• The Korean Journal of Applied Statistics
• /
• v.11 no.2
• /
• pp.233-246
• /
• 1998

We made a sample design for next 5 years, based on the population as of 1995, for livestock statistics. In the sample design, we used the stratified one stage sampling method where the sample size depends on the prefixed coefficient of variation. In stratifying the population, we considered the complete linkage method, and decided the number of strata to be the one which yields the minimum sample size. We listed here some difficulties we had for the better sample design in the future.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.36-41
• /
• 1996

Turbulent thermal mixing experiments by the injection of two parallel non-isothermal water jets have been performed. The turbulent velocities and fluctuations under the isothermal conditions have been measured using LDV system. The velocity vectors have been plotted in two dimensions from the data measured at 29$\times$16 points. The thermal mixing experiments also have been conducted, where we used 45 K-type thermocouples with a sheath diameter of 0.020" which were fixed with 5 mm distance in a line at a measured height. The measured heights were 5, 10, 20, 30, 40 cm from the upper end of rectangular nozzles. We measured the turbulent temperatures under the various flow velocity conditions with 12$^{\circ}C$ $\leq$ $\Delta$T $\leq$4$0^{\circ}C$. The sampling frequency and sampling time were about 420 Hz and 10 seconds, respectively. The measured results of equal velocity parallel jets were analyzed axially and radially to obtain the variation of temperature fluctuation.tion.

• Journal of Korean Society of Forest Science
• /
• v.46 no.1
• /
• pp.29-43
• /
• 1980

The sampling methods selected for this area was (1) Simple random sampling (2) Systematic sampling and (3) Sub-sampling. For the calculation of the number of sampling plot, 10 % coefficient of variation was adapted. As a result, 57 plots each for simple random sampling and systematic sampling was calculated. In the sub-sampling method, however, total of 40 plots, which were consisted of 5 Blocks, secondary 4 major units and tertiary 2 minor units, were examined. The reuslts obtained are summarized as follows : 1. The rate of expected error was 9.24% for simple random sampling, 8.36% for systematic sampling and 7.54% for sub-sampling, respectively. Therefore, the sub-sampling was proved to be the most accurate method among the test. 2. The volume calculated by each sampling method was compared to the volume of all stand. The rate of expected error was also lowest in the sub-sampling (0.39%), followed by systematic sampling (4.18%) and simple random sampling (7.92%). 3. Comparing the various reuslts and analysis of these results, the sub-sampling was regarded as the most rapid and economical method because this method had not only the least number of plots but also the least expected error among the tested sampling methods Therefore the sub-sampling is proved to be an ideal sampling method for forest survey.

• Journal of Ecology and Environment
• /
• v.34 no.2
• /
• pp.167-174
• /
• 2011

Black-billed magpies (Pica pica) are a highly sedentary species due to their short and round wings, which are not adequate for long distance flights. We investigated geographic variation in the vocal signals of magpies residing in South Korea and Japan (subspecies sericea). Based on the magpie's limited dispersal ability, we predicted that the variation in vocal signals of black-billed magpies could be explained by geographic barriers such as mountain ranges and straits. We analyzed four-syllable chatter calls of magpies from five localities in South Korea, which are separated by mountain ranges (Seoul, Daejeon, Daegu, Gwangju, and Busan), and two island localities separated from the mainland by straits (Jeju in Korea and Saga in Japan). We found significant differences in the characteristics of magpie chatter calls recorded in the seven localities, and the variation pattern was independent among the variables. Mainland-island differentiation and north-south differentiation were observed. In general, magpies on Saga were the most distinctive. North-south differentiation was observed among the Korean mainland localities. However, the pattern was not related to the presence of putative geographic barriers. We hypothesize that the patterns of geographic variation in the structure of magpie chatter calls residing in South Korea might have been shaped by a sudden expansion of magpies followed by low level of local isolation, which may have led to vocal differentiation. Along with elucidating the vocal environment of Korean magpie populations, more extensive sampling is needed to clarify the functional aspects of geographic variation in the vocal signals of Korean magpies.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1126-1126
• /
• 2001

The paper presented here is the initial part of a larger study, in which it was determined which quality parameters in cheese powder could already be predicted by NIR at an early stage in the process and which could only be predicted at the final stages of the process. This initial study was performed in order to establish the levels and nature of variation within and between batches such that the subsequent data collection could be tackled optimally. The perspectives evolved into more than was originally planned and revealed some interesting uses of NIR-technology. Cheese powder production starts as a batch process, where waste cheese from other dairies is melted down in a vat. The process then turns into a continual process as the vat is emptied and the melted cheese is then filtered, homogenized, pasteurized and finally spray dried. Between each batch the powder is to a greater or lesser degree a mixture of 2 batches. This paper is divided into 2 aspects, one regarding the optimization of sampling time and the other is a study of process dynamics. Optimizing sampling time This initial study included 9 powder samples from 9 different batches produced during one day. The raw materials for the batches were chosen with the aim of creating a relatively high level of variation in the data. The total of 81 samples were taken out at regular intervals and spectra were collected on a NIR-systems 6500 instrument. The subsequent reduction of the data by PCA to score values shows the power of NIR as a tool to determine not only when samples are representative of a certain batch, but also which batches are stable enough to include in a further study. Studying process dynamics To take this experiment a step further 1 of the 81 samples were sent to the laboratory for further analyses. The samples were chosen on the criteria that they covered the spectral variation in the dataset. These samples were analysed for 4 chemical components and 5 physical attributes, which are essential for describing the quality of the product. The latent structure of the 7 samples, using the chemical and physical variables, is totally comparable to the latent structure of the NIR spectra. This outcome makes it possible to describe the dynamics of one day's production both chemically and physically with relatively little resources. Additionally it raises the question as to whether reference values are needed, as the latent structure of the NIR-spectra appears to be sufficient in providing information on the quality of the product. To be able to use NIR in this way would require defining quality limits in the principal component space as opposed to each of the reference values. The potential of NIR applied in an explorative fashion with batch processes opens a whole new gateway for the use of this technology. This study explains yet again after so many years in the field “why I'm crazy about NIR!”.

• Journal of Soil and Groundwater Environment
• /
• v.21 no.6
• /
• pp.179-191
• /
• 2016

In addition to the measurement of the concentration of soil contaminants, the new idea of indicative parameters was proposed to validate the remedial works through the monitoring for the changes of soil characteristics after applying the clean up technologies. The parameters like CFU (colony forming unit), pH and soil texture were recommended as indicative parameters for land farming. In case of soil washing, water content and the particle size distribution of the sludge were recommended as indicative parameters. The sludge is produced through the particle separation process in soil washing and it is usually treated as a waste. The parameters like water content, organic matter content, CEC (cation exchange capacity) and CFU were recommended as indicative parameters for the low temperature thermal desorption method. Besides the indicative parameter, sampling methods in stock pile and the optimal minimum amount of composite soil sample were proposed. The rates of sampling error in regular grid, zigzag, four bearing, random grid methods were 17.3%, 17.6%, 17.2% and 16.5% respectively. The random grid method showed the minimum sampling error among the 4 kinds of sampling methods although the differences in sampling errors were very little. Therefore the random grid method was recommended as an appropriate sampling method in stock pile. It was not possible to propose a value of optimal minimum amount of composite soil sample based on the real analytical data due to the dynamic variation of $CV_{fund{\cdot}error}$. Instead of this, 355 g of soil was recommended for the optimal minimum amount of composite soil sample under the assumption of ISO 10381-8.

• Survey Research
• /
• v.8 no.2
• /
• pp.67-89
• /
• 2007

The Korea National Health and Nutrition Examination Survey(KNHANES) consists of Health Interview Survey, Health Behaviour Survey, Nutrition Survey, and Health Examination, and is designed to produce a broad range of descriptive health and nutritional statistics for sex and age subdomains of the population. These data can be used to measure and monitor the health and nutritional status of the population of Korea. The survey has been conducted three times from 1998. The Korea Centers for Disease Control and Prevention(KCDC) is preparing for the 4th survey which is to be conducted from 2007 through 2009. This study is to design a sample for the 4th survey. The main new feature of the sampling design is using a rolling sampling design method. Since KCDC has imposed some operational requirements, e,g., the needs of producing the annual national statistics and of year-round data collection by some regular staffs, a rolling sampling design method is introduced. This is the first time in history of applying a rolling sampling design for a national-wide large scale survey in Korea. Bringing in the rolling sampling, measurement variation due to different data collectors may be minimized.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.5
• /
• pp.789-796
• /
• 2012

Fingerprinting is a widely used positioning technology for received signal strength (RSS) based wireless local area network (WLAN) positioning system. Though spatial RSS variation is the key factor of the positioning technology, temporal RSS variation needs to be considered for more accuracy. To deal with the spatial and temporal RSS characteristics within a unified framework, this paper proposes an extended signal propagation mode (ESPM) and a fingerprint generation method. The proposed spatiotemporal fingerprint generation method consists of two algorithms running in parallel; Kalman filtering at several measurement-sampling locations and Kriging to generate location fingerprints at dense reference locations. The two different algorithms are connected by the extended signal propagation model which describes the spatial and temporal measurement characteristics in one frame. An experiment demonstrates that the proposed method provides an improved positioning accuracy.

• Journal of Korean Society for Atmospheric Environment
• /
• v.13 no.4
• /
• pp.307-317
• /
• 1997

Samples of fine particle $(d_P<2.5 \mum)$ were taken in Chongju area using a dichotomous sampler. The data set was collected on fifty-eight different days with 24 hour sampling period from October 27, 1995 through August 25, 1996. The samples were analyzed using a proton induced x-ray emission (PIXE) for Na, Mg, Al, Si, S, Cl, K, Ca, Ti, V, Cr, M, Fe, Ni, Cu, Zn, Br and Pb. Values of Fe, Ca, Si, Cu, K and Cl exhibit marked seasonal variations. Mean concentrations for this study had the following order S > Cl > Si > K > Al > Fe on fine particle. Concentrations of Ca, Si and Fe were higher during the spring season compared with any other season. These phenomena may be attributable to soil dust. Cl and K were higher in the winter, which may be explained by combustion of fossil fuel. Higher values for Cu and Zn in the Winter may be due to the combustion and incineration.

• Fisheries and Aquatic Sciences
• /
• v.2 no.2
• /
• pp.199-209
• /
• 1999

Before investigating the long-term variations in macrobenthic communities sampled in the Chokchon macrotidal flat in Inchon, Korea, from 1989 to 1996, we need to understand how environmental factors in the area vary. As potential governing agents of tidal flat communities, abiotic factors such as mean sea level, seawater, air temperature, and precipitation were considered. Data for these factors were collected at equal intervals from 1976 or 1980 to 1996, and were analyzed using a decomposition method. In this analysis, all the above variables showed strong seasonal nature, and yielded a significant trend and cyclical variation. Positive trends were seen in the seawater and air temperatures, and based upon this relationship, it was found that the biological sampling period of our program has been carried out during warmer periods in succession. This paper puts forth some hypotheses concerning the response of tidal flat macrobenthos communities to the changing environment including mild winters in succession.