• Journal of Sensor Science and Technology
• /
• v.13 no.1
• /
• pp.66-71
• /
• 2004

Pt-doped zinc oxide (ZnO:Pt) films were deposited by ultrasonic spray pyrolysis. Resistivity variation with Pt concentration was measured. The Pt distribution in ZnO:Pt films was studied through Auger Electron Spectroscopy (AES). The ZnO:Pt films were annealed in the ambient of air, water vapor and ozone, respectively. The variation in crystallographic properties and surface morphologies with respect to the annealing condition was observed by X-Ray Diffraction (XRD) and Scanning Electron Microscopy (SEM). The resistivity variation of the films with the annealing condition was measured. Finally, Atomic Force Microscopy (AFM) measurements were carried out to study the effects of the annealing on the roughness of ZnO:Pt films.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.287-287
• /
• 2007

The ferroelectric and electric properties of UV-irradiated bismuth lanthanum titanate (BLT) films prepared using photosensitive starting precursors were characterized. The effects of lanthanum doping on ferroelectric and electric properties were investigated by polarization-electric field hysteresis loops and leakage current-voltage measurements. X-ray diffractometer and ellipsometry were served to provide the information about the crystalline structure and thickness of the films after annealing. The images of the surface microstructure and direct-patterned BLT films were observed by using scanning electron microscopy. The effects of lanthanum doping on the electric properties of direct-pattern able BLT films and their direct-patterning were studied.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.140-140
• /
• 2000

The initial growth mode of Nb on Ag(11) in sub-monolayer regime and the influence of subsequent 520K annealing are studied using UHV Scanning Tunneling Microscopy. E-beam evaporated Nb is deposited onto the substrate at RT, and STM measurements are carried out at RT and 78 K. With Nb being immiscible in bulk Ag, 3D islands formation begins at early stage and no particular ordered structure is found. After annealing to 520K, most of islands are disappeared from terrace. There exist 2 possibilities. : (1) Diffusion of Nb into the 2nd or 3rd layer of Ag substrate or (2) agglomeration of Nb on Ag at higher temperature. A model will be given to explain the evidence. In addition, we investigated the change of STM image according to bias voltage depending on island size. Possible physical mechanism responsible for such behavior together with interaction between Nb islands and reactive gases will be also discussed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.384-384
• /
• 2010

Zirconium oxynitride films were obtained by r.f. reactive magnetron sputtering of a zirconium target with nitrogen flow rate ranging from 0 to 60 sccm. The phases present in the films were determined by X-ray diffraction (XRD). Measurements of the oxidation state $ZrON_x$ films were investigated by X-ray photoelectron spectroscopy (XPS) and Auger electron spectroscopy (AES). Thickness of these samples was estimated by spectroscopic ellipsometry (SE) and scanning electron microscopy (SEM). We found that the surface morphology of $ZrON_x$ films measured by atomic force microscopy (AFM) was also depended on the nitrogen gas flow.

• Journal of Veterinary Clinics
• /
• v.25 no.6
• /
• pp.466-470
• /
• 2008

The purpose of this study is to investigate whether the effects of topically applied petrolatum and glycerin on the barrier repair of acetone-induced skin damage in 6 beagle dogs. To confirm the effects of petrolatum and glycerin on acetone disrupted skin models, we performed to evaluate the characteristics of transepidermal water loss and SC hydration and scanning electron microscopic observations. TEWL and SC hydration measurements were carried out 3, 6, 12, 24, 48h after applying petrolatum and glycerin during recovery from acute disruption. Our results showed that there were some different effects between petrolatum and glycerin on the acetone damaged skin such as barrier function repair process and SC hydration status. The results indicate that the significant improvement could be observed in glycerin apply more than petrolatum after acetone damages, and further study will be required.

• Preventive Nutrition and Food Science
• /
• v.3 no.2
• /
• pp.203-209
• /
• 1998

The development of methods for the identification of irradiated foods helps enforce national and international regulations on labelling to ensure the consumer's free choice to buy irradiated or unirradiated foods. and the availabilityof such methods may assist the promotion of international trade in irradiated food products and help prevent abuse of the technology. A number of approaches to determine the physical , chemical, microbiological and biological changes that occur in foods treated with ionizing radiation have been studied. However no single method is universally applicable. Among physical measurements, the leading methods of indentification are electron spin resonance (ESR) spectroscopy and thermoluminescence(TL). ESR is an established non-destructive method for the analysis of free radicals from their traps and TL is the emission of light from irradiated mineral extracts by heating. Viscosity of carbohydrate polymers by causing chain breaks by irradiation, measuring the impedance of potatoes and detection of gases produced radiolytically are promising techniques for identification purposes. Irradiated water-containing foods show significant supercooling when monitored with a differential scanning calorimeter (DSC), which can be applied to identifying irradiated ones.

• Journal of Industrial and Engineering Chemistry
• /
• v.68
• /
• pp.209-219
• /
• 2018

Colloidally stable organic-inorganic (O-I) hybrid nanoparticles could be prepared using an alkoxysilanefunctionalized amphiphilic polymer (AFAP) precursor. O-I hybrid sols could maintain colloidal stability for six months even at 45% solid content and be coated onto glass as well as PET film to form transparent O-I hybrid films. The formation of O-I hybrid nanoparticles dispersed in cured coating films could be confirmed using scanning electron microscopy. The cured coating film showed 3H and 5H pencil hardness on PET and glass, respectively. Nanoindentation measurements also showed that their modulus and hardness was varied with the type of AFAP used in its preparation.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.12
• /
• pp.1187-1192
• /
• 2000

Ternary (Mo-Ru-Pd) and binary (Mo-Ru, Mo-Pd) alloys have been prepared using an Ar arc melting furnace. Mo and the noble metals, Ru and Pd, are the constituents of metallic insoluble residues, which were found in the early days of post-irradiation studies on uranium oxide fuels. In the present study, the structure of the alloys was evaluated using a powder X-ray diffractometer. Unit cell parameters were determined by least squares refinements of powder X-ray diffraction data. Scanning electron microscopic analyses of the surface of the alloys indicated that surface morphology was dependent on the crystallographic structure as well as its composition. Measurements of the magnetic susceptibility of the alloys showed evidence of superconducting transition from 3 to 9.2 K. Among the ternary and binary alloys, the ${\sigma}-phase$ showed the highest superconducting transition temperature,~9.2 K.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.11
• /
• pp.1329-1334
• /
• 1999

The curing characteristics of diglycidyl ether of bisphenol A (DGEBA) with diaminodiphenylmethane (DDM) as a curing agent were studied using differential scanning calorimetry (DSC), rheometrics mechanical spectrometry (RMS), and dielectric analysis (DEA). The isothermal curing kinetics measured by DSC were well represented with the generalized auto-catalytic reaction model. With the temperature sweep, the inverse relationship between complex viscosity measured by RMS and ionic conductivity obtained from DEA was established indicating that the mobility of free ions represented by the ionic conductivity in DEA measurement and the chain segment motion as revealed by the complex viscosity measured from RMS are equivalent. From isothermal curing measurements at several different temperatures, the ionic conductivity contribution was shown to be dominant in the dielectric loss factor at the early stage of cure. The contribution of the dipole relaxation in dielectric loss factor became larger as the curing further proceeded. The critical degrees of cure, at which the dipolar contribution in the dielectric loss factor starts to appear, increases as isothermal curing temperature is increased. The dielectric relaxation time at the same degree of cure was shorter for a sample cured at higher curing temperature.

• KEPCO Journal on Electric Power and Energy
• /
• v.5 no.3
• /
• pp.197-200
• /
• 2019

We report on electrochemical signal amplification using gap electrodes based on the redox cycling between gap electrodes. The distance between electrodes was controlled from $2{\mu}m$ to a few hundreds of nanometer by chemical deposition of reduced Au ion on the pre-defined electrodes. Enhanced redox current of ferri/ferrocyanide was obtained by redox cycling between the two working electrodes. The faradaic current is amplified about a thousand times in this redox system. Since the signal amplification is due to the shortened diffusion length between the two electrodes, the narrower the nanogap was, the better detection limit, calibration sensitivity, and dynamic range. The experimental results were discussed on the basis of the cyclic voltammetry (CV), atomic force microscope (AFM) and scanning electron microscope (SEM) measurements.