• Korean Journal of Metals and Materials
• /
• v.50 no.1
• /
• pp.45-51
• /
• 2012

Thermodynamics of carbon in manganese alloy melts is important in manufacturing low carbon ferromanganese and silico-manganese alloys. In order to predict the carbon solubility in liquid $Mn-Si-Fe-C_{sat}$ alloys as a function of melt composition and temperature, thermodynamic interactions among carbon, silicon and iron in carbon saturated liquid manganese should be known. In the present study, the effects of silicon and iron on the carbon solubility in Mn-Si, Mn-Fe and Mn-Si-Fe melts were measured in the temperature range from 1673 to 1773 K. The carbon solubility decreases significantly as silicon and iron contents increase in liquid manganese alloy. The interaction parameters among carbon, silicon and iron in carbon saturated liquid manganese were determined from the carbon solubility data and the Lupis' relation for the interaction coefficient at constant activity.

• Geomechanics and Engineering
• /
• v.18 no.1
• /
• pp.49-58
• /
• 2019

The effect of microstructure on the permeability of two saturated marine clays was studied through a series of falling head permeability tests and mercury intrusion porosimetry (MIP) tests. The key findings from this experimental study include the following results: (1) The permeability of undisturbed specimens is larger than that of reconstituted specimens at the same void ratio due to different soil fabrics, i.e., the pore size distributions (PSDs), even though they have the similar variation law in the permeability versus void ratio. (2) Different permeabilities of undisturbed and reconstituted specimens at the same void ratio are mainly caused by the difference in void ratio of macro-pores based on the MIP test results. (3) A high relevant relation between $C_k$ ($C_k$ is the permeability change index) and $e*_{10}$, can be found by normalizing the measured data both on undisturbed or reconstituted specimens. Hence, the reference void ratio $e*_{10}$, can be used as a reasonable parameter to identify the effect of soil fabric on the permeability of saturated soft clays.

• Economic and Environmental Geology
• /
• v.42 no.6
• /
• pp.561-574
• /
• 2009

Unsaturated/saturated groundwater flow and solute transport model, VSFRT2D(Variable Saturated Flow and Reactive Transport model) was developed considering effects of pumping, irrigation, and denitrification. VSFRT2D employed Richards equation as governing equation for groundwater flow and previously existing unsaturated models modified by including computational procedure of evapotranspiration at surface using Thornthwaite method when precipitation doesn't occur. Bioremediation processes based on monod kinetics are described using four nonlinear contaminant transport equations and three nonlinear microbes transport equations. The developed model was applied to field data in Hongsung area contaminated with nitrate. In order to identify the effect of precipitation, pumping, evapotranspiration, irrigation, fertilizer application, and various bioremediations on groundwater flow and contaminant transport, individual processes were separated and simulated. Then all results obtained from the individual processes are compared with each other. The simulation results show that bioremediation had a negligible effect on nitrate concentration change. However, pumping for irrigation, precipitation, and nitrogen fertilizer application showed profound influences on nitrate concentration change.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.7
• /
• pp.75-89
• /
• 2013

This paper describes a GIS-based geohydrologic methodology, called YSGWF (YonSei GroundWater Flow) for predicting the rainfall infiltration-groundwater flow of slopes. This physical-based model was developed by the combination of modified Green-Ampt model that considers the unsaturated soil parameters and GIS-based raster model using Darcy's law that reflects the groundwater flow. In the model, raster data are used to simulate the three dimensional inclination of bedrock surface as actual topographic data, and the groundwater flow is governed by the slope. Also, soil profile is ideally subdivided into three zones, i.e., the wetting band zone, partially saturated zone, and fully saturated zone. In the wetting band and partially saturated zones the vertical infiltration of water (rainfall) from surface into ground is modeled. When the infiltrated water recharges into the fully saturated zone, the horizontal flow of groundwater is introduced. A comparison between the numerical calculation and real landslide data shows a reasonable agreement, which indicate that the model can be used to simulate real rainfall infiltration-groundwater flow.

• Computers and Concrete
• /
• v.21 no.1
• /
• pp.67-74
• /
• 2018

A differential scheme based micromechanical framework is proposed to obtain the effective properties of the saturated concrete repaired by the electrochemical deposition method (EDM) considering the interfacial transition zone (ITZ) effects. The constituents of the repaired concrete are treated as different phases, consisting of (micro-)cracks, (micro-)voids and (micro-)pores (occupied by water), deposition products, intrinsic concrete made up by the three traditional solid phases (i.e., mortar, coarse aggregates and their interfaces) and the ITZs. By incorporating the composite sphere assemblage (CSA) model and the differential approach, a new multilevel homogenization scheme is utilized to quantitatively estimate the mechanical performance of the repaired concrete with the ITZs. The CSA model is modified to obtain the effective properties of the equivalent particle, which is a three-phase composite made up of the water, deposition products and the ITZs. The differential scheme is employed to reach the equivalent composite of the concrete repaired by EDM considering the ITZ effects. Moreover, modification procedures considering the ITZ effects are presented to attain the properties of the repaired concrete in the dry state. Results in this study are compared with those of the existing models and the experimental data. It is found that the predictions herein agree better with the experimental data than the previous models.

• Geophysics and Geophysical Exploration
• /
• v.15 no.1
• /
• pp.39-46
• /
• 2012

Recently, stratigraphic reservoirs are getting more attention than structural reservoirs which have mostly developed. However, recognizing stratigraphic thin gas reservoirs in a stacked section is usually difficult because of tuning effects. Moreover, if the reflections from the brine-saturated region of a thin layer have the same polarity with those from the gas-saturated region, we could not easily identify the gas reservoir with conventional data processing technique. In this study, we introduced a way to delineate the gas-saturated region in a thin layer reservoir using a spectral decomposition method. First of all, amplitude spectrum with the variation of the frequency and the incident angle was investigated for the medium which represents property of Class 3, Class 1 or Class 4 AVO response. The results show that the maximum difference in the amplitude spectra between brine and gas-saturated thin layers occurs around the peak frequency independent of the incident angle and the type of AVO responses. In addition, the amplitude spectra of the gas-saturated zone are greater than those of brine-saturated one in Class 3 and Class 4 at the peak frequency while those of phenomenon occur oppositely in Class 1. Based on the results, we applied spectral decomposition method to the stacked section in order to distinguish the gas-saturated zone from the brine-saturated zone in a thin layer reservoir. To verify our new method, we constructed a thin-layer velocity model which contains both gas and brine-saturated zones which have the same reflection polarities. As a result, in the spectral decomposed sections near the peak frequency obtained by Wigner-Ville Distribution (WVD), we could identify the difference between reflections from gas- and brinesaturated region in the thin layer reservoir, which was hardly distinguishable in the stacked section.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 1997.06a
• /
• pp.19-39
• /
• 1997

Extrusion conditions were optimized for blends of ground lamb and starch using a single-screw extruder for the purpose of producing expanded snack-type products. A central composite rotatable response surface methodology(RSM) design was used with variation in feed moisture, process temperature, and screw speed. The three variables significantly affected one or more of the measured physical properties of extrudates. The optimum conditions for minimum shear force values were 26.5% feed moisture, $148^{\circ}C$ process temperature, and 134 rpm screw speed. Lean ground beef, chicken, goat, lamb or mutton was blended with corn starch, and extruded at the optimum condition established from RSM experiments. Physical/rheological properties were generally similar, water activity was low (<0.12) and total aerobic plate counts were <10 for all products. Extrudates containing chicken had the highest ratio of polyunsaturated fatty acids to saturated fatty acids, whereas those containing beef had the highest ratio of monounsaturated fatty acids to saturated fatty acids. Sensory data indicated that texture was acceptable and flavor characteristics were not different among the products.

• Journal of Nutrition and Health
• /
• v.24 no.4
• /
• pp.378-392
• /
• 1991

A series of studies in monkeys and hamsters, and reevaluation of published human data, indicate that dietary saturated fatty acids exert a dissimilar metabolic impact on cholesterol metabolism. Myristic acid(14 : 0) appears to have a major cholesterol-raising effect by means of decreasing LDL receptor activity and by increasing the direct production of LDL (from sources other than VLDL-catabolism) Palmitic acid (16 : 0) appears neutral in most cases (plasma cholesterol<200mg/dl) or until the LDL receptor is down-regulated, as with high cholesterol intake or obesity. In such cases. the down-regulated LDL receptors coupled with an increased VLDL production (induced by 16 : 0 and 18 : 1) can divert VLDL remnants to LDL and expand the LDL pool. Furthermore. the cholesterolemic impact of any saturated fatty acid can be countered up to a saturable 'threshold' level by dietary linoleic acid (18 : 2) which up-regulates the LDL receptor. Once above this 'threshold' the major fatty acids (16 : 0, 18 : 0, 18 : 1, 18 : 2, 18 : 3) appear to exert an equal impact on the circulating cholesterol concentration.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.2
• /
• pp.163-169
• /
• 1992

A new analytical expression for the temperature variation characteristics of hydrogenerated amorphous silicon thin film transistors(a-si:H TFT), between 223K and 433K, is presented and experimentally verified. The results show that the experimental transfer and output characteristics at several temperatures are easily modeled between -5$0^{\circ}C$ and 9$0^{\circ}C$. The model is based on three functions obtained from the experimental data of IS1DT versus VS1GT. Theoretical results confirm the simple form of the model in terms of the device geometry. It was determined that as the temperature increased, the saturated drain current increased and, at a fixed gate voltage, the device saturated at increasingly larger drain voltages while the threshold voltages decreased.

• Journal of the Korean Ceramic Society
• /
• v.22 no.4
• /
• pp.26-32
• /
• 1985

The subcritical crack growth of sintered SiC is investigated under various corrosive atmospheres such as distilled water Murakami solution and saturated KOH solution. The KI-V diagrams are obtained by the load relaxation method and incremental displacement rate method using the double torsion technique. The obtained fracture mechanics parameters (n) of sintered SiC are 79 in Murakami solution and 39 in saturated KOH solution. These data indicate that the subcritical crack growth of sintered SiC is taking place in these two conditions and the stress-corrosion cracking is suggested to be the mechanism. With these KI-V diagrams the life of sintered SiC in these conditions is predicted.