• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1A
• /
• pp.229-236
• /
• 2006

Recently, the use of crushed sand produced by the crushing of stone is continuously increasing to reach an utilization rate of about 20% of the whole fine aggregates that is foreseen to grow larger in the future. However, the lack of recognition concerning quality during the production of crushed sand results in the use of crushed sand that do not satisfy the KS F 2527 standard during the manufacture of concrete. And, studies investigating the effects of such crushed sand on concrete are still neglected. Therefore, this study intends to provide data that can be exploited for concrete using crushed sand through the analysis of the effects of the grain shape of crushed sand on the quality of concrete. Results revealed problems in the workability, air entraining and durability for a value of 53% for the solid volume percentage for shape determination specified by the current KS F 2527. Analysis showed that the adjustment of the solid volume percentage for shape determination from the currently specified 53% to 55% will improve the quality of concrete using crushed sand in high strength concrete particularly.

• Asian Journal of Turfgrass Science
• /
• v.9 no.3
• /
• pp.187-198
• /
• 1995

The objective of this research was to produce sod by box seeding for zoysiagrass or by vegetative propagation for zoysiagrass and manilagrass.1 Various ratio of peatmoss to sand(v /v) were prepared to find idea[ medium for fast and light weight sod production. Then, the days required for sod formation, the effect of growth regulators on the growth of turfgrass, and the various storage methods for winter keeping of sods were also investigated. 1.The mixed medium of sand and peatmoss(v /v, 1 : 2) showed more biomass production than that of sand. 2.In comparison of seeding rate of zoysiagrass, the amount of log /$m^2$ was most effective in the fast and dense sod formation. The amount of 20g /$m^2$ also showed fast sod formation. But, it resulted in weak plant and less tillering. During April to June, about 100 days were required to form sod with seeding rate of 5g /$m^2$ regardless of seeding time. Whereas 80 days were required to form sod in the rate log /$m^2$, which was 20 days shorter than that of 5g /$m^2$. 3.More than 85% of shoots in sod stored in field or plastic house during the winter time resumed the growth in good appearance after transplanting. The whole covering of ground with sod resulted in less weeds and faster formation of lawn. 4.Vegetative propagation of manilagrass showed about 7 to 15 days faster formation of sod than that of zoysiagrass. Application of GA increased shoot growth and BA increased the total number of tillering. However, the effects of the combined application of GA and BA were negligable.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.10
• /
• pp.687-693
• /
• 2013

Coastal sand dunes have been seriously damaged caused by the development thoughtless for the environment and coastal erosion and destruction due to artificial structures like coast roads and breakwater. Hereupon, in this study we made a library of rhizobacteria that have the plant growth-promoting ability for plant rhizosphere of indigenous plants inhabiting in a coastal sand dune as well as the strong tolerance to salt, and evaluated the plant growth-promoting ability of these strains. Furthermore, we evaluated the effect of rhizobacteria on the growth rate of saline tolerant plants in sandy soil; selected out the most useful micro-organism for the restoration of a damaged sand dune. The effect of inoculation of strains selected from the first experiment on the growth of Peucedanum japonicum and Arundo donaxes planted in a coastal sand dune was evaluated. As a result, Bacillus aerius MH1RS1 had plant growth promoting activities: indole acetic acid (IAA) production, siderophores and 1-aminocyclopropane-1-carboxylate deaminase (ACC deaminase) activity, and also had a salinity tolerance. Also, in case of Peucedanum japonicum, the length of stems and weights of roots were enhanced by the inoculation of B. aerius MH1RS1. Fresh weights of stems and weights of roots in experimental group were, in particular, increased by 25% comparing with the control group. For an Arundo donax in experimental group, plant length increased by 18%, and weight of roots by 20% which is significant.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.10 no.2
• /
• pp.77-83
• /
• 1990

A three year's field experiment was carried out on newly reclaimed tidal saline soils to evaluate the salt tolerance and growht characteristics, and their relationship to dry matter production and nutrient quality of main selected pasture species. Nine temperate grasses (14 varieties) and two forage crops (sorghum and pearl millet) were grown under different mulching treatments with medium sand and red-yellow soils (fine loamy materials of Typic Hapludults) from 1986 to 1988. Tall wheatgrass, tall fescue, reed canarygrass and alfalfa showed a good tolerance to soil salinity, especially tall wheatgrass (cv. Alkar) produced 19.6 ton/ha dry matter yield annualy under mulching treatment with medium sand depth in lcm. Pearl millet (cv. Gahi-3) was also evaluated as a salt tolerable forage species. Under salt stress in newly reclaimed tidal lands, plant showed a decrease in the assimirable leaf area (LA) as well as specific leaf area (SP. LA) and a low leaf weight ratio(LWR), and it resulted in a low concentration of crude protein and low digestible dry matter contents. Absorption of macro and micro elements in the plant on tidal lands was increased markedly.

• Land and Housing Review
• /
• v.1 no.1
• /
• pp.35-42
• /
• 2010

Most of the dredged sand generated from the sewage pipe maintenance project and the government's four-river project are disposed depending on abandonment and filling-up. This is caused by the lack of related recycling technology using dredged sand appropriately and high absorption rate and micro-particles of dredged sand producted from existing sand production system. Thus, this study carried out a quality assessment for the dredged sand produced through the optimum washing and sorting system supplementing problems of existing dredged sand production system as a part of research to examine performance of removing micro-particles and foreign substances. As a result of the assessment, the dredged sand produced through the cleaning and sorting system showed a wide quality improvement effect in absorption rate, 0.08 mm sieve pass amount, clay lump volume and organic impurity content, and it turned out to satisfy both the quality standards of this study, KS F 2573(recycled aggregate for concrete) and KS F 2526(aggregate for concrete) so it could be confirmed that it would be able to be used as an aggregate for concrete in the future.

• Advances in nano research
• /
• v.16 no.4
• /
• pp.375-394
• /
• 2024

The extensive utilization of concrete has given rise to environmental concerns, specifically concerning the depletion of river sand. To address this issue, waste deposits can provide manufactured-sand (MS) as a substitute for river sand. The objective of this study is to explore the application of machine learning techniques to facilitate the production of manufactured-sand concrete (MSC) containing stone nano-powder through estimating the splitting tensile strength (STS) containing compressive strength of cement (CSC), tensile strength of cement (TSC), curing age (CA), maximum size of the crushed stone (Dmax), stone nano-powder content (SNC), fineness modulus of sand (FMS), water to cement ratio (W/C), sand ratio (SR), and slump (S). To achieve this goal, a total of 310 data points, encompassing nine influential factors affecting the mechanical properties of MSC, are collected through laboratory tests. Subsequently, the gathered dataset is divided into two subsets, one for training and the other for testing; comprising 90% (280 samples) and 10% (30 samples) of the total data, respectively. By employing the generated dataset, novel models were developed for evaluating the STS of MSC in relation to the nine input features. The analysis results revealed significant correlations between the CSC and the curing age CA with STS. Moreover, when delving into sensitivity analysis using an empirical model, it becomes apparent that parameters such as the FMS and the W/C exert minimal influence on the STS. We employed various loss functions to gauge the effectiveness and precision of our methodologies. Impressively, the outcomes of our devised models exhibited commendable accuracy and reliability, with all models displaying an R-squared value surpassing 0.75 and loss function values approaching insignificance. To further refine the estimation of STS for engineering endeavors, we also developed a user-friendly graphical interface for our machine learning models. These proposed models present a practical alternative to laborious, expensive, and complex laboratory techniques, thereby simplifying the production of mortar specimens.

• Proceedings of the Korean Society of Life Science Conference
• /
• 2008.10a
• /
• pp.21.1-21.1
• /
• 2008

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.3
• /
• pp.47-52
• /
• 2001

Rapid Prototyping(RP) has been widely applied in designing and developing process of new products. RP can reduce the lead time and expense required to bring a new product form initial concept to production. Among several RP process can dramatically reduce the total build time and be applied for fabrication of large-sized and free form object because it uses in LOM the paper thickness is 0.05∼0.38mm as deposition feature segment. In this study, mechanical properties of pattern with LOM system is studied for optimal design of sand mold casting. The main result is that tensile, compressive strength and pattern size are significantly affected by temperature of hot roll.

• Journal of Conservation Science
• /
• v.38 no.1
• /
• pp.45-54
• /
• 2022

This study examined the production technique of bracket murals in Daeungjeon Hall, Gaeamsa Temple by conducting a analysis of their wall structure, material characteristics, and painting layers. Wall was a single-branch structure with support layer, middle layer, finishing layer, and painting layer. The support layer, middle layer and finishing layer, were produced by mixing sand (quartz, feldspars etc.), and loess. The ratio of above medium sand to below fine sand was approximately 0.7 : 9.3 in the support layer, 4 : 6 in the middle layer and 6 : 4 in the finishing layer, which had a more percentage of above medium sand than the support layer. The analysis of the painting layer showed that natural soil pigment was used to establish a relatively ground layer of up to 50 ㎛, and pigments such as Lead sulfate, atacamite and mercury sulfide were painted on top of the layer. This study's results confirmed that the bracket mural paintings in Gaeamsa Temple are within the category of the production style of murals during the Joseon period. However, the points that the middle layer was formed several times, the significant difference in particle size distribution between the wall, and the absence of chopped straw in the support layer are a feature of bracket mural paintings in Gaeamsa Temple. These properties of murals as material and structure may be viewed for correlation with the degree of damage to wall structure of mural painting and would serve as an important reference to diagnosis the conservation conditions of murals or prepare conservation treatments.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.281-286
• /
• 2001

The development of automobile, vessel, rail road, and machine industry leads increase of foundry production used as their components, which cause a by-product, waste foundry sand (WFS). The amount of the WFS produced in Korea is over 900,000 ton a year, but most WFS buries itself and only 5~6% WFS is recycled as a material in construction materials. In this study, WFS is used as a fine aggregate for concrete. Five types of concretes aimed at the specified strength of 240$\pm$10 kgf/$cm^{2}$ , air contents of 4.5$\pm$1% and slump of 12$\pm$1.5cm were mixed with washed coarse seashore sand(WFS) in which salt was removed and then optimum mix proportion of concrete was determined. Moreover, basic properties such as setting time, workability, bleeding and slump loss of the fresh concrete with WFS were tested and compared with those of the concrete mixed without WFS. In .addition, both compressive strength of hardened concrete at each ages and tensile strength of it at the age of 28 days were measured and discussed.