• Elastomers and Composites
• /
• v.36 no.1
• /
• pp.44-51
• /
• 2001

To see the effect of chemical surface modification, the carbon black surfaces were treated with three types of chemicals (KOH, $H_3PO_4$, and benzene). Vulcanization and mechanical properties of a styrene-butadiene rubber (SBR) were investigated depending on the chemical treatments. The surface free energy increased considerably with the treatments by both the acid (HCB) and base (KCB), but only a slight increase was observed for benzene treatment(BCB). The BCB showed the highest level of the London dispersive component. The vulcanization reaction was found to be faster in the order of KCB-SBR> BCB-SBR> VCB-SBR(virgin) > HCB-SBR. The difference in minimum and maximum torque of rheocurve, representing the degree of crosslinking, was found to be higher for the BCB-SBR compared to those of VCB-SBR, KCB-SBR, and HCB-SBR. The BCB-SBR and KCB-SBR showed the improved tensile and dynamic mechanical properties. A linear relationship was found to exist between the London dispersive component of surface free energy and mechanical properties.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.2
• /
• pp.148-154
• /
• 2009

In audio coding, SBR technology synthesizes the high-bands using patched time-frequency information from low-bands and the correction parameters, Since SBR transmits only correction parameters for high-bands, it provides a low-rate coding of high-bands, and is used as a core module of MPEG-4 HE-AAC, SBR was originally designed for audio signal and its performance for speech signal tends to decrease, and the major reason is an excessive noise floor in high-bands which is caused by incorrect tonality computation, In this paper, a new method to determine noise floor level in an adaptive fashion according to the speech characteristics is proposed in order to solve the problem of SBR for speech signal, The proposed method maintains the compatibility with the standard SBR, and the subjective performance evaluation shows that the proposed method improves the SBR performance especially for male speech signal compared with the standard SBR.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.7
• /
• pp.719-725
• /
• 2005

Anaerobic fill time and feeding pattern in SBR operation were investigated to find way of minimizing poor nitrogen removal efficiency in BNR process without external carbon addition. The three types of the modified SBR operations that were CO-SBR, IA-SBR, and SF-SBR were tested by lab-scale and pilot-scale SBR processes($2\;m^3/day$). In addition, practical equation for biological nitrogen removal was suggested and the equation considered the effect of ratio of fill volume over whole SBR volume and the ratio of step-feed in SBR. The denitrification efficiency of the SF-SBR was best among the three SBRs and followed by IA-SBR, and CO-SBR. The efficiency was 95%, 61%, and 19%, respectively. Looking at the change of sludge floc density by the length of anaerobic fill time, the density of sludge floc at 1 hour and 2 hours of anaerobic fill time were greater than 3 hours of one. The floc size distributions were $100{\sim}300\;{\mu}m$ and $200{\sim}400\;{\mu}m$ with respect to anaerobic fill time 2 hours and 3 hours, respectively.

• Elastomers and Composites
• /
• v.57 no.4
• /
• pp.188-196
• /
• 2022

Styrene-butadiene rubber(SBR) is a copolymer of styrene and butadiene. It is composed of 1,2-unit, 1,4-unit, and styrene, and its properties are dependent on its microstructure. In general, rubber composites contain a single rubber or a blended rubber. Similarly, SBR is used by mixing with natural rubber(NR) and butadiene rubber(BR). The composition of a rubber article affects its physical and chemical properties. Herein, an analytical method for determining the microstructure of SBR using via pyrolysis is introduced. Pyrolysis-gas chromatography/mass spectrometry is widely used to analyze the microstructure of polymeric materials. The microstructure of SBR can be determined by analyzing the principal pyrolysis products formed from SBR, such as 4-vinylcyclohexene, styrene, 2-phenylpropene, 3-phenylcyclopentene, and 4-phenylcyclohexene. An analytical method for determining the composition of SBR/NR, SBR/BR, and SBR/NR/BR blends via pyrolysis is introduced. The composition of blended rubber can be determined by analyzing the principal pyrolysis products formed from each rubber component.

• Korean Journal of Food Science and Technology
• /
• v.44 no.6
• /
• pp.722-727
• /
• 2012

In order to improve the physical properties of brown rice by hydration and cooking, the amount of water absorption, hardness, reducing sugar, and minerals were measured for rice (NR), brown rice (NBR), and scratched brown rice (SBR). The amounts of water absorption were present in the order of NBR<0.07 SBR<0.20 SBR=NR after 210 min. The moisture contents of gelatinization rice were significantly different by degree of milling and scratch. The hardness of gelatinization rice were present in the order of NR<0.20 SBR<0.07 SBR

• Journal of Korean Society on Water Environment
• /
• v.24 no.3
• /
• pp.340-344
• /
• 2008

Electro-flotation (EF) was applied to a sequencing batch reactor process (SBR) in order to enhance solids-liquid separation. Solids-liquid separation was good enough in the SBR coupled with EF (EF-SBR) and it was possible to maintain the concentration of mixed liquor suspended solids (MLSS) high in the EF-SBR. Under moderate organic loading condition (COD loading rate: 6 g/day), control SBR (C-SBR) showed similar treatment efficiencies with the EF-SBR. Under high organic loading condition (COD loading rate: 9.6 g/day), the solids-liquid separation in the C-SBR was deteriorated due to proliferation of filamentous bulking organisms at high F/M ratio. However, the EF-SBR was operated stably and with the high MLSS concentration (above 4,000 mg/L) regardless of the organic loading conditions during overall operating period leading to the satisfactory effluent quality. Gas production rate of the electrodes was gradually decreased because of anodic corrosion and scale build-up at the surface of cathode. However it could be partially overcome by use of corrosion-proof electrode material (SUS-316 L) and by periodic current switching between the electrodes.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2008.02a
• /
• pp.109-112
• /
• 2008

본 논문에서는 MPEG-4 HE-AAC의 SBR 부호기의 효율을 개선하기 위해 예측 SBR(Predictive-SBR)을 제안한다. SBR 부호기는 주부호기(core encoder)와 결합하여 적은 비트량으로 고주파 성분을 복원할 수 있게 한다. 본 논문에서는 SBR 데이터의 약 70%를 차지하는 포락선 정보를 부호화하는 방법을 개선하여 효율성을 높이고자 한다. 기존 SBR은 포락선 정보의 전송을 위해 다음과 같은 방법을 이용한다. 먼저 고주파 대역의 에너지를 스케일팩터 밴드 단위로 계산한다. 다음으로, 전송정보량의 감소를 위해 델타 코딩 방식을 이용하여 에너지 정보를 부호화한다. 본 논문에서는 SBR의 포락선 정보를 효과적으로 감축하기 위하여 고주파 대역의 에너지를 예측하는 방법을 이용한다. SBR 부호기의 입력 데이터가 SBR 복호기의 입력데이터와 동일하다는 가정 하에 선형 회귀(linear-regression) 기법을 이용하여 고주파 대역의 에너지를 추정한다. 그 후에 추정된 에너지와 원래의 고주파 대역 에너지의 오차를 델타 코딩을 이용하여 부호화한다. 정보를 전송할 때는 고주파 대역 에너지의 델타 코드와 예측 SBR에서 계산한 오차의 델타 코드 중 부호화에 필요한 비트량이 적은 방식을 선택하여 부호화하도록 한다. 그 결과 약 10% 정도의 정보량 감축 효과를 얻을 수 있다.

• Elastomers and Composites
• /
• v.35 no.3
• /
• pp.215-226
• /
• 2000

Cure characteristics of carbon black-filled rubber compounds with different rubber composition were studied using a rheometer. The carbon black-filled rubber compounds with single, binary, and ternary rubber compositions of natural rubber (NR), styrene-butadiene rubber (SBR), and butadiene rubber (BR) were used. Delta-torques of the NR/BR- and SBR/BR-based compounds with a high BR content were higher than those of the single rubber-based compounds. For ternary rubber-based compounds, the delta-torques of the compounds were lower when the difference in the rubber content ratios was small than when it was big. Scorch and optimum cure times of the rubber compounds became shorter by increasing the content of NR in the compounds while those became longer by increasing the SBR content. Cure rates of the rubber compounds increased with a decrease of the SBR content in the rubber compounds. Reversion ratios decreased with an increase of the SBR content in the rubber compounds.

• Elastomers and Composites
• /
• v.49 no.2
• /
• pp.117-126
• /
• 2014

Methylene diisocyanate (MDI) was investigated as a novel interfacial modifier to enhance the performances of poly(methyl methacrylate)-modified starch/styrene-butadiene rubber (PMMA-modified starch/SBR) composites. Owing to the formation urethane linkage on one side and ${\pi}-{\pi}$ adhesion on the other side, MDI acted as an intermediated linkage role in the PMMA-modified starch/SBR interfaces, which was evidenced by the morphological, mechanical, dynamic mechanical and thermal decomposition studies. As a result, the presence of MDI significantly improved the mechanical properties and thermal stability of PMMA-modified starch/SBR composites. In addition, the effect of starch concentration on the various performances of the resulted MDI/PMMA-modified starch/SBR composites, such as morphology, vulcanization characteristics, mechanical properties, toluene swelling behavior, and thermal stability were investigated and discussed in detail. The obtained MDI/PMMA-modified starch/SBR composites exhibited superior mechanical properties to carbon black/SBR (CB/SBR) composites, demonstrating the potential use of the renewable starch as a substitute for CB in the rubber compounds.

• Fashion & Textile Research Journal
• /
• v.10 no.1
• /
• pp.101-105
• /
• 2008

This study was concerned with the influence of reaction conditions on the surface friction properties of Syrene-Butadiene Rubber(SBR) sheet when it was chlorinated by chemical treatment method using the sodium hypochlorite and sulfuric acid. The results of this study were as follows. SEM photographs of chlorinated SBR surface showed uneven etching caused by the chlorination. In the FTIR spectra, the intensity of C=C peak of SBR was decreased with increasing the concentration of sodium hypochlorite. Otherwise there was no trace of C=C peak in spectrum of SBR treated with 5 wt% NaOCl with pH 0.1 for 90 seconds. EDX spectra showed that relative content of chlorine of SBR was increased with increasing the amount of sodium hypochlorite, and also affected with pH condition of acid solution. Friction angle and friction coefficient of SBR were influenced with concentration of sodium hypochlorite, but were not with pH condition of acid solution.