• Korean Journal of Soil Science and Fertilizer
• /
• v.16 no.1
• /
• pp.14-19
• /
• 1983

Comparison and evaluation of various wellknown methods to determine the saturated hydraulic conductivity of soil were attempted in order to choose a convenient and reliable method applicable, at least, to Bonryang sandy loam (coarse loamy over sandy, mixed, mesic family of Typic Udifluvents). Three experimental methods, inversed auger hole, infiltrometer, and core sample method, were used for this purpose. The results were summarized as follows: 1. The inversed auger hole method was highly correlated with the infiltrometer method while the core sample method was poorly correlated with other two methods. 2. The inversed auger hole method was proved to be convenient and reliable method to measure the hydraulic conductivity of upland coarse textured soils in situ. 3. The hydraulic conductivity determined by the infiltrometer method converged to a constant value after 80 to 100 minutes from starting of measurement. 4. The conductivity determined by the inversed auger hole method approached to a constant value at 5 or 6th run of measurement. 5. The hydraulic conductivity determined by the core sample method was greatly under estimated in comparison with the values obtained by other two methods.

• Korean Journal of Medicinal Crop Science
• /
• v.2 no.3
• /
• pp.193-197
• /
• 1994

Bupleurum falcatum was cultivated in plots of different soil textures, which were sandy loam(SL), loam(L), and clay loam(CL). The growth charafters of shoot and root parts in SL and L plots were better than CL one, and root yield was the most excellent in SL one. But the contents of total saikosaponins and methanol extract in its roots were the highest in CL plot. In any soil textures, one and two year old plants showed almost the same results in growth characters and saikosaponins contents. The growth and root yield of two year old plants were higher than those of one year old ones, but the contents of methanol extract and saikosaponins were lower. Flant characters were highly negative-correlated with the contents of saikosaponins and methanol extract.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.5
• /
• pp.31-40
• /
• 2017

The aim of this study is to estimate net irrigation requirements for red pepper during growing period using soil moisture model. The soil moisture model based on water balance approach simulates soil moisture contents of 4 soil layers in crop root zone considering soil moisture extraction pattern. The LAMP (Land-Atmosphere Modeling Package) high resolution meteorological data provided from National Center for AgroMeteorology (NCAM) was used to simulate soil moisture as the input weather data. Study area for the LAMP data and soil moisture simulation covers $36.92^{\circ}{\sim}37.40^{\circ}$ in latitude and $127.36^{\circ}{\sim}127.94^{\circ}$ in longitude. Soil moisture was monitored using FDR (Frequency Domain Reflectometry) sensors and the data were used to validate the simulation model from May 24 to October 20 in 2016. The results showed spatially detailed soil moisture pattern under different weather conditions and soil texture. Net irrigation requirements were also different by location reflecting the spatially distributed weather condition. The average of the requirements was 470.7 mm and averages about soil texture were 466.8 mm, 482.4 mm, 456.0 mm, 481.7 mm, and 465.6 mm for clay loam, sandy loam, silty clay loam, clay, and sand respectively. This study showed spatial differences of soil moisture and the irrigation requirements of red pepper about spatially uneven weather condition and soil texture. From the results, it was demonstrated that high resolution meteorological data could provide an opportunity of spatially different crop water requirement estimation during the irrigation management.

• Korean Journal of Environment and Ecology
• /
• v.18 no.2
• /
• pp.210-220
• /
• 2004

The purpose of this study is to propose the raw data of conservation and restoration by analyzing the environmental and growth characteristics in Abeliophyllum distichum habitats. The types of soil were sandy loam, loam and silty clay loam and the correlation on chemical characteristics of soil appeared that T-N and C.E.C were highly correlative. In case of growth characteristics, height and diameter in 1st site, crown in 2nd site, number of leaves in 5th site and number of seeds in 4th site were better than other sites. In the results of correlation on growth characteristics, height and diameter were highly correlative. In case of growth and chemical characteristics, EC and height were highly correlative. In the results of regression analysis, R-square of height and EC was some 70.4％ and that of number of leaves and T-N was some 70.2%. To conserve and restore Abeliophyllum distichum habitats, there were demanded that the accurate environmental analysis that considered such diverse factors as light intensity, temperature, genetic quality and so forth.

• Journal of Environmental Health Sciences
• /
• v.36 no.5
• /
• pp.383-390
• /
• 2010

Exposure to fugitive dust can contribute to several respiratory health problems, and proper sampling of fugitive dust is necessary to assess exposure. However, field sampling of soil dust encounters problems from spatial and temporal differences in soil properties, field operations, and meteorological conditions. To minimize these problems, we designed a dust generator that simulates dust generation from soil. The dust generator consisted of a rotating chamber where soil samples were loaded and tumbled, and a settling chamber, where airborne soil dust samples were collected. As standard operating conditions, we decided on 2 g soil mass, 10 min sampling time, and 20 rpm rotating speed, with a flow rate of 30 l/min, based on three common soil textures of loam, sandy loam and silt loam. To evaluate optimal operating conditions, we used mixtures of Joomoonjin silica sand and clay. Although the average $PM_{10}$ concentration of Joomoonjin silica sand was low, dust concentrations were increased by an increased content of clay. The dust concentrations were consistent across repeated experiments, and showed similar concentration profiles during the sampling time with mixtures of clay and sand (coefficient of variation was $13.6{\pm}w;7.1%$). The results demonstrated that these standard operating conditions were suitable for the dust generator, which can be used to investigate variations in soil properties that affect dust production and potential potency of fugitive dust exposure.

• Korean Journal of Food Science and Technology
• /
• v.30 no.2
• /
• pp.313-318
• /
• 1998

Using direct headspace sampling (DHS) method, volatile terpenoid content was measured according to carrot cultured areas and various portions of carrot. In comparison of volatile terpenoid content in xylem and phloem of carrot, every volatile terpenoid was distributed highly in the xylem rather than the phloem of carrot. The carrot was divided into three different sections; upper (crown), middle (midsection), and lower part (tip), and the volatile terpenoids were measured. The content of ${\alpha}-pinene,\;{\beta}-pinene,\;{\beta}-myrcene,\;and\;{\gamma}-terpinene$ tended to be distributed highly in the upper part rather than the lower part, whereas the content of terpinolene and total terpenoids tended to be high in the lower part. In comparison of volatile terpenoid content according to the carrot cultured areas, volatile terpenoid content of carrot cultured in Cheju island was higher than Yangsan and Haenam areas. In case of total terpenoids, the carrot clutivars cultured in Cheju island contained $1.6{\sim}2.3\;times$ higher than those of Yangsan, and $1.5{\sim}2.4\;times$ higher than Haenam. In order to investigate the above results, we sampled out soils from the carrot fields and measured physical and chemical characteristics of the soils. The pH did not show much difference in the three areas. However the organic carbon, total nitrogen, cation exchange capacity, and total exchangeable cation in soil from Cheju were $2.4{\sim}3.0\;times$ higher than Yangsan and $3.9{\sim}7.1\;times$ higher than Haenam. The physical characteristics of the soils was investigated. The soil from Cheju island was found to be loam; Yangsan, sandy loam, and Haenam, clay loam.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.4
• /
• pp.307-314
• /
• 1989

Barley, garlic, and soybean were cultivated in the silt loam, sandy loam, and loam, respectively, and the absorbing patterns of N, P, and K during growing of the crops were determined. While, the leaching of N, P, and K applied in the above soils in four levels of topsoil depths and in four leachate levels of excess precipitation was measured through the column. The depths of the soil were devised to 20, 35, 50, and 65cm, and the levels of excess water were classified to each leachate of 20, 40, 60, and 80mm precipitation, and nitrogen, phosphorous, and potassium in each fraction of the leachate were analyzed. By the analyses of the chemical components during growth of the crops, their absorbing patterns of N, P, and K were investigated. The order of N-leachings in the soils was sandy loam > loam > silt loam, and the leaching of $K_2O$ was very similar to N. The leaching of $P_2O_5$ was slight in all kinds of the soils. By the combination of the absorbing patterns of the crops in three kinds of soils and the leaching of the nitrogen in four levels of soil depth and four levels of excess precipitation, the method to replace the nitrogen lost by leaching was presented.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.2
• /
• pp.131-138
• /
• 1996

Soil crusting and hardening as a result of drying after rainfall were examined in relation to seedling emergence by employing five rice varieties (Italiconaverneco, Dadazo, and Galsaekggarakshare, Dongjinbyeo and Sumjinbyeo) and two barnyardgrass species (E. crus-gallj var. oryzjcola and E. crus-galli var. praticola). Sandy loam, loam, and silty loam soils were used. The artificial rainfall of 0, 20 and 40mm were applied after sowing and covering with 4cm soil. Air temperature and solar radiation averaged over 9 days after seeding was 31.3$^{\circ}C$ and 16.9MJ /m$^2$, respectively. Soil strength increased rapidly by drying after artificial rainfall, being greater in soils with greater amount of clay and artificial rainfall. Soil crust was formed on the surface with artificial rainfall in all soils tested. However, soil crust was exfoliated in silty loam and loam soil, and lifted as seedlings emerge. Seedling emergence of rice varieties was decreased by rainfall treatments. Sumjinbyeo and Dongjinbyeo showed much poorer seedling emergence especially in sandy loam soil than the other varieties. Poor seedling emergence of these varieties might have been caused by delayed seedling emergence which had made them expose to greater soil strength. Seedling emergence of barnyardgrasses showed no differences among soil textures and rainfall treatments, because they emerged rapidly before soil crusting and hardening were proceeded enough to hamper seedling emergence. Seedling emergence of Sumjinbyeo and Dongjinbyeo decreased with increasing soil strength averaged over 3 days to 5 days after seeding, being lowered to 80% at soil strength of 1.0kg/cm$^2$ and to 50% at 1.7kg/cm$^2$. Emergence speed of barnyardgrasses was faster than rice varieties, and E. crus-galli var. oryzjcola than E. crus-galli var. praticola. Italiconaverneco and Dadazo showed faster emergence in rice varieties. Galsaekggarakshare showed slower emergence speed than these two varieties with similar seedling emergence percentage. The greater and faster elongations of mesocotyl and incomplete leaf in rice, and of mesocotyl in barnyardgrass were the characteristics responsible for higher seedling emergence rate in the environment examined.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.3
• /
• pp.268-274
• /
• 2010

The properties of upland soils are much more dependent upon topography than those of paddy soils, and they give us very useful information to manage the upland fields. Therefore, we investigated the selected physical and chemical properties of upland soils at 84 and 150 topographic sampling sites, respectively. The topographic sites included 34.7% of local valley and fans, 18.7% of hilly and mountains, 20.0% of mountain foot slopes, 14.0% of alluvial plains, 8.0% of diluvium, and 4.6% of fluvio-marine deposits. Based on the investigation, soil textures in Jeonbuk upland fields were mostly sandy loam, sandy clay loam, clay loam, and clay soils, especially sandy clay loam soils were evenly distributed in all of the topographic sites. Soil slopes in the sites ranged from 0 to 15%, which showed an optimal condition for farm land. Soil bulk density and compaction values were from 1.19 to 1.24 g $cm^{-3}$ and from 12.1 to 13.9 mm, respectively. As comparing with the optimal conditions of soil chemical properties for upland soils proposed by National Institute of Agricultural Science and Technology, Korea, 37%, 42.7%, 93.0% of the sites were within optimum levels with soil pH, content of soil organic matter, and electrical conductivity, respectively. However, 64.0%, 47.3%, 48.7%, and 42.7% of the upland soils contained excess levels of exchangeable K, Ca, and Mg, and available phosphorus, respectively. In addition, the contents of heavy metals, As, Cd, Cr, Cu, Hg, Ni, Pb, and Zn, in the Jeonbuk upland soils were much less than threshold levels.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.3
• /
• pp.279-284
• /
• 1999

Fly ash is the fine ash particles that are flying out of chimney of the thermoelectric power plant where coals are used as fuel. There are two kinds of fly ashes from anthracite and bituminous coal. By scanning electron microscope(SEM) morphological feature of fly ash was confirmed to the exact spherical particles with the diameter variation from the fine to the largest about $50{\mu}m$(mainly silty particle). Surface of anthracite ash particle was very smooth but that of bituminous was somewhat coarse. To find the utilization of fly ash for improving soil permeability, soils of 4 kinds of different texture, clay, clay loam, sandy clay loam and sand mere applied with 7 levels of fly ash: 0, 10, 20, 40, 60, 80, 100%(w/w) and their saturated hydraulic conductivity(Ks) were determined at each application by constant head method. In clay soil with low water permeability, Ks value was increased about 10 times from $10^{-8}$ to $10^{-7}m\;s^{-1}$ level with application of 10% fly ash and it was slightly increased with increasing fly ash application from 40 to 80%. In clay loam Ks value was about $10^{-7}m\;s^{-1}$ level and its value was not influenced by the fly ash application. In sandy clay loam with relatively high permeability, Ks value was decreased about 10 times from $10^{-5}$ to $10^{-6}m\;s^{-1}$ level with application of 10% fly ash and also decreased about 50 times from $10^{-5}$ to $5.0{\times}10^{-7}m\;s^{-1}$ with application of more than 20% fly ash. In sand with very high permeability, Ks value was decreased about 10 times from $10^{-4}$ to $10^{-5}m\;s^{-1}$ level with application of 10% fly ash and also decreased about 100 times from $10^{-4}$ to $10^{-6}m\;s^{-1}$ level with application of 20% fly ash and continuously decreased about 500 times from $10^{-4}$ to $5.0{\times}10^{-7}m\;s^{-1}$ level with application of more than 40% fly ash. In conclusion by fly ash application saturated hydraulic conductivity was increased in clay soil, on the contrary it was decreased in sandy soils. Fly ash may be used as a material for amelioration of soil permeability.