• 한국전기전자재료학회논문지
• /
• 제18권3호
• /
• pp.206-211
• /
• 2005

The device makers want to make higher density chips on the wafer through scale-down. The change of WSix/poly-Si gate film thickness is one of the key issues under 100 nm device structure. As a new device etching process is applied, end point detection(EPD) time delay was occurred in DPS+ poly chamber of Applied Materials. This is a barrier of device shrink because EPD time delay made physical damage on the surface of gate oxide. To investigate the EPD time delay, the experimental test combined with OES(Optical Emission Spectroscopy) and SEM(Scanning Electron Microscopy) was performed using patterned wafers. As a result, a EPD delay time is reduced by a new chamber seasoning and a new wavelength line through plasma scan. Applying a new wavelength of 252 nm makes it successful to call corrected EPD in WSix/poly-Si stack-down gate etching in the DPS+ poly chamber for the current and next generation devices.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.459-462
• /
• 2006

The diffuse attenuation coefficient for down-welling irradiance ($K_d$) is an important parameter for ocean studies including remote sensing applications. For the vast ocean, ocean color remote sensing is the only possible means to get the fine-scale measurements of $K_d$. To develop a technique of estimating $K_d$ from remotely sensed data, the following underwater optical parameters (absorption coefficient (a), attenuation coefficient (c), scattering coefficient (b), diffuse attenuation coefficient ($K_d$), etc.) have been studied. For this research we conducted the field campaign around the Yellow Sea at $8{\sim}9$ June, 2006. We obtained a set of underwater optical parameter data: down-welling irradiance ($E_d$), up-welling irradiance ($E_u$) and up-welling radiance ($L_u$) using TriOS optical sensors and a, c coefficient using Spectral Absorption and Attenuation Meter (AC-S). We then derived $K_d$ values from $E_d$ for each depth.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.33.2-33.2
• /
• 2011

The 'NREL Phase VI' model with a 10.06m diameter was tested in the NASA Ames tunnel to make a reference data of the computational models. The test was conducted at the one rotational speed, blade tip speed 38m/s and the Reynolds number of the sectional airfoils in that test was around 1E6. The 1/5 scale down model of the 'NREL Phase VI' model was used in this paper to study the power characteristics in low Reynolds number region, 0.1E6 ~ 0.4E6 which is achievable range for the conventional wind tunnel facilities. The torque generated by the blade was directly measured by using the torque sensor installed in the rotating axis for a given wind speed and rotational speed. The power characteristics below the stall condition, lambda > 4, was presented in this paper. The power coefficient is very low in the condition below the Re. 0.2E6 and rapidly increases as the Re. increases. And it still increases but the variation is not so big in the condition above the Re. 0.3E6. This results shows that to study the performance of the wind turbine blade by using the scaled down model, the Re. should be larger than the 0.3E6.

• Steel and Composite Structures
• /
• 제1권2호
• /
• pp.187-200
• /
• 2001

Most of the portal frames are designed these days by the application of plastic analysis, with the normal assumption being made that the column bases are pinned. However, the couple produced by the compression action of the inner column flange and the tension in the holding down bolts will inevitably generate some moment resistance and rotational stiffness. Full-scale portal frame tests conducted during a previous research program had suggested that this moment can be as much as 20% of the moment of resistance of the column. The size of this moment of resistance is particularly important for the design of the tensile capacity of the holding down bolts and also the bearing resistance of the foundation. The present research program is aiming at defining this moment of resistance in simple design terms so that it could be included in the design of the frame. The investigation also included the study of the semi-rigid behaviour of the column base/foundation, which, to a certain extent, affects the overall loading capacity and stiffness of the portal frames. A series of column bases with various details were tested and were used to calibrate a finite element model which is able to simulate the action of the holding down bolts, the effect of the concrete foundation and the deformation of the base plate.

• 대한기계학회논문집B
• /
• 제28권1호
• /
• pp.24-30
• /
• 2004

Analysis model for the two-phase catalytic reactor is presented. With the progress in development of micro thermofluidic devices, needs fur understanding of the phenomena in two phase reaction in cm scale has been arisen. To investigate thermal and reactive performance of down scaled two phase reactor simple analysis model that is a kind of lumped flow model is proposed. Analysis model presented is based on the experiment on mm scale model reactor. Target experiment is catalytic decomposition of 70wt％ hydrogen peroxide with existence of perovskite L $a_{0.8}$S $r_{0.2}$Co $O_3$ catalyst. It is composed of balance equations of mass and energy. Each phase is considered to be a species fur the simplicity. Axial diffusion and transversal distribution of properties are neglected. Two phase catalytic reaction is modeled as successive gasification of liquid lump around catalyst and reaction in gas phase. Heat transfer is modeled by model function ofNu number. Modeled Nu is expressed as Nu=N $u_{0}$ (1＋ $a_1$( $a_2$ $T^{-}$ $a_3$)exp( $a_4$ $T^{-1}$)exp( $a_{5}$ z). Transfer coefficients are determined by the comparison of experimental results. With the model, heat transfer characteristics are investigated. Also by the mass transfer coefficient, characteristics in mass transfer is investigated. With the result basic understanding on design and analysis of mm scale two-phase reactive device is obtained. Also it can be further applied to micro scale reactive device fabricated by micromachining.ing..

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2003년도 춘계학술논문발표회논문집
• /
• pp.125-134
• /
• 2003

• 한국전자파학회논문지
• /
• 제14권6호
• /
• pp.616-624
• /
• 2003

상수도 누수로 인한 우리나라 수자원의 고갈 때문에 효율적으로 누수를 탐지할 수 있는 방법이 시급하다. 본 논문에서는 지하탐사 레이더(GPR) 기법을 이용하여 누수지점을 탐사하였다. 메탄올이 채워진 아크릴 상자로 누수가 일어난 영역을 구현한 후, 본 실험실에 구축된 GPR 시스템을 사용하여 scale-down 실험을 수행하였다. 본 GPR실험의 타당성은 측정결과가 동일한 상황에서의 FDTD 계산 결과와 거의 일치함을 보임으로써 확인하였다. 누수 분포에 따른 B-scan 영상들을 제시함으로써 GPR 시스템의 누수탐지 가능성을 살펴보았다.

• Computers and Concrete
• /
• 제21권4호
• /
• pp.385-397
• /
• 2018

This study is focused on the investigation for similitude the requirements between prototype and scaled models to determine the structural behavior of concrete load bearing systems. The scaling concept has been utilized in many engineering branches, has been assisted to engineers and scientists for obtain the behavior of the prototype by using scaled model. The scaling can be done for two purposes, either scaling up or scaling down depending upon the application. Because, scaled down models are the experimentation on scaled models is cheaper than huge structures. These models also provide facilities for experimental work. Similarity relationships between systems are created either by field equations of the system or by dimensional analysis. Within this study, similarity relationships were obtained by both methods. The similarity relations obtained are applied to different load bearing systems and it is determined that the similarity relation is a general expression. In this study, as an example, column, frame, cantilever beam and simple beam are chosen and 1/2, 1/5 and 1/10 scales are applied. The results are compared with the analytical results which are obtained by creating of the finite element models with SAP2000 software of different scaled load bearing systems. The analysis results of all systems are examined and it is determined that the scale factors are constant depending on the scale types for different load bearing systems.

• 한국전자통신학회논문지
• /
• 제16권3호
• /
• pp.451-456
• /
• 2021

반도체 메모리 소자의 커패시터에서 셀 커패시턴스의 향상과 scale down을 위해 유전막으로써 적층형 ONO 구조가 도입되었고 이들의 박막화가 지속적으로 시도되고 있으나 공정 처리 과정에서 많은 문제들이 대두되고 있다. 본 연구에서는 L/L LPCVD를 사용하여 약 10Å의 자연산화막 성장을 억제함으로써 3fF/cell의 정전 용량을 확보할 수 있었다. 또한 유전막의 박막화에 따른 질화막의 이상산화에 미치는 영향을 고찰함으로써 내산화성을 확보할 수 있는 유전막 형성의 안정적인 공정 관리 방법을 제안하였다.

• Journal of Acupuncture Research
• /
• 제36권3호
• /
• pp.161-165
• /
• 2019

This study was conducted to investigate whether treatment with Korean medicine might help to improve symptoms of patients diagnosed with Ramsay Hunt Syndrome. A patient diagnosed with Ramsay Hunt Syndrome was hospitalized for 15 days from October 4, 2018 to October 18, 2018 and treated using Korean medicine (Sinbaro3 pharmacopuncture, acupuncture, electroacupuncture, and herbal medicine). Therapeutic effects were evaluated using the Numerical Rating Scale (NRS), House-Brackmann grade, Yanagihara's score survey, and Digital Infrared Thermographic Imaging (DITI). After treatment, the Numerical Rating Scale score (6 at admission down to 2 points at discharge), House-Brackmann grade (Grade V down to Grade II), Yanagihara's score (6.0 up to 22.0), and Digital Infrared Thermographic Imaging showed improvement from admission to discharge. Treatment with traditional Korean medicine, may help improve symptoms of Ramsay Hunt Syndrome such as facial nerve paralysis, neuralgia after paraplegia, hearing difficulties, and dizziness.