• Title/Summary/Keyword: scaling assessment

Search Result 130, Processing Time 0.031 seconds

Scaling of ground motions from Vrancea (Romania) earthquakes

  • Pavel, Florin;Vacareanu, Radu
    • Earthquakes and Structures
    • /
    • v.11 no.3
    • /
    • pp.505-516
    • /
    • 2016
  • This paper evaluates the scaling of ground motions recorded from nine intermediate-depth earthquakes produced in the Vrancea seismic zone in Romania. The considered ground motion database consists of 363 horizontal recordings obtained on soil classes B and C (according to Eurocode 8). An analysis of the inter- and intra-event spectral accelerations is performed in order to gain information regarding the magnitude and distance scaling of the Vrancea ground motions. The analyses reveal a significant influence of the earthquake magnitude and focal depth on the distance scaling and different magnitude and distance scaling for the two soil classes. A linear magnitude and distance scaling is inferred from the results for the range of magnitudes $5.2{\leq}M_W{\leq}7.1$. The results obtained are checked through stochastic simulations and the influence of the stress drop and kappa values on the ground motion levels is assessed. In addition, five ground motion models which were tested in other studies using recordings from Vrancea earthquakes are analyzed in order to evaluate their corresponding host stress drop and kappa. The results show generally a direct connection between the host kappa values and the host stress drop values. Moreover, all the ground motion models depict magnitude dependent host kappa and stress drop levels.

Effect of posture correction training in dental scaling using rapid upper limb assessment and 3D motion analysis (Rapid upper limb assessment와 3차원 동작 분석을 활용한 치석제거 자세교정 교육의 효과)

  • Yoon, Tae-Lim;Min, Ji-Hyun;Kim, Han-Na
    • Journal of Korean society of Dental Hygiene
    • /
    • v.18 no.3
    • /
    • pp.269-280
    • /
    • 2018
  • Objectives: The purpose of this study was to investigate the change in the posture of dental hygiene students and clinical dental hygienists when implementing dental scaling before and after posture correction training using the rapid upper limb assessment (RULA) method and 3D motion analysis. Methods: Thirty-two healthy volunteers performed dental scaling to remove artificial calculus on dental manikin. The movement and angle of the joints were verified by RULA and 3D motion analysis during the procedure. The subjects were also photographed for 1 minute during the procedure for 10 minutes while the calculus was removed. After the removal of the calculus, the subject and the instructor checked the video together. Posture correction training was conducted by the instructor so that the subject could perform the calculus removal operation in the correct posture. Artificial calculus of the adjacent teeth was then removed for the same period of time, and the change in posture was reviewed. Results: The total score of the posture change using RULA was $5.72{\pm}0.58$ before training and $4.31{\pm}0.10$ after training, showing a significant decrease after training (p<0.001), and upper arm, lower arm, wrist position, neck and waist position showed significant decrease after training. The three-dimensional motion analysis showed significant differences according to the criteria measured at all measurement sites except the left shoulder (p<0.05) Conclusions: It was confirmed through RULA and 3D motion analysis that postural correction training using calculus removal images was effective, and that correct postural education is essential to preventing musculoskeletal diseases caused by removal of calculus.

Improvement of Accessibility to Dental Care due to Expansion of National Health Insurance Coverage for Scaling in South Korea (치석제거 요양급여 확대 정책으로 인한 치과의료 접근성 향상)

  • Huh, Jisun;Nam, SooHyun;Lee, Bora;Hu, Kyung-Seok;Jung, Il-Young;Choi, Seong-Ho;Lee, Jue Yeon
    • The Journal of the Korean dental association
    • /
    • v.57 no.11
    • /
    • pp.644-653
    • /
    • 2019
  • Since 2013, adults aged over 20 can receive national health insurance scaling once a year in South Korea. In this study, we analyzed the usage status of national health insurance care service for periodontal disease in 2010-2018 by using Healthcare big data of the Health Insurance Review and Assessment Service. The increase rate of the dental care users was very high at 7.8 and 11.2% in 2013 and 2014, respectively. These are higher than the increase rate of all medical institution users, which is between -1.7 and 3.7%. In 2017, the rate of dental use was 44.4%, which has increased more than 10% compared to 2012. Percent receiver of national health insurance scaling was 19.5% in 2017. The 20s had the highest rate of 23.2%. The rate decreased with age. Based on these results, it can be evaluated that the expansion of national health insurance coverage for scaling improves accessibility to dental care. A more long-term assessment of the effect of periodic dental examination and scaling on reducing the prevalence of periodontal disease is needed. National health insurance coverage should be extended to oral hygiene education and supportive periodontal therapy in order to prevent periodontal disease.

  • PDF

The ergonomic analysis on dental hygienists' scaling treatment posture based on two dimensional motion (치과위생사 스켈링 시술자세의 2D에 의한 인간공학적 분석)

  • Jung, You-Sun
    • Journal of Korean society of Dental Hygiene
    • /
    • v.3 no.1
    • /
    • pp.73-87
    • /
    • 2003
  • This study was performed on 17 female dental hygienists to find an appropriate method to reduce the hygienists' body discomfort while scaling, and provide a foundation to educate them how 10 posture during the process. To assess the arm abduction, elbow flexion, neck flexion, trunk flexion and trunk lateral bending through Video 2D(two dimensional motion) analysis and assessing the risk through the Action level of RULA(rapid upper limb assessment) checklist, an ergonomic analysis method. Correlation analyses on the posture angles and on body discomfort were performed. ANOVA analysis on scaling treatment position and the scaling treatment region of patients was also performed. The results are as following. 1. 20 analysis while scaling, arm abduction was $40{\sim}79.9^{\circ}$, elbow flexion $20{\sim}110^{\circ}$, neck flexion $50{\sim}100^{\circ}$, trunk flexion $60{\sim}80^{\circ}$, and trunk lateral bending $5{\sim}19.9^{\circ}$. 2. The Action level of RULA was 2. 3 resulted from scores 4 and 5 of group A which includes upper arm, lower ann, wrist, and scores 2 and 4 of group B which includes neck, trunk, legs. It means that the scaling treatment posture causes a high incidence rate of musculoskeletal that an additional investigation and improvement should be followed without hesitation. 3. There were significant differences among the maxilla right, maxilla anterior, maxilla left, mandible left, mandible anterior, and mandible right of a patient of the right and left upper arm, lower arm, neck, trunk, group A, group B, final RULA score while scaling treatment. 4. There were significant differences among the time position of 8, 9, 10, 11, 12, 13 of the right and left upper arm, lower arm, neck, trunk, group A, group B, final RULA score while scaling treatment, 5. As for the body discomfort, neck, right shoulder, left shoulder, right back, right wrist etc. were listed on top. As a conclusion, performing the time position of 12 which shows low right and left final RULA scores is better than the time position of 8 and 10 which show high final RULA scores to reduce the body discomfort while scaling treatment.

  • PDF

Analysis of Cleavage Fracture Toughness of PCVN Specimens Based on a Scaling Model (PCVN 시편 파괴인성의 균열 깊이 영향에 대한 Scaling 모델 해석)

  • Park, Sang-Yun;Lee, Ho-Jin;Lee, Bong-Sang
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.33 no.4
    • /
    • pp.409-416
    • /
    • 2009
  • Standard procedures for a fracture toughness testing require very severe restrictions for the specimen geometry to eliminate a size effect on the measured properties. Therefore, the used standard fracture toughness data results in the integrity assessment being irrationally conservative. However, a realistic fracture in general structures, such as in nuclear power plants, may develop under the low constraint condition of a large scale yielding with a shallow surface crack. In this paper, cleavage fracture toughness tests have been made on side-grooved PCVN (precracked charpy V-notch) type specimens (10 by 10 by 55 mm) with various crack depths. The constraint effects on the crack depth ratios were evaluated quantitatively by the developed scaling method using the 3-D finite element method. After the fracture toughness correction from scaling model, the statistical size effects were also corrected according to the standard ASTM E 1921 procedure. The results were evaluated through a comparison with the $T_0$ of the standard CT specimen. The corrected $T_0$ for all of the PCVN specimens showed a good agreement to within $5.4^{\circ}C$ regardless of the crack depth, while the averaged PCVN $T_0$ was $13.4^{\circ}C$ higher than the real CT test results.

Constraint Loss Assessment of SA508 PCVN Specimen according to Crack depth (SA508 PCVN 시편의 균열깊이에 따른 구속력 손실 평가)

  • Park, Sang-Yun;Lee, Ho-Jin;Lee, Bong-Sang
    • Proceedings of the KSME Conference
    • /
    • 2008.11a
    • /
    • pp.161-166
    • /
    • 2008
  • In general structures, cleavage fracture may develop under the low constraint condition of larger scale yielding with a shallow surface crack. However, standard procedures for fracture toughness testing require very severe restrictions of specimen geometry. So the standard fracture toughness data makes the integrity assessment irrationally conservative. In this paper, cleavage fracture toughness tests have been made on side-grooved PCVN (precracked charpy V-notch) type specimens (10 by 10 by 55 mm) with varying crack depth, The constraint effects on the crack depth ratios are quantitatively evaluated by scaling model and Weibull stress method using 3-D finite clement method, After correction of constraint loss due to shallow crack depths, the statistical size effect are also corrected according to the standard ASTM E 1921 procedure, The results snowed a good agreement in the geometry correction regardless of the crack size, while some over-corrections were observed in the corrected values of $T_0$.

  • PDF

Factors associated with community scaling rate: Using community health survey data (지역사회 스케일링경험률에 영향을 미치는 요인: 지역사회건강조사 자료이용)

  • Kim, Ji-Min;Ha, Ju-Won;Kim, Ji-Soo;Jung, Yeon-Ho;Kim, Dong-Suk;Lee, Ga-Yeong;Jang, Young-Eun;Kim, Nam-Hee
    • Journal of Korean society of Dental Hygiene
    • /
    • v.15 no.6
    • /
    • pp.1053-1061
    • /
    • 2015
  • Objectives: The purpose of the study is to investigate the influencing factors of community scaling rate using community health survey data. Methods: The data were extracted from 2013 Community Health Survey, Ministry of education, Korea Dental Association, Statistics Korea, Health Insurance Review and Assessment Service, and Ministry of the Interior. The resource factors of independent variables were analysed by Geographical Information System(GIS) using Map Wizard for Excel 17.0. The data were analyzed by descriptive analysis, pearson correlation and multiple linear regression analysis(p<0.05). Results: Seocho-gu in Seoul had the highest annual scaling rate(55.5%) and Goheung-gun had the lowest rate(11%) showing 44.5 percent gap. The influencing factors of scaling included the number of dental hygienists(r=0.316), dentists(r=0.332), dental hospitals(r=0.470), high school graduation rate(r=0.757) and equivalence scales household income(r=0.764)(p<0.05). Multiple linear regression analysis showed that community scaling rate was closely associated with community education level and monthly income(p<0.05). Conclusions: Community scaling rate was closely related to the community education and income level. It is necessary to provide the equal distribution of the oral health service to the community society.

The assessment of sound quality of loudspeaker system by using factor analysis and muliti-dimensional scaling (인자분석과 다효원척를 이용한 스피이커의 음질평가)

  • 황영수;김영일;차일환
    • The Journal of the Acoustical Society of Korea
    • /
    • v.3 no.1
    • /
    • pp.16-24
    • /
    • 1984
  • The objective data and subjective data correlated in order to rate sound quality of loudspeaker system and these data were analyzed by the Factor Analysis and Multi-Dimensioinal Scaling. The dimensions yielded Factor Analysis were interpreted as "Contrast", "Metallic", "Rich", "Present" and their relation to physical variables were explored by studying the positions of loudspeaker systems in the respective dimension. When the subjective similarity degree of loudspeaker systems was compared with the objective similarity degree of loudspeaker systems by Multi-Dimensional Scaling, the similarity degree of sound pressure response in the listening room closely coincided with the subjective similarity degree regardless of sound source. This result implies the necessity of measurements taken not only in an anechoic room but also in a listening room in order to rate sound quality of loudspeaker systems.

  • PDF

Scaling predictions in seawater reverse osmosis desalination

  • Hchaichi, Houda;Siwar, Saanoun;Elfil, Hamza;Hannachi, Ahmed
    • Membrane and Water Treatment
    • /
    • v.5 no.3
    • /
    • pp.221-233
    • /
    • 2014
  • Simulations were conducted to predict supersaturation along Reverse Osmosis (RO) modules for seawater desalination. The modeling approach is based on the use of conservation principles and chemical equilibria equations along RO modules. Full Pitzer ion interactive forces model for concentrated solutions was implement to calculate activity coefficients. An average rejection rate for all ionic species was considered. Supersaturation has been used to assess scaling. Supersaturations with respect to all calcium carbonate forms and calcium sulfate were calculated up to 50% recovery rate in seawater RO desalination. The results for four different seawater qualities are shown. The predictions were in a good agreement with the experimental results.

A Study on the Comparative Analysis of UHD Video Quality from Audience Viewpoint (시청자 관점에서의 UHD 콘텐츠 화질 비교 분석에 관한 연구)

  • Cho, Yong Suk;Min, Dong Chul;Choi, Seong Jhin
    • Journal of Broadcast Engineering
    • /
    • v.26 no.5
    • /
    • pp.621-642
    • /
    • 2021
  • In this paper, the subjective video quality assessment of the content quality was to examine by the assessors about the three content quality of HD, Up-scaling UHD, 4K UHD Native that is currently broadcasted. The comparative assessment was conducted using three types of TV sets, 55, 65, 75 inches, at a distance of 2.5 meters which is the distance of watching TV in general households. Among the participants who took part in the video quality evaluating experiment and the questionnaire survey, the answering data of the final 169 persons were adopted after removing the data of 4 persons who answered inadequately in the evaluation of the video quality. The effects of gender, preference of program genre, size of TV sets were analyzed statistically using SPSS 25.0 analysis package. In addition to these, the objective video quality assessment through the measuring instrument was performed, and compared with the results of subjective video quality assessment.