• Journal of Periodontal and Implant Science
• /
• v.36 no.1
• /
• pp.69-84
• /
• 2006

Reports on the comparison of clinical effect between non-surgical and surgical therapy, and the change of the clinical parameters during maintenance phase have been rarely presented in Korea. This study was to observe the clinical changes during maintenance phase of 6 months in patients with chronic periodontitis treated by non-surgical or surgical therapy in Department of Periodontics, Chonnam National University Hospital. Among the systemically healthy and non-smoking patients with moderate to severe chronic periodontitis, twenty eight patients (mean age: 47.5 years) treated by non-surgical therapy (scaling and root planning) and nineteen patients (mean age: 47.3 years) treated by surgical therapy (flap surgery) were included in this study. The periodontal supportive therapy including recall check and oral hygiene reinforcement was started as maintenance phase since 1 month of healing after treatment. Probing depth, gingival recession. clinical attachment level and tooth mobility were recorded at initial, baseline and 1, 2, 3 and 6 month of maintenance phase. The clinical parameters were compared between the non-surgical and surgical therapies using Student t-test and repeated measure ANOVA by initial probing depth and surfaces. Surgical therapy resulted in greater change in clinical parameters than non-surgical therapy. During the maintenance phase of 6 months, the clinical effects after treatment had been changed in different pattern according to initial probing depth and tooth surface. During maintenance phase, probing depth increased more and gingival recession increased less after surgical therapy, compared to non-surgical therapy. The sites of initial probing depth less than 3 mm lost more clinical attachment level, and the sites of initial probing depth more than 7 mm gained clinical attachment level during maintenance phase after non-surgical therapy, compared to surgical therapy. Non-surgical therapy resulted in greater reduction of tooth mobility than surgical therapy during maintenance phase. These results indicate that the clinical effects of non-surgical or surgical therapy may be different and may change during the maintenance phase.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.36.2-37
• /
• 2016

We study the long-term radio variability of 43 radio bright AGNs by exploiting the data base of the University of Michigan Radio Astronomy Observatory (UMRAO) monitoring program. The UMRAO database provides high quality lightcurves spanning 25 - 32 years in time at three observing frequencies, 4.8, 8, and 14.5 GHz. We model the periodograms (temporal power spectra) of the observed lightcurves as simple power-law noise (red noise, spectral power $P(f){\propto}f^{-{\beta}}$ using Monte Carlo simulations, taking into account windowing effects (red-noise leak, aliasing). The power spectra of 39 (out of 43) sources are in good agreement with the models, yielding a range in power spectral index (${\beta}$) from ${\approx}1$ to ${\approx}3$. We find a strong anti-correlation between ${\beta}$ and the fractal dimension of the lightcurves, which provides an independent check of the quality of our modelling of power spectra. We fit a Gaussian function to each flare in a given lightcurve to obtain the flare duration. We discover a correlation between ${\beta}$ and the median duration of the flares. We use the derivative of a lightcurve to obtain a characteristic variability timescale which does not depend on the assumed functional form of the flares, incomplete fitting, and so on. We find that, once the effects of relativistic Doppler boosting on the observed timescales are corrected, the variability timescales of our sources are proportional to the black hole mass to the power of ${\alpha}=1.70{\pm}0.49$. We see an indication for AGNs in different regimes of accretion rate, flat spectrum radio quasars and BL Lac objects, having different scaling relations with ${\alpha}{\approx}1$ and ${\approx}2$, respectively. We find that modelling the periodograms of four of our sources requires the assumption of broken powerlaw spectra. From simulating lightcurves as superpositions of exponential flares we conclude that strong overlap of flares leads to featureless simple power-law periodograms of AGNs at radio wavelengths in most cases (The paper is about to be submitted to ApJ).

• Korean journal of applied entomology
• /
• v.54 no.4
• /
• pp.335-343
• /
• 2015

One of the primary concerns about the environmental risks of genetically modified (GM) crops is that they may have adverse effects on the local arthropod communities. In this study, we investigated whether the arthropod diversity and community structure in fields of GM rice tolerant to protoporphyrinogen oxidase (PPO)-inhibiting herbicides differ from those in non-GM (control) rice fields. The aim of this study was to assess the potential adverse effects of GM rice on the local arthropod communities. During the growing seasons in the study period, we collected arthropods from both fields by using yellow sticky traps and compared the diversity and community structure of arthropods from the two sites. Overall, the GM rice had no significant effect on the diversity of the local arthropod communities. In addition, multivariate analyses (permutational multivariate analysis of variance and nonmetric multidimensional scaling) showed that the structures of arthropod communities were not affected by the rice genotype (GM vs. non-GM), although these comparisons were made using data obtained at different sampling dates.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.1
• /
• pp.42-48
• /
• 2001

Over two decades, many researchers have performed studies on strength size effects in composite laminates under tensile and flexural loads. It is well known that there is a tendency for the strength of fibre-reinforced composites to decrease with increasing specimen size. Under compressive load, however, little work has been done on the effect of specimen size to failure strength. This is due to the fact that compressive testing of composite is very difficult. In this paper, the effect of the test specimen size on the compressive strength of composites containing open hole was considered using T300/924C, $>[45/-45/0/90]_{3S}$. For sizing test specimens, the in-plane scaling method is used i.e., the change of two- dimensional specimen area in specimen width and gauge length. The results clearly show that there is a hole size effect in the finite width plates. In addition, the specimens which have the same a/W(hole diameter/specimen width) exhibit a tendency of size effect. In contrast, test results of the unnotched specimens did not show a clear strength size effect.

• Journal of Ecology and Environment
• /
• v.29 no.4
• /
• pp.323-330
• /
• 2006

We investigated the impact of watermelon grafted onto Cucumber Green Mottle Mosaic Virus (CGMMV)-resistant transgenic watermelon rootstock on insects as non-target organisms in a greenhouse in 2005. We quantitatively collected insect assemblages living on leaves and flowers, and we used sticky traps to collect alate insects. We compared the patterns of insect assemblages and community composition, cotton aphid (Aphis gossypii Glover) on watermelon leaves and western flower thrip (Frankliniella occidentalis Trybom) on watermelon male flowers, between CGMMV-resistant transgenic watermelon (TR) and non-transgenic watermelon (nTR). Non-parametric multidimensional scaling (NMS) ordination verified that insect assemblages on leaves and sticky traps were different between TR and nTR (P<0.05). The insect assemblages on male flowers were not statistically significant. Multi-response permutation procedures proofed our results from NMS results (P>0.05). Conclusively, TR watermelons appear to have some adverse effects on the population of cotton aphids on leaves and sticky traps, but watermelon male flowers do not show an adverse effect. Further research is required to assess the effect of TR on the aphid and western flower thrip. Life table experiments might support the specific reason for the adverse effects from leaf assemblages. Assessment of non-target impacts is an essential part of the risk assessment of non-target insects for the impact of transgenic organisms.

• Journal of Korean society of Dental Hygiene
• /
• v.19 no.5
• /
• pp.777-789
• /
• 2019

Objectives: The purpose of this study was to investigate the relationship between oral health factors and suicidal ideation in adolescents in order to provide basic data for adolescent suicide prevention and oral health promotion. Methods: This study used data from the Korea Youth Risk Behavior Web-Based Survey held in 2017, in which a total of 62,276 youth participated. Data were analyzed by SPSS Ver. 22.0. Complex logistic regression analysis was used to analyze oral health factors related to suicidal ideation. Results: The effects of oral health on male students' suicidal ideation were as follows: brushing teeth 2-3 times a day was associated with decreased suicidal ideation (p<0.01), while suicidal ideation was increased in individuals who had experienced scaling within the past year (p<0.001), or, among experiences of oral disease within the last year, had reported prickling and throbbing pain (p<0.001), pain on the tongue and inside the cheeks (p<0.001), or bad breath (p<0.001). The effects of oral health on female students' suicidal ideation were as follows: brushing teeth 2-3 times a day was associated with decreased suicidal ideation (p<0.001), while suicidal ideation was increased in individuals who, among experiences of oral disease within the last year, had reported pain when chewing (p<0.001), pain on the tongue and inside the cheeks (p<0.01), or bad breath (p<0.001). Conclusions: The above results demonstrate that adolescent suicidal ideation and oral health factors are correlated, and it will be necessary to incorporate oral health interventions when planning or developing projects and programs for suicide prevention in adolescents.

• Journal of Periodontal and Implant Science
• /
• v.52 no.1
• /
• pp.39-53
• /
• 2022

Purpose: This study evaluated the systemic and local effects of doxycycline (DOX) and low-intensity laser (LIL) treatment as adjuvants to scaling and root planing (SRP) in the treatment of experimental periodontitis in rats. Methods: The sample consisted of 180 male rats (Rattus norvegicus albinus, Wistar), of which 30 did not receive induction of periodontal disease (negative control [NC] group) and 150 received induction of periodontal disease in the lower first molar. After 7 days, the ligature was removed, and the animals were divided into the following groups: NT (no treatment), SRP (SRP), DOX (SRP and DOX irrigation), LIL (SRP and laser irradiation), and DOX+LIL (SRP, DOX, and LIL). The animals were euthanized at 7, 15, and 30 days; thereafter, biochemical, radiographic, histological, and immunohistochemical analyses were performed. Results: In the intragroup analysis, lower concentrations of α-1-glycoprotein acid (α-1-Ga) and complement 3 (C3) were observed in the DOX+LIL group than in all other groups at all time points, as well as lower levels of complement 4 (C4) at 15 and 30 days (P<0.001). Less bone loss was observed in the DOX, LIL, and DOX+LIL groups than in the NC and SRP groups at all time points (P<0.001). There was a smaller number of tartrate-resistant acid phosphatase (TRAP)-positive cells in the DOX+LIL group than in the other groups at all time points (P<0.001). Positive correlations were observed between the systemic levels of α-1-Ga, C3, and C4 and the number of TRAP-positive cells. Conclusions: The combination of DOX with LIL as SRP adjuvants was effective both systemically and locally for the treatment of experimental periodontitis in rats.

• Journal of Periodontal and Implant Science
• /
• v.42 no.3
• /
• pp.88-94
• /
• 2012

Purpose: The use of appropriate instruments to clean surfaces with minimal change, is critical for the successful maintenance of a dental implant. However, there is no consensus about the type and methodology for such instruments. The aim of this study was to characterize changes in the roughness of titanium surfaces treated by various scaling instruments. Methods: Thirty-seven identical disks (5 mm in diameter) were investigated in this study. The specimens were divided into eight groups according to the types of instrumentation and the angle of application. Ultrasonic scaling systems were applied on a titanium disk to simulate standard clinical conditions. The equipment included a piezoelectric ultrasonic scaler with a newly developed metallic tip (NS group), a piezoelectric ultrasonic scaler with a conventional tip (CS group), a piezoelectric root planer ultrasonic scaler with a conventional tip (PR group), and a plastic hand curette (PH group). In addition, the sites treated using piezoelectric ultrasonic scaler systems were divided two sub-groups: 15 and 45 degrees. The treated titanium surfaces were observed by scanning electron microscopy (SEM), and the average surface roughness (Ra) and mean roughness profile depth (Rz) were measured with a profilometer. Results: SEM no significant changes in the titanium surfaces in the NS group, regardless of the angle of application. The PH group also showed no marked changes to the titanium surface, although some smoothening was observed. All CS and PR sites lost their original texture and showed irregular surfaces in SEM analysis. The profilometer analysis demonstrated that the roughness values (Ra and Rz) of the titanium surfaces increased in all, except the PH and NS groups, which showed roughness decreases relative to the untreated control group. The Ra value differed significantly between the NS and PR groups (P<0.05). Conclusions: The results of this study indicated that changes in or damage to titanium surfaces might be more affected by the hardness of the scaler tip than by the application method. Within the limitations of this study, the newly developed metallic scaler tip might be especially suitable for peri-implant surface decontamination, due to its limited effects on the titanium surface.

• The Korean Journal of Applied Statistics
• /
• v.26 no.5
• /
• pp.847-856
• /
• 2013

We propose a modified learning process for generalized neural network using a learning algorithm by Liu et al. (2001). We consider the effect of initial weights, training results and learning errors using a modified learning process. We employ an incremental training procedure where training patterns are learned systematically. Our algorithm starts with a single training pattern and a single hidden layer neuron. During the course of neural network training, we try to escape from the local minimum by using a weight scaling technique. We allow the network to grow by adding a hidden layer neuron only after several consecutive failed attempts to escape from a local minimum. Our optimization procedure tends to make the network reach the error tolerance with no or little training after the addition of a hidden layer neuron. Simulation results with suitable initial weights indicate that the present constructive algorithm can obtain neural networks very close to minimal structures and that convergence to a solution in neural network training can be guaranteed. We tested these algorithms extensively with small training sets.

• Composites Research
• /
• v.17 no.4
• /
• pp.7-17
• /
• 2004

In this study, the effect of laminate thickness on the compressive behaviour of composite materials is investigated through systematic experimental work using the stacking sequences, $[O_4]_{ns},{\;}[45/0/-45/90]_{ns}$ and $[45_n/0_n/-45_n/90_n]_s$ (n=2 to 8). Parameters such as fibre volume fraction, void content, fibre waviness and interlaminar stresses, influencing compressive strength with increasing laminate thickness are also studied experimentally and theoretically. Furthermore the stacking sequence effects on failure strength of multidirectional laminates are examined. For this purpose, two different scaling techniques are used; (1) ply-level technique $[45_n/0_n/-45_n/90_n]s$ and (2) sublaminate level technique $[45/0/-45/90]_{ns}$. An apparent thickness effect existes in the lay-up with blocked plies, i.e. unidirectional specimens ($[O_4]_{ns}) and ply-level scaled multidirectional specimens ($[45_n/0_n/-45_n/90_n]_s$). Fibre waviness and void content are found to be main parameters contributing to the thickness effect on the compressive failure strength. However, the compressive strength of the sublaminate level scaled specimens ($[45/0/-45/90]_{ns}$) is almost unaffected regardless of the specimen thickness (since ply thickness remains constant). From the investigation of the stacking sequence effect, the strength values obtained from the sublaminate level scaled specimens are slightly higher than those obtained from the ply level scaled specimens. The reason for this effect is explained by the fibre waviness, void content, free edge effect and stress redistribution in blocked $0^{\circ}$ plies and unblocked $0^{\circ}$ plies. The measured failure strengths are compared with the predicted values.