• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.350-357
• /
• 2002

The scale effect should be considered to determine the bearing capacity and settlement of footings from Plate-Load Test, because of the size difference between a footing and a loading plate. To analyze characteristics of bearing capacity and settlement according to the difference of loading plate sizes, model tests were peformed with four different sizes of square plate, which is B=10, 15, 20 and 25cm respectively, on five different kinds of subsoil, which is pure sand(100:0), sand-clay mixed soil(75:25, 50:50, 25:75), and pure clay(0:100). Based on the analyzed results, this paper also proposed a method of bearing capacity and settlement determination, where scale effect is considered depending on the mixing ratio of sand and clay. Applying the formular proposed in this research to field problems, it is expected that evaluation of bearing capacity and settlement of footings can be more reliable and more economic construction can be achieved.

• 한국지반환경공학회 논문집
• /
• 제14권12호
• /
• pp.61-69
• /
• 2013

도로 및 철도의 터널 공사가 증가함에 따라 공사 시에 다양한 지반조건에서 터널 공사 단계를 진행하고 있다. 특히, 석회암 지역에서 터널 공사를 진행하게 되는 경우에는 대부분의 공동이 터널 계획구간에 존재하고 있는 실정이다. 하나 또는 그 이상의 공동은 터널의 안정성을 저하하는 것으로 예상된다. 따라서, 본 연구에서는 터널과 공동과의 상호 영향을 알아보고자 실내 모형 축소실험과 수치해석을 시행하였다. 실내모형실험은 터널과 공동 간의 거리에 따른 모형지반의 파괴하중을 확인하였고, 공동의 형상에 따른 파괴하중을 확인하였다. 실내모형실험결과 파괴하중은 공동과 터널 간의 거리가 0.5D 이내로 감소함에 따라서 파괴하중 역시 감소하는 것으로 나타났다. 수치해석은 모형실험의 검증을 위해 시행하였으며, 실내모형실험과 동일하게 터널과 공동 간의 거리가 0.5D 이내로 근접하는 경우 터널의 안정성이 저하되는 것으로 확인되었다.

• Wind and Structures
• /
• 제16권2호
• /
• pp.137-156
• /
• 2013

A wind tunnel test of a scaled-down model and field measurement were effective methods for elucidating the aerodynamic behavior of a chimney under a wind load. Therefore, the relationship between the results of the wind tunnel test and the field measurement had to be determined. Accordingly, the set-up and testing method in the wind tunnel had to be modified from the field measurement to simulate the real behavior of a chimney under the wind flow with a larger Reynolds number. It enabled the results of the wind tunnel tests to be correlated with the field measurement. The model surface roughness and different turbulence intensity flows were added to the test. The simulated results of the wind tunnel test agreed with the full-scale measurements in the mean surface pressure distribution behavior.

• 터널과지하공간
• /
• 제30권1호
• /
• pp.87-97
• /
• 2020

암석의 파괴인성은 발파, 굴착 등으로 인한 균열의 개시와 전파를 나타낼 수 있는 상수이다. 터널의 거동, 석회석 광산의 안정성 평가 등에 축소모형실험이 다양하게 적용되고 있다. 축소모형을 통해 발파로 인한 손상영역평가도 이뤄지고 있는데, 파괴 관련 인자에 대한 축소율 적용은 이뤄지지 않고 있다. 본 연구에서는 DCT(diametral compression test) 값과 유한요소법인 ATENA2D 수치해석 결과를 비교하여 암석의 파괴인성에 축소율을 적용할 수 있는지 확인하였다. 암석의 파괴인성에 이론적으로 계산된 축소율을 적용한 값과 DCT 시험결과 및 수치해석 결과가 각각 0.21~0.46, 0.40, 0.99MPa ${\sqrt{m}}$ 로 편차가 있으므로 암석의 파괴인성에 축소율을 적용 시에는 이 세 가지 값을 고려하여 적합한 축소율을 도출해야 하고, 축소모형 제작 시 축소율 적용 대상이 되는 길이, 시간, 질량과 함께 이로부터 산출되는 일축압축강도, 밀도 등의 주요 설계인자들의 축소율이 적용된 값을 함께 검토해야 할 것이다.

• 지질공학
• /
• 제17권3호
• /
• pp.435-443
• /
• 2007

본 연구에서는 풍화대에 분포하고 있는 핵석지반에 대한 지질공학적 조사와 실내모형실험을 통하여 핵석지반의 공학적 물성을 산정하였다. 핵석이 노출된 세 곳의 산사면에 대한 조사창 조사와 시추공 코어 관찰로 핵석의 분포도와 기하학적 모양을 분석하였다. 현장 핵석분포 및 크기에 대한 조사 자료와 모형실험용 공시체 시편의 크기를 바탕으로 산정된 축소율을 고려하여 5mm이하-평균 2mm의 분쇄-연마된 핵석시료를 실내핵석 실험용으로 사용하였다. 핵석 체적함유비를 0%, 10%, 20%로 달리하면서 토양 직접전단시험 및 석고모형실험을 실시하였고, 이를 통하여 핵석지반의 특성을 구하고자 하였다. 핵석함유 토양의 직접전단실험에서는 핵석 함유량의 증가로 인하여 전단강도가 증가하는 경향을 보여주었다. 핵석함유비가 20%일 경우는 핵석 입자의 맞물림에 의한 점착력의 증가가 마찰각의 변화보다 더욱 전단강도의 상승을 유발시키는 요소로 작용하였다. 핵석 함유비를 달리한 석고모형실험에서는 핵석이 많아질수록 모형시료의 강도 및 탄성계수가 증가하는 경향을 보여주었다. 석고모형실험에서 얻어진 핵석 함유량에 따른 모형의 물성변화률을 현장에서 측정한 풍화대의 물성과 비교하여, 현장에서 핵석함유에 따른 물성을 예측한 결과, 핵석 함유가 0%에서 10%로 증가하면 15%의 일축압축강도 증가를, 핵석 함유가 20%로 증가되면 30%의 일축압축강도 증가를 유발하는 것으로 예측이 되었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.337-342
• /
• 2011

A roller rig has been widely used in the study about dynamic stability and railway safety. However, the cost for constructing the roller rig and the difficulty in adjusting the design parameters for vehicle systems lead to the development of a small scale simulator which is cheaper than the large scale test systems and easy to control the parameters affecting dynamic characteristics of the railway vehicle. For the operation of the small scale test system called a small scale simulator, it is required to investigate the performance and characteristics of the system. This could be achieved by a comparative study between an analysis and an experiment. This paper presented the analytical model which could be used for verifying of the test results and understanding of the physical behavior of the dynamic system comprising the small scale bogie and the simulator.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.585-594
• /
• 2009

In this present study, to performed the model test and estimated the behavior characteristics of twin tunnel in accordance with the variation of the whole failure parameters which is the strength of the ground, distance of tunnel, angle of the joint, installation of tension bolts and the blasting load. To carry out the numerical analysis for verification of model test results and analyze the sensitivity on failure parameters using model test and numerical analysis results. Based on sensitivity analysis results, to propose the most habitually failure parameters in tunnel scale model test.

• KIEAE Journal
• /
• 제6권4호
• /
• pp.25-32
• /
• 2006

Mock-up model can be applied to measure accurate performance data but difficult to apply the variables in experiment. There can be a slight experiment errors in Scale model, but various parameters can be applied for a objective experiment. This paper aims to compare the daylighting performance in 1, 1/5, 1/10 scale model of offices and analyze the experiment errors to certificate the influence of model experiment. To analyse daylighting performance, a comparison of a Mock-up model, sized $12.0m(w){\times}7.2m(l){\times}3.7m(h)$, designed for experimentation of daylighting systems and its 1:5, 1:10 scale model. It has an identical configuration of reference room and the test room. For the test room, the lightshelf system was designed as Micro-4 reflective material. To assess work plane illuminance and light factor, photometric sensors of each room were installed at work-plane(6 points) and exterior horizontal illuminance (1 point). And luminance of window, rare of the room was measured under clear sky. It is to be monitored by Agilent data logger, photometric sensor Li-cor and the Radiant Imaging ProMetric 1400. Comparisons with a light factor, increase-decrease ratio and luminance are discussed.

• International Journal of Computer Science & Network Security
• /
• 제21권5호
• /
• pp.211-216
• /
• 2021

This study intended to test the structure of the latent factor of a subjective happiness scale and the stability of invariance across groups of students' classifications (gender and students' status). In the large, non-clinical sample (619), students completed the subjective happiness scale. The (CFA) confirmatory factor analysis was used to investigate the factor-structure of the measure, and multiple-group confirmatory factor analysis (MGCFA) model was used to test the stability of invariance across groups of students classifications. The findings of the CFA indicated support for the original one-factor model. Additional analyses of the MGCFA method support the measurement (configural, metric and strong) invariant and practical invariant components of this model. There was an invariant across gender. There was partially invariant across groups of students' statuses. The scale exists in both groups to assess the same concepts of (single and married), excluding Items 3 and 4. Given that this study is the first investigation for the structure of the subjective happiness scale.

• International Journal of Computer Science & Network Security
• /
• 제21권12호
• /
• pp.149-156
• /
• 2021

This study intended to test the structure of the latent factor of an effectiveness scale and the stability of invariance across groups of students' classifications (gender and levels of education). In the large, non-clinical sample (850), students completed the effectiveness scale. The (CFA) confirmatory factor analysis was used to investigate the factor-structure of the measure, and multiple-group confirmatory factor analysis (MGCFA) model was used to test the stability of invariance across groups of students' classifications. The findings of the CFA indicated support for the original four-factor model. Additional analyses of the MGCFA method support the measurement (configural, metric and strong) invariant and practical invariant components of this model. There was an invariant across gender. There was partially invariant across groups of levels of education. The scale exists in groups of levels of education assess the same concepts of, excluding Items 15 and 10. Given that this study is the first investigation for the structure of the effectiveness scale.