• Journal of the Korean Society of Costume
• /
• v.56 no.6 s.105
• /
• pp.145-152
• /
• 2006

Dyeing properties of sargent cherry of Prunus sargentii Rehder were investigated with silk fabrics. The absorbed wave lengths at UV-VIS spectrometer were 362nm, 386nm, 430nm, and 512nm. The K/S value showed high in following conditions: 100%(w/w) stock solution, 60 minutes of dyeing time, 80$^{\circ}C$ of dyeing temperature, and 5 times of dyeing repetition. The K/S value showed higher in post-mordant than in pre-mordant, and the change of color did not appear in pre-mordant samples. They were colored greenish yellow in post-mordanted Cu and Fe. The highest dyeability and $\Delta$E showed in post-mordanted Fe. The light fastness showed 3-4 in post-mordanted Fe, 1-2 in pre-mordanted Al, and washing and perspiration fastnesses showed also good results in post-mordanted Fe.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.6
• /
• pp.497-504
• /
• 2009

The characteristic changes in weight, moisture content, and dimension at the early adsorptiondesorption stage of PEG-treated Korean pine (Pinus koraiensis), Japanese larch (Larix kaempferi), mongolian oak (Quercus mongolica) and sargent cherry (Prunus sargentii) woods were investigated. The wood samples were treated with PEG 1000, 2000 and 4000, and conditioned at the relative 98%, 65% and 20% for humidities of one week. The weight of Korean pine, Japanese larch and sargent cherry woods treated with PEG 1000 and 2000 during the adsorption-desorption was significantly changed, but mongolian oak was slightly changed. Moisture content was highly Moisture content was highly fluctuated by the change of relative humidity in the three species except oak wood. Although the weight of PEG-treated wood; however, changes in dimension could be prevented by PEG treatment in all species tested.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.4
• /
• pp.478-485
• /
• 2015

The aim of this study is to analyze the combustion and thermal properties in order to establish baseline data for the fire safety evaluation of domestic timbers. The combustion properties such as heat release rate, total heat release, gas yield, and mass loss were analyzed by the method of cone calorimeter test and thermogravimetry (TGA). Thermal decomposition temperatures of the specimens by TGA were recorded as $359.83^{\circ}C$ for White pine, $359.80^{\circ}C$ for Red-Leaved Hornbeam, $363.14^{\circ}C$ for Carolina poplar, $358.59^{\circ}C$ for Konara oak, and $362.11^{\circ}C$ Sargent cherry. Red-Leaved Hornbeam showed the highest value of heat release rate, but, Carolina poplar wood showed the lowest value. In case of the total heat release, Red-Leaved Hornbeam wood showed the highest value and Carolina poplar wood showed the lowest one. The gas analysis results showed that Sargent cherry wood had the lowest value of 0.021, and Konara oak had the highest at 0.031 in the $CO/CO_2$. The minimum value of mass reduction was recorded as 87.57% for Sargent cherry, but, on the other hand, it was 95.03% for Konara oak. There was a correlation between the gas generation of CO and $CO_2$, and combustion behavior of woods. These results are expected to be usful for providing a fundamental guideline with the fire safety of wood use in interior applications.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.2
• /
• pp.206-220
• /
• 2023

In the royal publishing process of the Joseon Dynasty, the main species of wood used for woodblock printing was recorded as Jajak-mok. Although the name Jajak-mok may suggest Jajak-namu(white birch), it is presumed to refer to a different type of wood than Jajak-namu based on its recorded habitat and usage in historical documents. The aim of this paper is to clarify that during the Joseon Dynasty, the term Jajak-mok referred to Geojesu-namu (Korean birch), while Jajak-namu was called Hwa-mok(樺木). Additionally, this paper explores how the term Jajakmok eventually became the name of white birch, Jajak-namu, used today. In the mid-18th century, Japan used the character 樺(hwa) to refer to Beot-namu(Sargent cherry). As Japanese encyclopedias entered Joseon, the term Hwa-mok began to refer to both Beot-namu and Jajak-namu, which is also called Bot-namu. Since the pronunciation of Boet-namu and Bot-namu are similar, the two trees were eventually unified under the name Boet-namu. In the 20th century, the official names of three trees were established. According to notifications issued by the Ministry of Agriculture and Commerce of the Korean Empire in 1910 and the Governor-General of Chosen in 1912, Hwa-mok(white birch) was renamed asJajak-namu. In 1968, Beot-namu(Sargent cherry) retained its original name, and Jajak-mok(Korean birch) was remained . In modern Chinese character dictionaries, the meaning of 樺(hwa) is listed as "1. Beot-namu(Sargent cherry), 2. Jajak-namu(white birch)." From this, we can infer the historical background in which the names of these three trees were mixed up.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.2
• /
• pp.87-94
• /
• 2002

This study was carried out to evaluate bending property on principal domestic species such as sargent cherry(Prunus sargentii), bitter wood(Picrasma quassioides), horn beam(Carpinus laxiflora), cork oak(Quercus variabilis), birch(Betula schmidtii), painted maple(Acer mono), basswood(Tilia amurensis), red pine(Pinus densiflora), pitch pine(Pinus rigtda), royal pawlonia(Paulownia tomentosa) by microwave heating. In this study, radius of curvature(ROC) for bending process was classified by radius of curvature(ROC) of bending plate such as 4 cm, 6 cm, and 10 cm, and thickness of metal-strap(TMS) was 0.6 mm and 0.8 mm. Bending process was successfully operated for 100 percent in bitter wood, horn beam, birch and painted maple. On the other hand, there was a success rate of 58 percent in sargent cherry and 83 percent in cork oak and 29 percent in basswood and 8 percent in royal pawlonia which is the worst bending property. All specimens of basswood and royal pawlonia were broken at 4 cm of ROC. Success rate of bending property was shown 44 percent in red pine and 56 percent in pitch pine. TMS has an effect on only drying speed in drying process than difficulty and facility of bending property. It was considered that the thinner TMS in drying process is the faster in drying speed of bent wood.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.1
• /
• pp.19-29
• /
• 2016

The purpose of this study is to analyze the combustion and thermal properties in order to establish baseline data for the fire safety evaluation of imported wood. The combustion properties such as heat release rate, total heat release, gas yield, and mass loss were analyzed by the method of cone calorimeter test according to KS F ISO 5660-1 and thermogravimetric analysis (TGA). Analyzed species are five kinds of species as Merbau, Mempening, Garo Garo, Malas, and Dillenia. The heat released rate values showed the highest value of Malas as $375.52kW/m^2$, and Dillenia showed the lowest value as $133.30kW/m^2$. The data values were confirmed in the following order: Malas > Mempening > Garo Garo > Merbau > Dillenia. In case of the total heat release, it was measured in the following order: Mempening > Malas > Garo Garo > Merbau > Dillenia. The gas analysis results were that Dillenia showed the highest value of 0.034. Also, Mempening and Malas showed the lowest at 0.020 in the $CO/CO_2$. Min of mass reduction was shown as 74.79% Sargent cherry, on the other hand, Malas had a 83.52%. It showed a correlation between and of the CO and $CO_2$ generation and combustion characteristics of wood. The thermal decomposition temperature of the wood in the TGA were as follow that Merbau $348.07^{\circ}C$, Mempening $367.57^{\circ}C$, Garo Garo $350.59^{\circ}C$, Malas $352.41^{\circ}C$, Dillenia $364.33^{\circ}C$. The aim of this study is to determine the combustion properties of imported wood according to ISO 5660-1. And, based on the results of this study, we would proceed with further research for improving the fire safety of wood for construction.