• 한국산림과학회지
• /
• 제85권3호
• /
• pp.343-346
• /
• 1996

리기다소나무재의 변색 부위로부터 분리한 변색균을 다시 건전 목재에 접종하여 이 균의 목재 침입경로를 구명한 바, 처음 균사가 목재내 방사유세포에 침입하여 방사유세포 안에서 수평 방향의 이동을 계속하다가, 시간이 경과하면 가도관내로 이동하여 이 가도관을 통로로 하여 수직 방향으로 확산을 계속하였다. 침입 90일이 지나면 목재내 각 조직으로의 침입이 완료되어 균사가 세포내강에 만연한 것을 알 수 있었다. 또한 메탄올 추출물은 변색균의 목재 침입 경로에 영향을 미치지 않는 것으로 분석되었다.

• 한국산림과학회지
• /
• 제85권2호
• /
• pp.325-328
• /
• 1996

리기다소나무재의 변색 부위로부터 분리한 변색균을 다시 건전 목재에 접종하여 이 균의 목재 침입 경로를 구명한 바, 처음 균사가 목재내 방사유세포에 침입하여 방사유세포 안에서 수평 방향의 이동을 계속하다가, 시간이 경과하면 가도관내로 이동하여 이 가도관을 통로로 하여 수직 방향으로 확산을 계속하였다. 침입 90일이 지나면 목재내 각 조직으로의 침입이 완료되어 균사가 세포내강에 만연한 것을 알 수 있었다. 또한 메탄올 추출물은 변색균의 목재 침입 경로에 영향을 미치지 않는 것으로 분석되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제31권1호
• /
• pp.46-51
• /
• 2003

본 연구는 라디에타소나무 제재목의 균 변색을 제거하기 위한 표백처리의 사용 가능성을 조사하기 위하여 수행하였다. 염소계 표백제인 아염소산나트륨과 차아염소산나트륨은 표백조건(약제농도, 처리온도, 처리시간)의 조절에 따라 만족할만한 변색제거 효과를 얻을 수 있었다. 비염소계 표백제인 과산화수소는 표백조건의 조절만으로는 변색제거가 불가능하였으나 규산나트륨과 수산화나트륨을 활성제로 첨가하는 경우에는 염소계 표백제보다 탁월한 변색제거 효과를 나타내었다. 그러나 활성제 첨가에 따라 재색의 녹색화 문제가 발생하였는데, 앞으로 이러한 문제점을 해결하기 위한 연구가 진행되어야 할 것이다. 또한, 앞으로 본 연구를 통해 개발된 변색제거 방법의 현장 적용을 위한 후속 연구도 필요하다고 본다.

• Journal of the Korean Wood Science and Technology
• /
• 제24권2호
• /
• pp.46-54
• /
• 1996

This study was carried out to investigate the vacuum drying characteristics of 50mm- and 75mm- thick tree disks of some domestic softwoods for substituting the conventional hardwoods as the materials for wood crafts. Though the elapsed drying times from green to in-use moisture content(MC) were largely shortened by vacuum drying, the tree disks treated by EWS couldn't be dried to in-use MC, and so sapwood stains also were occurred severely. We suggest EWS treatment is undesirable for the species with very high sapwood portion or vacuum drying with hot water circulation heating system. Heart checks were slight, but sapwood checks, which have never been trouble in drying process of tree disks, were severe. For the reasonable explanation it is suggested MC differences between sapwood and heartwood were large and most of tree disks had already no barks before drying test. Ginkgo was vacuum-dried with very slight drying defects such as heart checks, sapwood checks. V-cracks and sapwood stains. In Korean red pine and pitch pine V-cracks were severely occurred. And it was found the special feature that most of these defected tree disks contained several V-cracks within one tree disk. It can be considered as the causes that the region of sapwood was defected by the several checks at the early drying stage because of the steep MC gradient along the radial direction, and then at the later drying stage the drying stresses due to differential shrinkage were concentrated on these brittle spots.

• Journal of the Korean Wood Science and Technology
• /
• 제14권1호
• /
• pp.55-60
• /
• 1986

Discoloration sensitivities of woods grown in this country haven't reported yet. Therefore we examined discoloration sensitivities of domestic wood specimens to iron (0.1 %, $FeCl_3.6H_2O$), alkali (pH 12.0, NaOH). acid (pH 1.0, $C_2H_2O_4$) and exposing to sunlight (40 hrs), Thirty-six hardwood species were collected and examined. All specimens were prepared from heartwoods of the collected species. But the specimens of 4 Betula species were divided into sapwoods and heartwoods. By iron stain, the color differences (${\Delta}E$) of 21 wood specimens including one Betula sapwood showed above 12.0, which means strong discoloration sensitivities, and of 3 specimens including one Betula sapwood showed below 2.5, which means weak discolorations. The most strong iron discoloration species was Jungkukgulpi-namu (Pterocarya stenoptera). By alkali stain, the color differences (${\Delta}E$) of 3 wood specimens showed above 9.0, which means strong discoloration sensitivities, and of 18 wood specimens including 4 Berula sapwoods showed below 2.5, which means weak discolorations. By acid stain, the color differences (${\Delta}E$) of 6 wood specimens showed above 10.0 which means strong discoloration sensitivities, and of 12 wood specimens including one Betula sapwoods showed below 2.5, which means weak discolorations. By exposing to sunlight, the color differences (${\Delta}E$) of 31 wood specimens including one Betula sapwoods showed below 6.5, which means, strong discoloration sensitivities, and of only one specimens showed below 2.5, which means weak discoloration. The most strong discoloration species by exposing to sunlight was Guirung-namu (Prunus padus). In general, it was shown that hardwoods grown in Korea were most subject to change of color by exposing to sunlight and next were by iron stain. Domestic hardwoods showed some differences in discoloration sensitivities from domestic softwoods previously reported.

• 한국가구학회지
• /
• 제24권4호
• /
• pp.345-349
• /
• 2013

Yellow poplar is well known commercial hardwood species in the world because of its availability, rapid growth, large size, excellent form, early natural pruning, and the good working quality of the wood. Therefore, yellow poplar (Liriodendron tulipifera L.) has been adopted in South Korea for decades ago, and its cultivating the saplings and silvicultural system have been studied. However, yellow poplar is still embroiled in controversy for utilization of use and worth. This species has not only advantages such as lower weight, light color, and higher machinability and bending processing, but also has disadvantages which are bad smell and different colors on heartwood and sapwood. In this study, the objective was that use of yellow poplar board as furniture materials by drying and painting process. Thirty years old yellow poplar was cut and dried for 7 days by high-frequency dryness. Adjustment of color tone to walnut color was conducted with multiple colorants and various number of spread times. Uniform color of yellow poplar on heartwood and sapwood was accomplished by applying 1 time stain (green), 2 times transparent primer, 1 time middle-painting (walnut), and 2 times top-painting (walnut) in sequentially. The painted yellow poplar board was used to manufacture table and dressing table. During the furniture manufacture process, no critical issues were occurred on part of jointing and painting. This painting method may be useful data for future use of yellow poplar as furniture materials.