of wear-simulation, Kerator pink noted the largest decrease in retention. According to results of surface analysis, Worn surfaces were obtained in matrices and patrices. Heavy wears were observed in matrices. After 2 year-wear simulation, most attachments exhibited retention loss. Attachments using different kind of material exhibited dissimilar surface alterations.

• Journal of dental hygiene science
• /
• v.9 no.4
• /
• pp.405-412
• /
• 2009

The purpose of this study investigated the effect of Au coating on adhesion between porcelain matrix and metal substructure interface. Titanium, Ni-Cr alloy and Co-Cr alloy are well known as proper metal for the dental restorations. The success of a porcelain fused to metal (PFM) restoration depends upon the quality of the porcelain-metal bond. However, adhesion between dental alloys and porcelain is related to diffusion of oxygen during ceramic firing. The excessive oxidized layers make hard adhesion between dental alloy and ceramic. Ni-Cr and Co-Cr specimens were divided into test and a control group and Titanium specimens were divided into three test groups and a control group. Each group had 20 specimens. The adhesion characteristics of porcelain and metal with Au coating layer and without Au coating layer were observed with scanning electron microscopy(SEM). The adhesion was evaluated by a biaxial flexure test and volume fraction of adherent porcelain was determined by SEM/EDS analysis. Result of this study suggest that Au coating layer is effective barrier to diffuse oxide layer completely protect non-precious alloys from oxidation during the porcelain firing. The SEM photomicrographs of cross-section specimens showed a smooth interface between Au coating layer and metals and porcelain which suggested proper chemical bonding, and no gap, porosity were observed. The mode of failure was mainly adhesive for Ti tested specimens, but mixed failures with adhesive and cohesive were observed in Ni-Cr and Co-Cr specimens. The adhesion between non-precious metals and porcelain would not be improved by Au coating agent. However, It is suggested that the continuous study is required further investigation and development.