• 한국지진공학회논문집
• /
• 제11권5호
• /
• pp.33-47
• /
• 2007

실무에서 지진해석법으로 널리 쓰이는 방법은 등가정적해석법과 응답스펙트럼해석법이다. 이 중 등가정적해석법에 의한 밑면전단력은 구조물의 주축을 해석좌표축에 어떻게 배치하는가와 상관없이 일관된 값을 나타낸다. 그러나 응답스펙트럼해석은 해석좌표 축에 구조물의 주축을 다르게 배치하여 해석을 수행하면 밑면전단력이 각기 다르게 발생한다. 이는 엔지니어가 구조물을 설계함에 있어 구조물의 주축을 해석좌표축에 어떻게 설정했는지에 따라 설계부재력이 모두 달라질 수 있음을 뜻한다. 또한 응답스펙트럼해석은 지진을 가한 방향의 직각방향에서 적지 않은 응답이 발생하는 경우가 생긴다. 한방향 해석에 대한 X와 Y축을 따라 분리되는 이러한 양방향 응답은 보정계수 산정시 쓰이는 밑면전단력을 작게 만들며 이는 결과적으로 보정계수를 크게하여 과다설계의 우려가 생긴다. 내진설계시 발생하는 이러한 문제점을 해결하기 위하여 본 논문에서는 수평의 강성 차이에 따라 구조물을 크게 세 가지(양방향 대칭 구조물, 한방향 비대칭구조물, 양방향 비대칭구조물)로 분류하여 각각의 경우에 대하여 간단한 모델을 선정하고 구조물의 주축을 회전시켜가면서 지진해석을 수행하였다. 각 경우의 예제구조물이 가지는 동적특성과 설계부재력을 살펴보았다. 현재 실무에서 적용되는 보정계수 산정법에 의한 설계부재력과 앞선 문제들을 해결하고자 본 논문에서 제안하는 새로운 보정계수 산정법에 의한 설계부재력을 비교하여 제안하는 보정계수 산정법의 효율성을 검토하였다. 그 결과로 새로 제안된 보정계수 산정법에 의하여 설계부재력을 산정하는 것이 내진설계시 엔지니어들이 겪을 수 있는 혼란을 덜어주며 경제적인 부재설계가 가능함을 알 수 있었다.

• 공업화학
• /
• 제28권1호
• /
• pp.17-22
• /
• 2017

본 총설에서는 마이크론 사이즈 이하 제품에 대한 최적화적인 화학공정의 스케일업을 위한 전략을 소개한다. 최적화된 화학공정의 스케일업을 위해 구해야 할 스케일업 인자의 정의와 이를 도출하는 방법을 소개하였으며, 특히 무반응 시스템, 유반응 시스템으로 분류하여 각각에 대해 서로 다른 스케일업 인자를 찾은 기준을 소개하고, 예시를 들어 논의하였다. 본지에서 소개된 스케일업 인자를 구하는 방법론이 마이크론 사이즈 이하 제품에 대한 화학공정을 스케일업하고자 하는 엔지니어들에게 초기 지침서가 될 것으로 기대된다.

• 보건교육건강증진학회지
• /
• 제31권5호
• /
• pp.29-43
• /
• 2014

Objectives: This study was to develop a reliable and valid instrument measuring the reproductive health promoting behavior of undergraduates. Methods: The initial questionnaires were made of 106 items from four domains through literature review. All questionnaire items were revised by an expert group and a pilot test. Data were collected using the revised initial questionnaire of men's 58 items and female's 64 items from 634 male and 685 female undergraduate students. The collected questionnaires were analyzed by factor analysis using varimax rotation to evaluate the construct validity. Results: According to the gender, two measurement were invented and analysed separately. Four common factors consisting of 'safe sex', 'sexual responsibility', 'genital health management' and 'STD prevention' were discovered in both groups. The 'genital hygiene' factor was added as a female factor. Male students' scale was made up 4 factors 16 items and female students' scale was made up 5 factors 18 items. Cronbach's alpha for male scale was estimated to be .892 and female scale to be .882. Conclusions: This scale will make it possible to measure the level of reproductive health among Korean university students. This scale may be useful for developing effective methods of education as well as policy programs for improving the reproductive health of Korean university students.

• 소성∙가공
• /
• 제14권5호
• /
• pp.477-481
• /
• 2005

Wafer scale micro mirror array with high surface quality for small form factor (SFF) optical pick-up was fabricated by micro UV-molding. To replicate micro mirror array for SFF optical pick-up, a high- precision mold was fabricated using micro-machining technology. Wafer scale micro mirror array was UV-molded using the mold and then the process was optimized experimentally. The surface flatness and roughness of UV-molded micro mirror array were measured by white light scanning interferomety system and analyzed the transcribing characteristics. Finally, the measured flatness of UV-molded micro mirror away for SFF optical pick-up, which was fabricated in the optimum processing condition, was less than 70nm.

• KIEAE Journal
• /
• 제6권4호
• /
• pp.25-32
• /
• 2006

Mock-up model can be applied to measure accurate performance data but difficult to apply the variables in experiment. There can be a slight experiment errors in Scale model, but various parameters can be applied for a objective experiment. This paper aims to compare the daylighting performance in 1, 1/5, 1/10 scale model of offices and analyze the experiment errors to certificate the influence of model experiment. To analyse daylighting performance, a comparison of a Mock-up model, sized $12.0m(w){\times}7.2m(l){\times}3.7m(h)$, designed for experimentation of daylighting systems and its 1:5, 1:10 scale model. It has an identical configuration of reference room and the test room. For the test room, the lightshelf system was designed as Micro-4 reflective material. To assess work plane illuminance and light factor, photometric sensors of each room were installed at work-plane(6 points) and exterior horizontal illuminance (1 point). And luminance of window, rare of the room was measured under clear sky. It is to be monitored by Agilent data logger, photometric sensor Li-cor and the Radiant Imaging ProMetric 1400. Comparisons with a light factor, increase-decrease ratio and luminance are discussed.

• Journal of Microbiology and Biotechnology
• /
• 제9권6호
• /
• pp.773-777
• /
• 1999

Scale-up experiments for hydrolysis of beef tallow, fat, and palm kernel with lipase derived from Candida cylindracea were carried out in 1-1, 100-1, and 10,000-1 reactors. The optimum agitation speed for the hydrolysis of the 1-1 reactor was investigated and found to be 350rpm, and this was a basis for the scale-up of agitation speed. The hydrolysis system in this work was the oil-water system in which the hydrolysis seems to process a heterogeneous reaction. An emulsion condition was the most important factor for determining the reaction rate of hydrolysis. Therefore, the scale-up of agitation speed was performed by using the power n = 1/3 in an equation of the rules of thumb method. The geometrical similarity for scaling-up turned out to be unsatisfactory in this study. Thus, the working volume per one agitator was used for the scale-up. In the case of scale-up from a 1-1 reactor to a 100-1 reactor, the hydrolysis of palm kernel was very much scaled-up by initiating the rules of thumb method. However, the hydrolysis of fat and beef tallow in a 100-1 reactor was a little higher than that of the 1-1 reactor because of the difference of geometrical similarity. The scale-up of hydrolysis from the 100-1 reactor to the 10,000-1 reactor was improved compared to that of the 1-1 to 100-1 reactor. The present results indicated that the scale-up of hydrolysis in the oil-water system by the rules of thumb method was more satisfactory under the condition of geometrical similarity. Even in the case where geometrical similarity was not satisfactory, the working volume per one agitator could be used for the scale-up of a heterogeneous enzyme reaction.

• 한국의류산업학회지
• /
• 제7권5호
• /
• pp.527-534
• /
• 2005

The purpose of this research is to study face images according to color of make-up was made by computer graphic simulation. The various facial images can be helpful for choosing suitable make-up color planning. In order to find out the differences of face images by make-up color, three different foundations and seven eye-shadows, six lips were applied on the round face model. Make-up Image Scale was used the scale of seven point modified the S-D method. Data were analyzed by Varimax perpendicular rotation method, Duncan's Multiple Range Test, Three-way ANOVA. As the result of make-up image perception analysis, a factor structure was divided into mildness, modernness, elegance, unique. The factor of mildness, modernness, unique affected on the foundation color. Foundation color was found out to be influential variable to distinguish color perception abilities. Also, the foundation, eye-shadow, lip color were influenced interactively on the perception of elegance factor. Pink color was important color, influenced on the mildness factor. Gray and purple color were influenced on the modernness factor. Mildness factor was perceived as the most bright foundation but unique factor was perceived as the most dark foundation. Then, the foundation, eye-shadow, lip color were influenced interactively on the perception of facial images. The results can be effectively applied to today's marketing and color design management which is focused on the product's emotional image in customer's mind.

• Journal of the Korean Data and Information Science Society
• /
• 제25권4호
• /
• pp.961-970
• /
• 2014

This article deals with the problem of testing the equality of the scale parameters of several inverted exponential distributions. We propose Bayesian hypothesis testing procedures for the equality of the scale parameters under the noninformative prior. The noninformative prior is usually improper which yields a calibration problem that makes the Bayes factor to be defined up to a multiplicative constant. So we propose the default Bayesian hypothesis testing procedures based on the fractional Bayes factor and the intrinsic Bayes factors under the reference priors. Simulation study and an example are provided.

• Journal of the Korean Data and Information Science Society
• /
• 제23권6호
• /
• pp.1299-1308
• /
• 2012

This article deals with the problem of testing the equality of the scale parameters in nonregular Pareto distributions.We propose Bayesian hypothesis testing procedures for the equality of the scale parameters under the noninformative prior. The noninformative prior is usually improper which yields a calibration problem that makes the Bayes factor to be de ned up to a multiplicative constant. So we propose the default Bayesia hypothesis testing procedures based on the fractional Bayes factor and the intrinsic Bayes factors under the reference priors. Simulation study and a real data example are provided.

• Journal of the Korean Data and Information Science Society
• /
• 제25권2호
• /
• pp.465-472
• /
• 2014

This article deals with the problem of testing the equality of the scale parameters in the half logistic distributions. We propose Bayesian hypothesis testing procedures for the equality of the scale parameters under the noninformative priors. The noninformative prior is usually improper which yields a calibration problem that makes the Bayes factor to be dened up to a multiplicative constant. Thus we propose the default Bayesian hypothesis testing procedures based on the fractional Bayes factor and the intrinsic Bayes factors under the reference priors. Simulation study and an example are provided.