• Advances in aircraft and spacecraft science
• /
• v.4 no.4
• /
• pp.437-448
• /
• 2017

The problem of flow through the vent is formulated as an unsteady, nonlinear, ordinary differential equation and solved using Runge-Kutta method to obtain pressure inside payload faring. An inverse problem for prediction of the discharge coefficient is presented employing measured internal pressure of the payload fairing during the ascent phase of a satellite launch vehicle. A controlled random search method is used to estimate the discharge coefficient from the measured transient pressure history during the ascent period of the launch vehicle. The algorithm predicts the discharge coefficient stepwise with function of Mach number. The estimated values of the discharge coefficients are in good agreement with differential pressure measured during the flight of typical satellite launch vehicle.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.04a
• /
• pp.533-539
• /
• 2013

Number of components and payload systems installed in satellites were found to be exposed to various disturbance sources such as the reaction wheel assembly, the control moment gyro, coolers, and others. A micro-level of vibration can introduce jitter problems into an optical payload system and cause significant degradation of the image quality. Moreover, the prediction of on-orbit vibration effects on the performance of optical payloads during the development process is always important. However, analyzing interactions between subsystems and predicting the vibration level of the payloads is extremely difficult. Therefore, this paper describes the analytical and experimental approach to microvibration effects on satellite optical payload performance with integrated jitter analysis framework, micro vibration emulator and satellite structure testbed.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.22.1-22.1
• /
• 2005

• Journal of Satellite, Information and Communications
• /
• v.1 no.2
• /
• pp.38-44
• /
• 2006

The COMS(Communication, Ocean & Meteorological Satellite) is the geostationary satellite which will be performing three main objectives such as meteorological service, ocean monitoring and Ka-band satellite communications. In order to accomplish these missions, the COMS system needs to implement a specific electrical/mechanical interface functions which are requested by each payload units. This paper describes a on-board interface hardware design for COMS Meteorological Imager(MI). The Meteorological Imager Interface Unit(MI2U) achieves, through MIL-STD-15533 system bus, the interface between the Spacecraft Computer Unit(SCU) and the instrument which is dedicated to MI. MI2U provides a necessary power input to MI from +50V Power Supply Regulator(PSR), and allows adaptation of the specific payload interfaces and protocol to COMS spacecraft.

• Journal of Astronomy and Space Sciences
• /
• v.15 no.2
• /
• pp.509-523
• /
• 1998

Before an actual military communications satellite is designed and constructed, a feasibility study should take place. The basic functions of such system can be observed and demonstrated in an X-Band payload simulator. For this purpose a Payload Concept Model (PCM) for X-Band payload subsystem has been developed to simulate the workings of an actual military communications payload. This paper explains and illustrates the mechanical design, manufacture, and integration of the PCM. Basic RF tests also have been performed in order to verify the design requirement of the system. The results demonstrate successful development of the PCM and operation without RF losses.

• Journal of Aerospace System Engineering
• /
• v.11 no.2
• /
• pp.30-34
• /
• 2017

This paper is concerned with product assurance for the secondary payload, which is used for technology and science research, in the satellite system, which consists primarily of the spacecraft and the primary payload (a high-resolution optical camera). The Korean satellite development program has successfully insured the safety of the spacecraft and primary payload. However, given the limits of budget and schedule, it is very important to establish adequate product assurance for the secondary payload, which has a lower priority than the spacecraft or primary payload. This paper studies the concept of product assurance for the secondary payload of technological and scientific equipment.

• Current Industrial and Technological Trends in Aerospace
• /
• v.6 no.2
• /
• pp.116-124
• /
• 2008

Korea Aerospace Research Institute(KARI) is developing COMS (Communication, Ocean and Meteorological Satellite) which is scheduled to take off in June, 2009. COMS is the first geosynchronous satellite developed in Korea which is able to perform three missions 24 hours a day. The oceanic payload was transferred from France to Korea in November, 2008 and made it possible to integrate all three payload together. After the integration COMS is planned to be transferred to Guiana Space Center (on French territory) to be launched. In this paper the trend of domestic and international development of the multi-purpose geosynchronous satellite considering the COMS is the first operational geosynchronous multipurpose satellite in the world.

• Journal of Aerospace System Engineering
• /
• v.11 no.6
• /
• pp.76-83
• /
• 2017

The MIL-STD-1553 standard has been used for over 40 years as a data bus technology for high-reliability mobile systems. However, 1 Mbps transmission speed is absolutely insufficient to implement sensor data convergence, which is an essential requirement of modern aerospace systems. In this paper, we analyze the hierarchical structure of the MIL-STD-1553B version specification and describe several methods to increase the transmission speed without losing the advantages of the existing MIL-STD-1553 bus. In addition, we analyzed the R & D cases of the high-speed MIL-STD-1553 technology, which have been conducted in leading aerospace countries.

• Journal of Astronomy and Space Sciences
• /
• v.20 no.4
• /
• pp.339-350
• /
• 2003

Engineering qualification model payload for a communications and broadcasting satellite(CBS) was developed by ETRI from May, 2000 to April, 2003. For. the purpose of functional test and verification of the payload, a real-time hardware-in-the-loop(HITL) CBS simulator(CBSSIM) was also developed. We assumed that the spacecraft platform for the CBSSIM is a geostationary communication satellite using momentum bias three-axis stabilization control technique based on Koreasat. The payload hardware is combined with CBSSIM via Power, Command and Telemetry System(PCTS) of Electrical Ground Support Equipment(EGSE). CBSSIM is connected with PCTS by TCP/IP and the payload is combined with PCTS by MIL-STD-1553B protocol and DC harness. This simulator runs under the PC-based simulation environment with Windows 2000 operating system. The satellite commands from the operators are transferred to the payload or bus subsystem models through the real-time process block in the simulator. Design requirements of the CBSSIM are to operate in real-time and generate telemetry. CBSSIM provides various graphic monitoring interfaces and control functions and supports both pre-launch and after-launch of a communication satellite system. In this paper, the HITL simulator system including CBSSIM, communications payload and PCTS as the medium of interface between CBSSIM and communications payload will be described in aspects of the system architecture, spacecraft models, and simulator operation environment.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.776-779
• /
• 2006

KOMPSAT-5 that will be launched at the end of 2008 has a SAR (Synthetic Aperture Radar) payload. Since the Calibration and Validation of a satellite SAR is different from a passive optical camera as KOMPSAT-2 MSC and KOMPSAT-3 payload, we have started from the basis of SAR system. Firstly, the general SAR Cal/Val parameters have been gathered and defined. Secondly, we have been choosing the Cal/Val parameters suitable to KOMPSAT-5. Thirdly, the methods of SAR Cal/Val with the parameters have been studied. Fourthly, the requirement of Cal/Val devices and Cal/Val site has been studied.