• Journal of Radiation Protection and Research
• /
• v.41 no.4
• /
• pp.395-401
• /
• 2016

Background: Liquid scintillation counters (LSCs) are commonly used as an analytical method for detecting $^{222}Rn$ in groundwater because they involve a simple sample pretreatment and allow high throughout with an autosampler. The Quantulus 1220 is the best-selling LSC in Korea, but its production was stopped. Recently, a new type of LSC, the 300SL, was introduced. In this study, the 300SL was compared with the Quantulus 1220 in order to evaluate the ability of each apparatus to detect $^{222}Rn$ in groundwater. Materials and Methods: The Quantulus 1220 and 300SL were used to detect the presence of $^{222}Rn$. Radon gas was extracted from a groundwater sample using a water-immiscible cocktail in a LSC vial. The optimal analytical conditions for each LSC were determined using a $^{222}Rn$ calibration source prepared with a $^{226}Ra$ source. Results and Discussion: The optimal pulse shape analysis level for alpha and beta separation was 80 for the Quantulus 1220, and the corresponding pulse length index was 12 in the 300SL. The counting efficiency of the Quantulus 1220 for alpha emissions was similar to that of the 300SL, but the background count rate of the Quantulus 1220 was 10 times lower than that of the 300SL. The minimum detectable activity of the Quantulus 1220 was $0.08Bq{\cdot}L^{-1}$, while that of the 300SL was $0.20Bq{\cdot}L^{-1}$. The analytical results regarding $^{222}Rn$ in groundwater were less than 10% different between these LSCs. Conclusion: The 300SL is an LSC that is comparable to the Quantulus 1220 for detecting $^{222}Rn$ in groundwater. Both LSCs can be applied to determine the levels of $^{222}Rn$ in groundwater under the management of the Ministry of Environment.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.3
• /
• pp.380-385
• /
• 2016

This study analyzed changes in ${\beta}$-glucan content in Agaricus blazei Murill concentrates according to extrusion and extraction conditions. Screw speed and feed rate were fixed to 250 rpm, and 100 g/min, respectively. Moisture contents (20 and 30%) and barrel temperature (130 and $140^{\circ}C$) were adjusted. ${\beta}$-Glucan content of the extruded sample at a moisture content of 20% and barrel temperature of $130^{\circ}C$ was higher compared to other extrusion conditions. ${\beta}$-Glucan content of the extruded sample at a moisture content of 20% and barrel temperature of $130^{\circ}C$ treated with Rohament CL enzyme was higher compared to Viscozyme L, and Plantase TL enzyme treatments under the same extrusion conditions. In conclusion, extrusion and pretreatment with Rohament CL enzyme enhanced yield of ${\beta}$-glucan extract.

• Economic and Environmental Geology
• /
• v.55 no.6
• /
• pp.727-736
• /
• 2022

Ice wedges are subsurface ice mass structures that formed mainly by freezing precipitation with airborne dust and surrounding soil particles flowed through the active layer into the cracks growing by repeating thermal contractions in the deeper permafrost layer over time. These ice masses characteristically contain high concentrations of solutes and solids. Because of their unique properties and distribution, the possibility of harnessing ice wedges as an alternative archive for reconstructing paleoclimate and paleoenvironment has been recently suggested despite limited studies. It is imperative to preserve the physicochemical properties of the ice wedge (e.g., solute concentration, mineral particles) without any potential alteration to use it as a proxy for reconstructing the paleo-information. Thawing the ice wedge samples is prerequisite for the assessment of their physicochemical properties, during which the paleo-information could be unintentionally altered by any methodological artifact. This study examined the effect of thawing conditions and procedures on the physicochemical properties of solutes and solid particles in ice wedge samples collected from Cyuie, East Siberia. Four different thawing conditions with varying temperatures (4 and 23℃) and oxygen exposures (oxic and anoxic) for the ice wedge sample treatment were examined. Ice wedge samples thawed at 4℃ under anoxic conditions, wherein biological activity and oxidation were kept to a minimum, were set as the standard thawing conditions to which the effects of temperature and oxygen were compared. The results indicate that temperature and oxygen exposure have negligible effects on the physicochemical characteristics of the solid particles. However, the chemical features of the solution (e.g., pH, electric conductivity, alkalinity, and concentration of major cations and trace elements) at 4℃ under oxic conditions were considerably altered, compared to those measured under the standard thawing conditions. This study shows that the thawing condition of ice wedge samples can affect their chemical features and thereby the geochemical information therein for the reconstruction of the paleoclimate and/or paleoenvironment.

• The korean journal of orthodontics
• /
• v.25 no.4
• /
• pp.465-485
• /
• 1995

The purpose of this study is to locate the proper position of the lower occlusal plane according to individual skeletal pattern. Cephalometric films of 234 subjects of the control group, 358 of the pretreatment group and 358 of the treated group were analyzed to study proper relationships between vertical dimension ratio(VDR) and lower occlusomandibular plane angle(LOM). The control group was divided into two subgroups by the age. The first subgroup consisted of 113 subjects of the age 14 years and under and with the mean age of 10.82 years. The other subgroup consisted of 113 subjects of the age 18 years and above with the mean age of 23.76 years. The pretreatment group was divided into three subgroups by the age. The first subgroup consisted of 274 subjects of the age 14 years and under with the mean age of 11.36 years. The second subgroup consisted of 54 subjects of the age 14 through 18 years with the mean age of 15.4 years. The last subgroup consisted of 30 subjects of the age 18 years and above with the mean age of 21.35 years. The treated group was also divided into three subgroups by the age. The first subgroup consisted of 145 subjects of the age 14 years and under with the mean age of 12.91 years. The second subgroup consisted of 166 subjects of the age 14 through 18 years with the mean age of 15.64 years. The last subgroup consisted of 47 subjects of the age 18 years and above with the mean age of 21.61 years. Cephalometric films of the sample were traced. Measurements were made to a hundredth using a program specifically prepared for this study, and the results were entered into a 486DX PC. Means and Standard deviations of all the veriables were calculated for each group. Correlation coefficients between pertinent variables were calculated. Significance tests on those coefficients, one-way ANOVA and t-tests between variables or groups were performed. On the basis of the results studied above, certain subjects were selected from the control and the treated groups to locate the proper position of the occlusal plane, and designated as the optimal occluaion group. The subjects of this optimal occlusion group had 1-3 mm overbite, 1-3 mm of overjet and less than 1.75 mm of curve of Spee. A total subjects of 187 in this group consisted 104 treated subjects and 83 control group. Regression analysis was carried out between VDR and LOM, and regression equations were tabulated for this optimal occlusion group. The results were as follows : 1. Highly significant correlations were observed between various variables useful for identifying vertical component of skeletal frame, but any one particular variable did not accurately indicate the magnitude of anterior vertical overbite. 2. Of the variables useful identifying vertical component of skeletal frame, The VDR showed the highest correlation to the LOM. 3. Of the total sample, 80 percent had overbite within the normal range, irrespective of VDR. 4. The optimal occlusion group was divided into 9 subgroups by the age and the anteroposterior skeletal pattern, and correlation coefficient and determination coefficient between VDR and LOM of each group were calculated. Correlation coefficients and determination coefficients were found to be significantly high in all groups. 5. Regression equation was induced for each of the optimal occlusion group to find proper LOM according to the VDR. 6. It was found that the mean value of the cant of occlusal plane itself is not enough for a diagnosis and a treatment plan. Rather, It is very important to locate the proper occlusal plane for an Individual skeletal pattern.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.6
• /
• pp.481-489
• /
• 2011

This study was conducted to evaluate the pressure treatment characteristics of Japanese red pine and Japanese larch skin timber with ACQ-2, CUAZ-2 and CuHDO-1. The effect of moisture content (MC) on preservative treatability was investigated for Japanese red pine sapwood and Japanese larch heartwood, and fixation characteristics of CCA alternatives was also evaluated. Japanese red pine sapwood, which was dried below 30 percent MC, was fully penetrated with preservatives, and minimum requirement of preservative retention for the hazard class H3 was achieved. Through measuring preservative retention gradient in Japanese red pine sapwood, it was confirmed that the retention gradient of CuHDO-1 was steeper than that of both ACQ-2 and CUAZ-2. In particular, it was intensified at a higher MCs of wood samples (25∼30%). Japanese larch heartwood did not meet the minimum requirement of penetration and retention for the hazard class H3 over the range of pretreatment MCs tested. With presteaming under $121^{\circ}C$ for 12 hours, the treatability of Japanese larch heartwood was enhanced to meet the minimum requirement for the hazard class H3. The fixation rate of copper was much more faster under drying condition compared with nondrying condition; more than 95% of copper were fixed in 3~6 days and 1 day under drying conditions in Japanese red pine sapwood and Japanese larch heartwood, respectively. After 3-week fixation period at ambient temperature, the amount of mobile copper in treated wood sample that remains available for leaching from treated wood was the highest in the wood samples treated with ACQ-2, followed by CuHDO-1 and CUAZ-2. It was proportional to the amount of copper in treating solution.

• The korean journal of orthodontics
• /
• v.37 no.3 s.122
• /
• pp.231-240
• /
• 2007

Objective: The purpose of this study was to investigate the maxillary protraction effects of the Tandem Traction Bow Appliance (TTBA), a new appliance devised several years ago for the treatment of growing skeletal Class III patients. Methods: Participants were 88 Korean children (42 boys, 46 girls) with skeletal Class III malocclusion treated with TTBA at the orthodontic clinic of Ewha Womans University Mokdong Hospital. Mean age at the start of treatment was 7.5 years${\pm}$1.5 years. Mean treatment periods were $13{\pm}3$ months. Pretreatment and posttreatment lateral cephalograms were traced and superimposed by the same investigator and analyzed by modified McNamara analysis and pitchfork analysis. Changes were evaluated with paired t-tests at a significance level of p<0.05. Results: The maxilla and maxillary dentition moved forward. The mandible moved backward, although not significantly; and the mandibular dentition moved forward. The net dental changes combined with the apical base change resulted in a favorable total molar relationship correction. Net dental movement was 26% and the apical base change 74% of the total molar relationship correction. Conclusion: These results suggest that TTBA has a maxillary protraction effect that can be useful in the treatment of growing skeletal Class III malocclusion with maxillary deficiency.

• The korean journal of orthodontics
• /
• v.37 no.1 s.120
• /
• pp.65-72
• /
• 2007

Objective: This study was performed to investigate the influences of extraction and nonextraction treatment on smile esthetics by measuring dental arch width changes. Methods: Pretreatment and posttreatment study models of 30 first premolar extraction cases and 30 nonextraction cases were randomly selected to determine whether extraction treatment results in narrow dental arches, and a consequent unaesthetic smile. Arch widths were measured from the cusp tips of the canines and the first molars. Posterior arch widths were also measured at a constant arch depth derived by averaging randomly chosen nonextraction models. Results: The intercanine widths increased significantly in the extraction sample, whereas the intermolar widths decreased significantly. The arch width at a standardized arch depth was significantly wider in the extraction subjects. Conclusion: These results elucidate that constriction in arch width is not a materialized consequence of extraction treatment. It leads to postulate that an esthetically compromising effect from narrow dental arches on smile is hardly anticipated with extraction treatment.

• Journal of Ginseng Research
• /
• v.44 no.3
• /
• pp.424-434
• /
• 2020

Background: Amino acids are one of the major constituents in Panax ginseng, including neutral amino acid, acidic amino acid, and basic amino acid. However, whether these amino acids play a role in ginsenoside conversion during the steaming process has not yet been elucidated. Methods: In the present study, to elucidate the role of amino acids in ginsenoside transformation from fresh ginseng to red ginseng, an amino acids impregnation pretreatment was applied during the steaming process at 120℃. Acidic glutamic acid and basic arginine were used for the acid impregnation treatment during the root steaming. The ginsenosides contents, pH, browning intensity, and free amino acids contents in untreated and amino acid-treated P. ginseng samples were determined. Results: After 2 h of steaming, the concentration of less polar ginsenosides in glutamic acid-treated P. ginseng was significantly higher than that in untreated P. ginseng during the steaming process. However, the less polar ginsenosides in arginine-treated P. ginseng increased slightly. Meanwhile, free amino acids contents in fresh P. ginseng, glutamic acid-treated P. ginseng, and arginine-treated P. ginseng significantly decreased during steaming from 0 to 2h. The pH also decreased in P. ginseng samples at high temperatures. The pH decrease in red ginseng was closely related to the decrease in basic amino acids levels during the steaming process. Conclusion: Amino acids can remarkably affect the acidity of P. ginseng sample by altering the pH value. They were the main influential factors for the ginsenoside transformation. These results are useful in elucidating why and how steaming induces the structural change of ginsenoside inP. ginseng and also provides an effective and green approach to regulate the ginsenoside conversion using amino acids during the steaming process.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.9
• /
• pp.940-948
• /
• 2006

Fluorescence measurements of dissolved organic matter(DOM) have the superior advantages over other analysis tools for applying to water quality management. They are simple and fast and require minimal pretreatment of samples. Fluorescence index($F_{450}/F_{500}$), synchronous spectra, and fluorescence excitation-emission matrices(EEM) of various DOM samples were investigated to discriminate autochthonous/allochthonous composition, protein-like fluorescence, fulvic-like fluorescence, humic-like fluorescence, terestrial humic-like fluorescence by comparing among the real DOM samples of different origins with the help of literature. The samples used included standard purified DOM, lake, river and wastewater treatment effluent. The relative distribution of various DOM composition was derived from the ratios of each fluorescence region. The results were very consistent with those expected from the sample properties. Allochthonous and terrestrial humic-like fluorescence were more prominent in the samples with abundant soil-derived DOM components. In addition, the protein-like fluorescence property was more pronounced in the samples where strong algal or microbial activities were expected. It was also shown that the ratio of protein-like/terrestrial humic-like fluorescence obtained from synchronous spectrum and fluorescence EEM could be used as an indicator for the evaluation of wastewater treatment on the downstream water quality of rivers and for the prediction of the degree of algal/microbial activities in lakes. It is expected that the results of this study will provide the basic information to develop the future water quality management techniques using DOM fluorescence measurements.

• Applied Chemistry for Engineering
• /
• v.29 no.3
• /
• pp.356-361
• /
• 2018

It is common to analyze volatile organic compound (VOC) or semi-VOC (SVOC) in a sample composed of a complex matrix consisting of multiple components such as bloods through a separation process. Adsorption is a physical phenomenon in which certain components accumulate on the surface of other phases. In order to overcome difficulties in the pretreatment process, an adsorption is frequently used. Solid phase microextraction (SPME) equipment with porous carbon carboxen (CAR) is an example of adsorption application. In this study, the adsorption of 4-octylphenol to carboxen was examined. To do so, the extraction efficiency for such solvents as dichloromethane ($CH_2Cl_2$, DCM), ethylacetate ($CH_3COOC_2H_5$, EA) and diethylether ($C_2H_5OC_2H_5$, $Et_2O$) was studied and also the derivatization reaction for 4-octylphenol with reagents of bistrimethylsilyltrifluoroacetamide (BSTFA), methylchloroformate (MCF) and pentafluorobenzylbromide (PFBBr) was compared. The combination of DCM and BSTFA showed good performance thus they were adopted for this study. Thermodynamic adsorption experiments showed that the adsorption process was endothermic and Freundlich isotherm equation was more suitable than Langmuir isotherm. It was also found that the adsorption followed a pseudo-$2^{nd}$ order kinetic model.